• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.89-92
• /
• 2005

Using natural speech commands for controlling a human-robot is an interesting topic in the field of robotics. In this paper, our main focus is on the verification of a speaker who gives a command to decide whether he/she is an authorized person for commanding. Among possible dynamic features of natural speech, pitch period is one of the most important ones for characterizing speech signals and it differs usually from person to person. However, current techniques of pitch detection are still not to a desired level of accuracy and robustness. When the signal is noisy or there are multiple pitch streams, the performance of most techniques degrades. In this paper, we propose a two-level approach for pitch detection which in compare with standard pitch detection algorithms, not only increases accuracy, but also makes the performance more robust to noise. In the first level of the proposed approach we discriminate voiced from unvoiced signals based on a neural classifier that utilizes cepstrum sequences of speech as an input feature set. Voiced signals are then further processed in the second level using a modified standard AMDF-based pitch detection algorithm to determine their pitch periods precisely. The experimental results show that the accuracy of the proposed system is better than those of conventional pitch detection algorithms for speech signals in clean and noisy environments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.23-30
• /
• 2016

Wake effects cause wind turbine generators (WTGs) within a wind power plant (WPP) to produce different levels of active power and subsequent reactive power capabilities. Further, the impedance between a WTG and the point of interconnection (POI)-which depends on the distance between them-impacts the WPP's reactive power injection capability at the POI. This paper proposes a voltage control scheme for a WPP based on the available reactive current of the doubly-fed induction generators (DFIGs) and its impacts on the POI to improve the reactive power injection capability of the WPP. In this paper, a design strategy for modifying the gain of DFIG controller is suggested and the comprehensive properties of these control gains are investigated. In the proposed scheme, the WPP controller, which operates in a voltage control mode, sends the command signal to the DFIGs based on the voltage difference at the POI. The DFIG controllers, which operate in a voltage control mode, employ a proportional controller with a limiter. The gain of the proportional controller is adjusted depending on the available reactive current of the DFIG and the series impedance between the DFIG and the POI. The performance of the proposed scheme is validated for various disturbances such as a reactive load connection and grid fault using an EMTP-RV simulator. Simulation results demonstrate that the proposed scheme promptly recovers the POI voltage by injecting more reactive power after a disturbance than the conventional scheme.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.325-330
• /
• 2012

A single-phase PVPCS(photovoltaic power conditioning system) that contains a single phase dc-ac inverter tends to draw an ac ripple current at twice the out frequency. Such a ripple current may shorten passive elements life span and worsen output current THD. As a result, it may reduce the efficiency of the whole PVPCS system. In this paper, the ripple current propagation is analyzed, and two methods to reduce the ripple current are proposed. Firslyt, this paper presents notch filter with IP voltage controller to reject specific current ripple in single-phase PVPCS. The notch filter can be designed that suppress just only specific frequency component and no phase delay. The proposed notch filter can suppress output command signal in the ripple bandwidth for reducing output current THD. Secondly, for reducing specific current ripple, the other method is feed-forward compensation to incorporate a current control loop in the dc-dc converter. The proposed notch filter and feed-forward compensation method have been verified with computer simulation and simulation results obtained demonstrate the validity of the proposed control scheme.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.103-112
• /
• 1999

In this paper, a speaker-independent isolated world recognition system for a car navigation system is implemented using a general digital signal processor. This paper presents a method combining SNR normalization with RAS as a noise processing method. The semi-continuous hidden markov model is adopted and TMS320C31 is used in implementing the real-time system. Recognition word set is composed of 69 command words for a car navigation system. Experimental results showed that the recognition performance has a maximum of 93.62% in case of a combination of SNR normalization and spectral subtraction, and the performance improvement rate of the system is 3.69%, Presented noise processing method showed good speech recognition performance in 5dB SNR in car environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.409-416
• /
• 2017

In order that multiple wideband RF transmitters which have mission to deliver essential information to aircraft operate at the same time, RF transmitter has a variable sub-carrier frequency to modulate the signal. In case of exposure to weak environment, Wide-band RF transmitter is designed to check component of transmitter that includes antenna BIT to increase system reliability. Normally, Antenna BIT measure the reflection RF power of antenna to check system condition. However, Antenna BIT has a difference that depends on testing frequency to use the long RF cable which is located between the power amp and the antenna. The periodic phenomenon of the reflected antenna power are theoretically explained about dependence on the RF cable length. Based on presented result, suggested measurement methods is effectively able to be applied to diagnosis system condition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• KIISE Transactions on Computing Practices
• /
• v.21 no.8
• /
• pp.531-536
• /
• 2015

The speech recognition is an active research area in the human computer interface (HCI). The objective of this study is to control digital devices with voices. In addition, the mouse is used as a computer peripheral tool which is widely used and provided in graphical user interface (GUI) computing environments. In this paper, we propose a method of controlling the mouse with the real-time speech recognition function of a smartphone. The processing steps include extracting the core voice signal after receiving a proper length voice input with real time, to perform the quantization by using the learned code book after feature extracting with mel frequency cepstral coefficient (MFCC), and to finally recognize the corresponding vowel using hidden markov model (HMM). In addition a virtual mouse is operated by mapping each vowel to the mouse command. Finally, we show the various mouse operations on the desktop PC display with the implemented smartphone application.

• Advances in aircraft and spacecraft science
• /
• v.4 no.2
• /
• pp.145-167
• /
• 2017

The presented paper gives an overview of several projects addressing the experimental characterization and control of the buffet phenomenon on 3D turbulent wings in transonic flow conditions. This aerodynamic instability induces strong wall pressure fluctuations and therefore limits flight domain. Consequently, to enlarge the latter but also to provide more flexibility during the design phase, it is interesting to try to delay the buffet onset. This paper summarizes the main investigations leading to the achievement of open and closed-loop buffet control and its experimental demonstration. Several wind tunnel tests campaigns, performed on a 3D half wing/fuselage body, enabled to characterize the buffet aerodynamic instability and to study the efficiency of innovative fluidic control devices designed and manufactured by ONERA. The analysis of the open-loop databases demonstrated the effects on the usual buffet characteristics, especially on the shock location and the separation areas on the wing suction side. Using these results, a closed-loop control methodology based on a quasi-steady approach was defined and several architectures were tested for various parameters such as the input signal, the objective function, the tuning of the feedback gain. All closed-loop methods were implemented on a dSPACE device able to estimate in real time the fluidic actuators command calculated mainly from the unsteady pressure sensors data. The efficiency of delaying the buffet onset or limiting its effects was demonstrated using the quasi-steady closed-loop approach and tested in both research and industrial wind tunnel environments.

• Journal of Convergence for Information Technology
• /
• v.9 no.4
• /
• pp.14-20
• /
• 2019

The purpose of this paper is to present a smart QR code recording system and a method of non­storage data delivery that transforms the original data into a form of URL information by encrypting it and encoding the URL information into a QR code so that the QR code can be written and decrypted in a medium without storing the original data. The method of the study was presented by the prior art study and the literature research. Analysis results show that the system is built on the online administration server. The data input signal matching secret code is stored in DB, the QR code generation command converts input data from the password DB to the password information combined into the subordinate locator of the admin server's domain name, URL code. Therefore, the smart QR method of data management (recording and providing) indicates that there are no limitations in the ease and space of use or obstacles to capacity use.