• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.94-103
• /
• 2015

This study analyzes the influence factors on elderly pedestrian accident. Elderly people are easy to be badly injured by car accidents compared to younger people. Therefore, various plans and measures are required to protect elderly pedestrian from accidents. However, pedestrian accidents studies only focused on microscopic factors such as attribute of driver, pedestrian, road design. In order to prevent pedestrian accident and reduce the severity of the accident, not only microscopic factors but macroscopic variables such as urban planning and facility should be considered. In this regard, this study develops an ordered probit model introduced the characteristics of urban facility which were not considered in the previous studies. The result shows that there is higher level of accident severity in such areas as large commercial area, well-developed area with transportation infrastructure service and non-pedestrian safety zone. Thus, various and appropriate countermeasures should be prepared in order that pedestrian accident can be prevented in the areas mentioned above. In addition to the aforementioned variables, it is revealed that other variables including vehicle speed, gender and age of pedestrian, weather condition, type of vehicle, etc. partly affect the severity of pedestrian accident.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.17-21
• /
• 2011

Vehicle safety device such as active headrest and rear detection system has been developing as people are interested about rear end collision more than head on or than front. However, there is no any standard or criterion in order to evaluate vehicle safety device for rear end collision. Also there is no test protocol about rear end collision in vehicle experiment. Therefore, this research developed scenario for experiment about rear end collision in vehicle experiment. Also this research evaluated dangerousness about vehicle test and fitness about re-enacting rear end collision using scenario developed using commercial software (PC-Crash) which can re-enact vehicle collision in virtual vehicle experiment. Scenario developed according to statistics from National Highway Traffic Safety Administration and German In-Depth Accident Study. Scenario has twelve cases which composed of Re-LVS (Rear end Leading Vehicle Stop), Re-LVM (Rear end Lead Vehicle Moving) and scenario for evaluation about malfunction of active headrest.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.63-72
• /
• 2014

In this paper, characteristics and types of vehicle accidents involving buses that differ from common passenger cars are analyzed. When heavy vehicles are involved in collision accidents, the external impulse conveyed through bus tire from road surface cannot be ignored, so the conventional rigid-body impact model cannot be applied. As a solution, an analysis model which directly considers the tire impulse or considers the bus as moving barrier has been proposed. Also, as there are many instances in which the location of contact point or coefficients related to rotational motion cannot be estimated, utilization of point-mass collision model has been sought. By applying the proposed analysis model to an actual accident case and comparing with the result of the conventional analysis which does not consider the tire impulse, it is shown that the velocity of bus and other values close to the actual amount can be obtained.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.570-576
• /
• 2017

Trucks take up more portions than cars on highways. Due to this, road use relatively diminish and it serves locally as a threatening factor to nearby drivers. Baggage car accident has distinct characteristics so that it needs the application of different analysis opposed to ordinary accidents. Accident prediction model, one of accident analyses, is used to predict the numbers of accident in certain parts, establish traffic plans as well as accident prevention methods, and diagnose the danger of roads. Thus, this study aims to apply the accident rate of baggage car on highways and calculate the correction factor to be put in the accident prediction models. Accident data based on highway was collected and traffic amounts and accident documents between 2014 and 2016 were utilized. The author developed an accident prediction model based on numbers of annual accidents and set mean annual and daily traffic amounts. This study intends to identify the practical accident prediction model on highway and present an appropriate solution by comparing the prediction model in accords with the accident rate between baggage cars.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.34-39
• /
• 2001

The median barrier is one of the roadside hardware to prevent severe human and property damage from highway traffic accidents. The foreign standard of concrete median barrier was introduced and implemented without modification fitting to domestic vehicle and highway condition. In a car accident, median barrier doesn't protect vehicle effectively, especially for heavy vehicle such as bus and heavy truck. The purpose of this study is to develop the optimal performance design of concrete median barrier using the design of experiment with crash simulation analysis which is done by Pam-Crash that is one of the commercial crash simulation software. As a result of this study, an optimal design of concrete median barrier is obtained considering von Mises stress, volume and COG acceleration of truck.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.85-95
• /
• 2009

According to the accident statistics published by the National Police Agency in 2007, the number of commercial vehicle accidents explains 3.5 percent of the total number of traffic accidents of the year. Compared to other types of vehicles commercial vehicles may provide more serious damages to both driver himself and passengers. Thus, they generate more serious social and economic problems. There have been various forms of systems such as a digital speedometer or a black box to meet the social requirement for reducing traffic accidents and improving safe driving. However, since the current systems are based on the data often accidents happened, there are lots of limitations to control drivers in real-time. Also, the current speedometers provide drivers with only speeds of vehicles and RPM information regardless of actual dangerous drive behaviors. Therefor, they lack of the effectiveness in terms of safety. In this research, real-time information systems for improving driver safety based on automatic risky driving behaviors, and thresholds to determine risky driving patterns were studied.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.6
• /
• pp.49-61
• /
• 2009

Recently, a great attention has been paid to a vehicle black box device in the auto markets since it provides an accident re-construction based on the data which contains audio, video, and some meaningful driving informations. It is expected that the device will get to promote around commercial vehicles and the market will greatly grow within a few years. Drivers who equips the device in their car believes that it can find the origin of an accident and help an objective judge. Unfortunately, the current one does not provide the integrity of the data stored in the device. That is the data can be forged or modified by outsider or insider adversary because it is just designed to keep the latest data produced by itself. This fact cause a great concern in car insurance and law enforcement, since the unprotected data cannot be trusted. To resolve the problem, in this paper, we propose a novel real-time integrity protection scheme for vehicle black box device. We also present the evaluation results by simulation using our software implementation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.335-343
• /
• 2012

In the study, evaluation indicators that should be considered in applying traffic calming schemes were developed, and it was intended to analyze the importance of indicators that should most considered in evaluation traffic calming scheme through AHP analysis on the basis of it. The result of the study is summarized as follows. The result of evaluation indicators may be summarized by dividing into residential area and commercial area. In category, the safety is shown to be more important than other indicators in the analysis when evaluation (residential area is 0.514 and commercial area is 0.439). Importance of evaluation indicators was analyzed in order Average Vehicle Speed, Traffic Accident Severity, and Pedestrian Separation. Residential areas to help keep the safety of pedestrians 'Average Vehicle Speed' as the major indices were derived. In commercial areas were analyzed as an important indicator Pedestrian Separation. Because there are so many pedestrians. When applying the effect of Traffic Calming, residential is greater than the commercial area.

• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.18-23
• /
• 2010

This paper describes a cause of fire accidents on power system fire DC electric traction vehicles. We investigated fire scene of power line for DC electric traction vehicles. From analysis results, the cause of fire on power line turned out line to ground fault between a feeder of electric power services(pantagraph) and DC electric traction vehicle roof. Fire accident of DC electric traction vehicles be assumed that electric sparks had been produced between the pantagraph and the power line conductor by repetitively making contact and separation, maybe if some material like branches get in between connecting rod it makes progress line to ground fault. ZnO arresters are widely used to protect DC electric traction vehicles against overvoltages caused by lightning or switching surges. However, the arresters are deteriorated by commercial overvoltages and/or lightning one. The deteriorated arresters could lead power failures, such as line to ground fault by a thermal runaway resulting from the increases in leakage current even in a nominal power system voltage. Finally, the power failures would be causative of the fire accident.