• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.193-204
• /
• 2014

Shale gas has caused a change in the dynamics of gas market since development of horizontal drilling technic and hydraulic fracturing technic caused its commercial production. The commercial amount of shale gas is 187.5 trillions $m^3$ so human can use it for 59 years and the amount will increase in the future. Several nations such as USA, Canada, China and Russia have more and more interested in shale gas as a futuristic major energy source. In accordance with this trend in the world, the amount of studying theses for development of shale gas have increased so their theses became important increasingly. The number of searched theses (1986 ~ The first half of 2013) is 3,468 and has increased recently. Among 89 nations studying shale gas, USA has 637 theses as No.1 in the world. 1,813 global studying institutes have studied shale gas; in the analysis result of several studying institutes, US geological survey institute was ranked as No.1 for the quality level of shale gas study and intensity of global cooperation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.64-71
• /
• 2020

This study evaluated the effects of the culture media and light sources on the growth of microalgae Haematococuus pluvialis. Limited ingredient medium, Modified Bold's Basic Medium (MBBM), commercial liquid fertilizer medium Neo, and seven different light sources with different wavelengths were used to incubate H. pluvialis for 39 days, and the growth rates were compared. As a result, the growth of H. pluvialis, a limited ingredient medium, produced the highest cell growth in the fluorescent light source while cell growth was the lowest in the blue+red LED. The growth of H. pluvialis in commercial medium Neo was highest in the fluorescent light source, and cell growth was lowest in the blue LED. In this study, the MBBM culture medium showed better results than the Neo culture medium. Microalgae grown in the fluorescent light source using the MBBM culture medium showed the best cell growth result in this study. The results were optimized for the culture medium, light source, and light quantity in H. pluvialis culture for the production of secondary metabolites and provide basic data for the mass culture of microalgae.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.298-302
• /
• 2008

This study was carried out to evaluate brazing characteristics of the braze joint between superhard alloy particles and carbon steel. Two types of insert metals that made by mechanical alloying process were selected for this study. One is composed of Cu, Zn and Ag(MIM-1) and the other one is composed of Cu, Zn, Ag and Cd.(MIM-2) The chemical compositions of these insert metals were similar to AWS BAg-20 and BAg-2a system. And the commercial insert metals(CIM-1, CIM-2) were also evaluated for the comparative study. The characterization of the insert metals were conducted by wettability tests, shear tensile test and microstructural analyses. The results indicated that wettability tests displayed that MIM-1 and CIM-1 insert metals had the larger wetting angle than MIM-2 and CIM-2 and the wetting angle of the MIM-1 showed higher value than that of CIM-1. However these values are less than $25^{\circ}$ that is recommended for standard value for usual insert metals. The highest value of shear tensile tests was obtained from the brazed joint that made by MIN-1 and the value was $2.29{\times}10^2MPa$. This value is appeared to be higher or same as the commercial insert metals. The microstructures of the inserts metals were composed of Cu-rich proeutectic structure for matrix and Ag-rich eutectic structure. The braze joint between superhard alloy particles and carbon steel produced by the MIM-1(Ag-Cu-Zn) system showed sound joint showing stable microstructures. However there was also some porosities at the interface.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.97-115
• /
• 2013

The world-wide principal criteria of aircraft operations is ICAO Annex 6. Operations of Aircraft. Among ICAO Annex 6, Part I is for International Commercial Air Transport - Aeroplanes and it assumes major part of civil aviation. ICAO has been providing Contracting States with SARPs(Standards and Recommended Practices) and monitor each State's reflection degree into their domestic air law, so-called USOAP(Universal Safety Oversight Audit Program). Current ICAO USOAP is Snap-shot method, but it will be changed to USOAP-CMA method from the year of 2013. ICAO USOAP results have overall effects on national aviation industry such as routes, insurance, airlines cooperation and so forth. Low grades of results attract international attention and that leads to flag carrier's operation stoppage, route restriction, airlines cooperation restriction, insurance increase directly or indirectly. Thus it is important to get excellent grades in ICAO USOAP and to maintain confidence. Our government ranked top to get 98.89 grades in 2008 ICAO USOAP but after 2008 the revised provisions have not been reflected sufficiently into our air law. So I would like to grip reflection ratio of ICAO Annex 6 Part I into our domestic air law by using the most updated revised edition on this paper. Together I would like to suggest alternatives for the non-reflected and partially reflected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.218-225
• /
• 2017

To investigate the anti-hangover effects of Cudrania tricuspidata root extract (CTE), the blood alcohol metabolism and blood gas imbalance of CTE in rats treated with 10 ml/kg alcohol were examined. CTE (500 mg/kg and 750 mg/kg) was administrated after 30 minutes of alcohol consumption (10 ml/kg). Blood collection was implemented from the tails of the animals after 1, 3, and 5 hours post alcohol consumption. The Condition drink (a commercial anti-hangover beverage) was used as a positive control. Single administration by the oral route was performed. The consumption of CTE (500 mg/kg and 750 mg/kg) decreased the serum alcohol concentration by increasing and maintaining both the alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) enzyme activity levels in the blood and liver. In addition, CTE led to recovery from the imbalances in the blood gas levels, including carbon dioxide ($CO_2$) and changes in pH, bicarbonate ($HCO_3{^-}$) and lactic acid levels due to alcohol ingestion. In conclusion, CTE exerted a more pronounced anti-hangover effect than a commercial anti-hangover drink. Therefore, CTE can be a novel and safe anti-hangover natural product agent for the prevention or treatment of symptoms caused by excessive alcohol consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.709-717
• /
• 2016

In this study, the convenience and efficiency of vision-based displacement measurement (VBDM) to estimate the cable tension of cable-stayed bridges and the requirements for its effective application were examined. To demonstrate its convenience and efficiency, it was confirmed that VBDM can be accomplished with a minimum amount of equipment using a commercial camcorder. In this case, it was found that the accuracy of estimation of the natural frequencies is sufficient, even though magnitude errors can occur when conducting high-speed recording at the low resolution afforded by the minimal equipment employed. It was also confirmed that the most important factor in detecting the precise natural frequencies is the use of the appropriate frequency range in the tension estimation using vibration. Based on these results, a study was carried out on the accuracy variation of the estimated tension according to the frame rate of a commercial camcorder. For this purpose, an experiment was performed to estimate the cable tension in a cable-stayed bridge model. Through this experiment, the detectable tensions of cables with various natural frequencies as a function of the frame rate were summarized. As a result, it was shown that the frame rate should be determined based on the natural frequency which is estimated to be located within the appropriate frequency range (approximately 10~75% of theoretical range) considering the aliasing and low-frequency distortion due to excitations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.685-693
• /
• 2017

This study aims to effectively respond to urban local rainstorms by classifying the risk against flood damage for each use district. The risk classification is based on sensitivity analysis of the socio-economic damage caused by local rainstorms in Changwon city, Korea by a Fuzzy model using data, such as the districts that provide institutional bases for land use, land prices, which estimate the property values, and floor area ratios, which measures the density and areas of flood damage. The analysis result indicated that flood damage in five districts of Changwon (Masan happo-gu, Masan Hoewon-gu, Sungsan-gu, Euichang-gu, and Jinhae-gu) is highest in the order of commercial areas, residential areas, industrial areas, and forests, which was attributed to high land price and floor area ratio of commercial areas. On the other hand, specific analysis in Masan Hoewon-gu and Sungsan-gu was different from the previous result, indicating that the risk against flood damage may vary according to the districts depending on their local conditions. The analysis from this study can be applied to future urban planning and be used as a guideline to estimate the potential flood damage. Overall, this study is meaningful in that it proposes an effective management of land use as a new resolution to mitigate of urban flood damage within a broader perspective of climate change and urbanization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.732-740
• /
• 2019

Evaporative humidification using a humidifying element is widely used for humidification of a building or a data center. The performance of a humidifying element is commonly expressed as humidification efficiency, which is used independent of air temperature, humidity and water temperature. In this study, a series of tests were conducted at two air conditions (data center and commercial building) using two different humidifying elements (cellulose/PET and Glasdek) changing the frontal air velocity and water temperature. Results showed that the measured humidification efficiency was dependent on the air condition and water temperature. In fact, even dehumidification occurred at the inlet of the humidifying element at the air condition of commercial building. The reason was due to the inlet water temperature, which was lower than the dew point air temperature. As the difference between the inlet water and the dew point air temperature increased, the humidification efficiency decreased. This suggest that proper thermal model should account for the inlet region, where the amount of moisture transfer may be different from the other part of the humidification element. A simple analysis on the thermal performance of the cellulose/PET humidification element showed that the Sherwood number was adequately predicted, whereas the friction factor was ovepredicted, probably due to the simplification of the channel geometry and the neglection of the water film on the element surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.326-331
• /
• 2018

Evaporative humidification using a humidifying element is used widely for the humidification of a building or a data center. The performance of a humidifying element is commonly expressed as the humidification efficiency, which is assumed to be independent of the air temperature or humidity. To verify this assumption, a series of tests were conducted under two air conditions - data center ($25^{\circ}C$ DBT, $15^{\circ}C$ WBT) and commercial building ($35^{\circ}C$ DBT, $21^{\circ}C$ WBT) - using humidifying elements made from cellulose/PET and changing the frontal air velocity from 1.0 m/s to 4.5 m/s. Three samples having a 100 mm, 200 mm, or 300 mm depth were tested. The results showed that the humidification efficiency is dependent on the air condition. Indeed, even dehumidification occurred at the inlet of the humidifying element at the air condition of commercial building. This suggests that a proper thermal model should account for the inlet area, where the amount of moisture transfer may be different from the other part of the humidification element. As the depth of the element increased from 100 mm to 200 mm, the humidification efficiency increased by 29%. With further increases to 300 mm, it increased by 42%. On the other hand, the pressure drop also increased by 47% and 86%.