• Journal of Environmental Science International
• /
• v.24 no.10
• /
• pp.1253-1264
• /
• 2015

This study assessed the fertilizing value of struvite deposit recovered from swine wastewater in cultivating Chinese cabbage. Struvite deposit was compared with commercial fertilizers: complex, organic and compost to evaluate the fertilizing effect of struvite deposit. Laboratory pot test obviously presented that the struvite deposit more facilitated the growth of Chinese cabbage than organic and compost fertilizers even though complex fertilizer was the most effective in growing Chinese cabbage. It was revealed that the growth rate of Chinese cabbage was simultaneously controlled by phosphorus (P) and potassium (K). Also, the nutrients such as nitrogen (N), P, K, calcium (Ca) and magnesium (Mg) were abundantly observed in the vegetable tissue of struvite pot. Specifically, P was the most abundant component in the vegetable tissue of struvite pot. Meanwhile, the utilization of struvite as a fertilizer led to the lower accumulation of chromium ($Cr^{6+}$) than other pots, except for compost fertilizer pots, and no detection of cadmium (Cd), arsenic (As) and nickel (Ni) in the Chinese cabbage. The experimental results proved that the optimum struvite dosage for the cultivation of Chinese cabbage was 2.0 g struvite/kg soil. On the basis of these findings, it was concluded that the struvite deposits recovered from swine wastewater were effective as a multi-nutrient fertilizer for Chinese cabbage cultivation.

• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.29-35
• /
• 2016

This study evaluated the fertilizing value of struvite deposit recovered from swine wastewater in cultivating lettuce. Struvite deposit was compared to complex fertilizer, organic fertilizer and compost to evaluate the fertilizing effect of struvite deposit. Laboratory pot test showed that the struvite deposit better enhanced lettuce growth in comparison to commercial fertilizers. It was revealed that the growth rate of lettuce was simultaneously controlled by phosphorus (P) and magnesium (Mg). Moreover, nutrients such as nitrogen (N), P, K, calcium (Ca) and magnesium (Mg) were abundantly observed in the vegetable tissue of struvite pot. Meanwhile, struvite application led to the lower accumulation of mercury (Hg), lead (Pb), chromium ($Cr^{6+}$) and nickel (Ni). In addition, no detection of cadmium (Cd), arsenic (As) and nickel (Ni) in the lettuce tissue was observed in struvite application pots. The experimental results proved that the optimum struvite dosage for lettuce cultivation was 0.5 g struvite/kg soil. The column experiments clearly showed that ammonia nitrogen was more slowly released from struvite deposit than from complex fertilizer. Consequently, it was concluded that the struvite deposits recovered from swine wastewater were effective as a multi-nutrient fertilizer for lettuce cultivation.

• Acta Via Serica
• /
• v.7 no.2
• /
• pp.133-152
• /
• 2022

Both in popular perception and specialized literature, the Achaemenid Empire, for over two centuries the most important player from the Aegean to the Indus, is rarely evoked in correlation with the complex of socio-cultural dynamics which shaped the spaces of what has become known as the Silk Road(s). Building on the case study of the Pazyryk carpet on the one hand (King 2021, 353-361, Linduff and Rubinson 2021, 88-97), and of the spread of an artistic motive such as the quatrefoil on the other (Kim 2021), this paper explores the rich and complex nature of the commercial networks that flourished across Central Asia under the aegis of Achaemenid Great Kings. Both archaeological and literary evidence shall be discussed (especially the Aramaic Documents from Ancient Bactria: Naveh and Shaked 2012, and now King 2021, 315-320). If taken together and read against the grain, such material is significant for the following reasons. First, it suggests the existence - and the scale - of commercial activities directly fostered or indirectly promoted by the imperial administration in Central Asia, an area of crucial importance within the Achaemenid domains, but for which our evidence is rather scanty and difficult to assess. Second, it shows how the Achaemenid "Imperial Paradigm" (Henkelman 2017) affected the social and economic landscape of Central Asia even after the demise of the Empire itself, thus considerably shaping the world of the Silk Road(s) a century before the Ancient Sogdian Letters (de la Vaissière 2005, 43-70) or Zhāng Quiān's famous report.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5274-5280
• /
• 2013

The aim of this study is to analyze the general satisfaction of the commercial areas near Cheonan central bus terminal and the rail-station and to extract various environmental factors of the city center which give effect to the user satisfaction of commercial area. As the result of the analyses, the environmental factors of the city center make a difference between the commercial areas of Cheonan central bus terminal and of the station in the aspects of user satisfaction. The user satisfaction of the commercial areas is appeared highest in 'comfort of walking environments' and 'convenience of commerce business transaction' which were environmental factors of the city center. For reactivation of the commercial area near Cheonan rail-station are needed improvement of walking environments and relocation of facilities as complex mall and bank etc.

• Journal of Korean Library and Information Science Society
• /
• v.45 no.3
• /
• pp.395-414
• /
• 2014

This study considers that the establishment of a public library within multi-use complex is one of the most effective ways to expand infrastructure of public libraries in Korea. A survey on the complexation rates of public libraries in Seoul was made through on-the-spot visits and telephone interviews. It turned out that out of all 112 public libraries in Seoul, 55 of them are in multi complex buildings. In order to efficiently establish public libraries to multi-use complex, absolute consideration on the size, location, and space should be made. Moreover, if necessary, additional complexation with commercial facilities, schools, and local government buildings should be made.

• Archives of Pharmacal Research
• /
• v.18 no.1
• /
• pp.22-26
• /
• 1995

The solubility and dissolution rate of naproxen (NPX) complexed with 2-hydroxypropyl-.betha.-cyc-lodextrin (2-HP.betha.CD) using coprecipitation, evaporation, freeze-drying and kneading method were investigated. Solubility of NPX linearly increased (correlation cefficient, 0.995) as $2-HP\betaCD$ concentraction increased, resutling in $A_l$ type phase solubility curve. Inclusion complexes prepared by four different methods were compared by different methods were compared by dfferential scanning calorimetry(DSC). The NPX showed sharp endothemic peak around $156^{\circ}C$ but inclusion complexes by evaporation, freeze-drying and kneading method showed very broad peak without distinct phase transtion temperature. In contrast, inclusion complex prepared by coprecipitation method resulted in detectable peak around $156^{\circ}C$ which is similar to NPX, suggesting incoplete formation of indusion co plex. Dissolution rate of inclusion complexes prepared by evaporation, frezz-drying and kneding except coprecipitation method was largely enhanced in the simultaed gastric and intestinal fluid when compared to NPX powder and commercial $NA-XEN^\registered$tablet. However, about 65% of NPX in gstric fluid. in case of inclusion complex prepared by coprecipitation method, formation of inclusion complex appeared to be incoplete, resulting in no marked enhancement of dissolution rate. From these findings, inclusion complexes of poorly water-soluble NPX with $2-HP\betaCD$ were useful to increase soubility and dissolution rate, resting in enhancement of bioavailability and minimization of gastrointestinal toxicity of drug upon oral administration of inclusion complex.

• Wind and Structures
• /
• v.13 no.6
• /
• pp.519-528
• /
• 2010

A meteorological model, RAMS, and a commercial computational fluid dynamics (CFD) model, FLUENT are combined as a one-way off-line nested modeling system, namely, RAMS/FLUENT system. The system is experimentally applied in the wind simulation over a complex terrain, with which numerical simulations of wind field over Foyeding weather station located in the northwest mountainous area of Beijing metropolis are performed. The results show that the method of combining a meteorological model and a CFD model as a modeling system is reasonable. In RAMS/FLUENT system, more realistic boundary conditions are provided for FLUENT rather than idealized vertical wind profiles, and the finite volume method (FVM) of FLUENT ensures the capability of the modeling system on describing complex terrain in the simulation. Thus, RAMS/FLUENT can provide fine-scale realistic wind data over complex terrains.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.773-781
• /
• 1999

A new technique to fabricate complex-shaped mullite has been developed through gelcasting without organic binder. The suspension of a commercial mullite powder and boehmite-SiO2 sol as binder was elecrtrosterically stabilized. Ammonium polymetharylyate was employed as a dispersant for the electrosteric stabilization. Complex-shaped bodies were made through casting and gelation at room temperature. The green bodies were dried at a temperature of 30$^{\circ}C$ and relative humidity of 98% without crack development. The dried bodies were then pressureless-sintered at 1650$^{\circ}C$ for 2 h to get a relative density of 98% The Vickers hardness and 4-point flexural strength of sintered parts were 11.0 GPa and 150MPa respectively which are similar to those of commercially available sintered mullite.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.117-126
• /
• 2012

The purpose of this paper is to analysis spatial locations for public sector's development of mixed-use complex. The results of analysis of location characteristics and public sector's participation conditions are as follows. The central commercial district of new town, surroundings of new railway station, and old town center are likely to be appropriate in the case of a functional mixed-use considering acceptable use in accord with mixed-use complex. Development potential is also high at places such as railway adjacent area in old town and relocation of downtown improper facilities including previous three cases. And development of various size such as lot, block and district can be applied at central commercial district of new town, center and subcenter of old town, surroundings of new railway station. The result of analysis of public sector's participation conditions is appropriate in central commercial district of new town by public sector, relocation of downtown improper facilities and old site of transferring public facilities. They can be contribute to grow up new town by public-private partnership and to improve urban circumstances and publicness by development old site coupled with new site of transferring public facilities.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.360-366
• /
• 2017

In commercial vehicles such as frame-based mid-size trucks, it is easy to reduce vibration caused by driveline with the cab mount system. There are no critical driveline vibration problems associated with these vehicles up to now. However, in the case of a similar grade of monocoque type mini-bus, there are no effective vibration isolation components such as a cab mount. Vibration caused by driveline is quite a complex problem to understand in terms of which part governs the phenomenon and how the problem can be solved. Thus, we have to manage the design factor about the driveline and mount system strictly at the early stage of vehicle development. Low frequency vibration caused by the driveline system is investigated in this study. We created the CAE driveline model and analyze low frequency vibration. Then contribution analysis about each design factor of driveline and mount system is performed. Finally, we can obtain the optimized design factor for a driveline system of a mini-bus, which is verified by the vehicle test results.