• 한국의류학회지
• /
• 제47권2호
• /
• pp.353-370
• /
• 2023

In this study, the performance of ultrasonic cleaners for ultrasonic washing, which is one of the wet cleaning methods, was evaluated. The washing performances of ultrasonic cleaners were compared with commercial washing machines under normal and wool courses based on different parameters such as detergency, wrinkle formation, fabric damage, dimensional stability, and germ removal ability. Cotton, silk and wool were used in this experiment. Results revealed that the ultrasonic washing detergency of cotton fabrics was lower than that of commercial washing machines under the normal course and similar to that of commercial washing machines under the wool course. Detergency of silk fabrics was similar under both normal and wool courses. In terms of wrinkle formation and dimensional stability, ultrasonic cleaners showed lesser wrinkles and lower shrinkage than commercial washing machines. Considering damage evaluation, ultrasonic cleaners more effectively removed soil without damaging fabrics compared with commercial washing machines. The bacteria removal rate of both cotton and silk was more effective than the wool course of a commercial washing machine. Thus, this study compares the performance of ultrasonic cleaners and commercial washing machines and provides meaningful results related to ultrasonic washing performance.

• 한국의류산업학회지
• /
• 제9권6호
• /
• pp.671-678
• /
• 2007

Formulations of compact and supercompact heavy-duty detergents, which are being used widely around the world, differ from those of conventional heavy-duty detergents. Significant differences in composition exist between the compact detergents and the conventional detergents. The compact detergents have a higher content of surfactants, oxygen bleach and enzymes than the conventional detergents. We have studied to find the most effective washing conditions of artificially soiled cloths with a commercial, supercompact, heavy-duty detergent and a drum type washing machine which is becoming the preferred type in Korea. Moreover, we have studied the washing performance with an impeller type washing machine, which has heretofore been the most popular type in East Asia. With the drum-type washing machine, washing performances improved as the washing temperatures went up and the washing times were lengthened. Though the rate of soil removal with a double recommended dosage was higher than with the recommended amount at $20^{\circ}C$, the effects of the higher dosage decreased as the washing temperatures increased. Finally, the washing performances with the two different dosages were the same at $60^{\circ}C$. The washing performances at $40^{\circ}C$ with the recommended dosage for 90 minutes were the same as with the double recommended dosage for 45 minutes. The soil removal efficiencies with the impeller-type washing machine were much lower than those of the drum-type washing machine. The reasons for this were the higher bath ratio that led to the lower concentration of wash liquor, the shorter washing time, and the lower washing temperature.

• 한국의류학회지
• /
• 제30권11호
• /
• pp.1589-1597
• /
• 2006

Nowadays, Korean consumers prefer drum-type washing machines to pulsator-type washers. Washing is a complex process involving the interaction of numerous physical and chemical influences. The main factors in the washing operations are the washing chemistry of the detergent along with the mechanical input, the wash temperature, and the time provided by the washing machine. Heavy-duty detergents that are used in drum-type washing machines contain different components from those used in vertical-axis washing machines. The bath ratio and the mechanical actions to which laundry is subjected are different between the drum-type and the vertical-axis washing machines. In this study we examined the effects of wash temperature, wash time, detergent concentration, and revolution speed on the removal of soils from artificially soiled cloths in a drum-type washing machine with heavy-duty commercial detergent. We used multiple regression analyses to find the relative importance of the factors and the optimum washing conditions. The results of these experiments showed that the washing temperature was the most important factor in the effective removal of most soils. This was followed by the washing time, the detergent concentration, and finally the revolution speed. In this study it was found that superfluous amounts of detergent did not sufficiently increase the soil removal rate. Koreans who are used to washing with cold water should increase the wash time to launder more efficiently.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1849-1852
• /
• 2005

An automatic cap-washing machine is developed for rinse and dry of synthetic resin cap which is used in spring water bottle. This machine should be achieved all processes washing and drying, array, transfer automatically. A cap is washed by an ozonized water and pure water first. Next, a cap is dried by a hot wind drying equipment. In this paper, structural and modal analysis for the cap-washing machine is carried out to check the design criterion of the machine. The analysis is carried out by FEM simulation using the commercial software, CATIA V5. And a fictitious mass properties was used for the analysis of the machine. Finally, the machine performance is shown to be satisfactory.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.88-93
• /
• 2012

In this study, a multi-body dynamic model is developed for a washing machine and the dynamic behaviors of the machine are investigated. The mechanical properties such as spring constants and damping factors are measured from vibrational experiments. With these experimentally obtained mechanical properties, a computer simulation model for the washing machine is established by using a commercial multi-body dynamics software DAFUL. In order to verify the developed simulation model, the dynamic responses computed from simulation are compared to the responses measured from vibration experiments. In addition, the effects of the stiffness and damping factors on the dynamic responses are also analyzed.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.296-305
• /
• 2006

This study evaluate the effect of laundering on the deformation of knitted spandex/cotton fabrics compared with that of knitted cotton fabrics. Commercial knitted spandex/cotton and knitted cotton fabrics for T-shits were laundered in a drum-type washing machine and dried in a tumble dryer. Wale spirality, shrinkage, elastic recovery and surface contour of knitted fabrics were investigated under different laundering conditions: washing temperature, presoaking time and washing cycles. Knitted spandex/cotton fabrics had a lower angle of spirality than knitted cotton fabrics. After the first washing cycle, the angles of spirality of all the fabrics had decreased greatly. Knitted cotton fabric of low density deformed more than that of higher density. Knitted spandex/cotton. fabric of low density shrank less, because of the greater extension given during heat-set. Permanent elongation length at the 80$\%$ extension was longer than at the 50$\%$ extension, and the knitted spandex/cotton fabric which was expanded greatly during heat-set had a lower elastic recovery rate. The surface appearance of the knitted spandex/cotton fabrics was worsl~ than that of the knitted cotton fabrics before laundering and after repeated laundering, because of the much protruded cotton fibers from the yarns.

• 과학기술학연구
• /
• 제13권2호
• /
• pp.173-206
• /
• 2013

2003년 출시된 은나노 세탁기는 초기에 나노기술이 접목된 가전제품으로서 큰 관심을 끌었으나, 이후에는 은나노 없는 은나노 세탁기라는 조롱을 받기도 했다. 나노기술의 규제와 관련하여 미국 환경보호청 역시도 일관되지 않은 모습을 보였다. 이처럼 나노기술에 대한 규제 문제와 나노물질의 범주 설정 문제는 서로 결부된 모습을 보였는데, 본 논문은 은나노 세탁기를 둘러싼 논쟁들을 보다 구체적으로 분석하면서 은이온과 은나노의 경계가 해당 물질에 대한 위험인식과 어떻게 상호작용하며 변화했는지를 추적할 것이다. 논쟁의 초기에 두 물질 간의 경계는 한국과 미국의 맥락에 따라 서로 다른 형태의 위험인식을 거치면서 뚜렷해졌다. 하지만 미국의 환경 단체들은 은나노 물질에 대한 위험인식을 바탕으로 은나노 물질에 대한 새로운 정의를 제안했고, 미국의 환경보호청과 한국의 환경부가 나노물질을 분류하는 기준이 변화하기 시작했다. 본 논문은 은나노 세탁기를 둘러싼 최근의 역사에 대한 분석을 통하여 단순히 은이온과 은나노라는 물질의 정의가 사회적으로 구성되었다는 점을 확인하는데 그치지 않고, 특정 물질에 대한 위험인식이 그 물질에 관한 존재론적 논의에 어떤 방식으로 영향을 끼칠 수 있는지를 면밀히 살펴보고자 한다.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.222-233
• /
• 2010

Developed in this research is a TP (tangible prototyping) system, which consists of two modules; (1) a virtual reality model to evaluate the functions and appearance of the product, and (2) a haptic device to emulate tactile and kinesthetic properties of mechanical dial knobs. As an example, a washing machine is modeled using a commercial CAD system and transformed in VRML and X3D formats. Some dynamic behaviors and kinematic characteristics are programmed using X3D script and Java. Various haptic behaviors of the dial are generated by modulating torque profile according to the rotation angle. A torque profile measuring system is developed to evaluate the behaviors of the haptic dial physically. Haptic sensibility evaluations are accomplished using the TP by semantic differential method.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.447-459
• /
• 1994

The purpose of this study is to evaluate of shear bond strength of light-curing composite resin to light-curing glass ionomer cement. Composite resin and glass ionomer cement have been widely used as an esthetic filling materials in dental clinics. To achieve better clinical results, sandwich technic was developed with conpensating for disadvantages of these two materials. Especially, light-curing glass ionomer cement provided greately improved bonding strength of teeth or composite resin, and then excellent clinical results can be acquired. In this study, 6 commercial light-curing glass ionomer cements(3 commercial restorative materials : Fuji II LC, Variglass VLC, Vitremer, and 3 commercial lining materials : Fuji Lining LC, Baseline VLC, Vitrebond) were devided two groups. According to manufacturer's appointment, no surface treatment was referred to N groups. Supposing. of clinical practice, surface grinding with water spray at 320 grit sand paper, 40 seconds etching with 37% phosphoric acid, 20 seconds washing, 20 seconds air drying was referred to N groups. Totally 12 experimental groups were devided, and all 120 specimens from 10 specimens of each groups were made. After light-curing composite resin was bonded to light-curing glass ionomer cement, shear bond strength was tested by Instron universal testing machine between glass ionomer cement and composit resin. The data were analyzed statistically by Student's t-test and ANOVA. The obtained results were as follows; 1. In light-curing glass ionomer cement, restorative materials showed higher shear bond strength to composite resin than lining materials(p<0.05). 2. Variglass VLC of restorative material group and Baseline VLC of lining material group have highest shear bond strength to composite resin(p<0.001). 3. In light-curing glass ionomer cement, surface grinding and acid etching reduced shear bond strength to composite resin(p<0.001)}. 4. VGN group 1s highest shear bond strength to composite resin, VBE group is lowest shear bond strength to composite resin(p<0.001).

• 비파괴검사학회지
• /
• 제21권6호
• /
• pp.630-633
• /
• 2001

본 연구에서는 국내에서 생산되는 에어콘용 팬의 진동해석을 위해 ESPI를 이용하였다. 기존의 진동해석 실험으로 많이 사용되는 가속도계를 에어콘용 팬에 직접 적용하는 데에는 형상의 제약 등으로 적용이 어려워 비접촉 진동해석기술을 요구하였다. 실험은 가진 장치를 이용하여 팬에 가진을 하고 ESPI를 이용하여 진동모드 및 고유주파수, 고유주파수의 범위를 검사하였다. 또한, 실험결과는 유한요소 해석과 비교되었으며, 실험결과로부터 실제 팬의 사용 회전수에서 제품의 신뢰성을 평가하였다 본 연구에서 사용된 ESPI는 품질개선을 위한 재질변화 또는 형상변화 시 설계측면에서 효과적인 설계정보를 제공할 수 있으며, 기존의 진동해석 기술의 단점을 보완할 수 있으리라 사료된다.