• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.43-48
• /
• 2016

본 연구에서는 입자상 물질의 유해성을 포함하는 연소생성물 독성평가 기법의 개발을 위한 선행 연구로써, 입자상 물질의 위험성을 확인하기 위한 실험을 수행하였다. 실험은 동일 시료의 가스유해성 시험을 통하여 교반상자와 피검상자 사이 Membrane 필터 설치 유무에 따른 평균행동정지시간의 변화를 분석함으로써, 연소생성물 중 입자상 물질을 필터링하여 노출시킨 경우와 입자상 물질을 포함한 연소생성물을 노출시킨 경우의 시험 결과를 비교 분석하였다. 시험결과 필터 장착 시 실험용 쥐의 평균행동 정지시간이 목재 시료의 경우 최대 264% 증가하였으며, 우레탄 시료의 경우 최대 179% 증가함을 확인하였다. 이를 통해 입자상 물질의 유해성 및 이에 대한 정량적 독성평가의 필요성을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.104-107
• /
• 2017

9톤급 다단연소 사이클 엔진 개발을 위한 기술검증시제(TDM0) 파워팩 연소시험이 나로우주센터 3단 엔진 시험설비에서 수행되었다. 기술검증시제 파워팩 모델은 주연소기를 제외한 예연소기와 터보펌프, 추진제 공급시스템으로 구성되어 있다. 파워팩 연소시험에서는 파워팩 구성품들간의 연계 작동성을 확인하였으며, 엔진 시스템 시험을 위한 파워팩의 주요 성능 변수들을 평가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3276-3281
• /
• 2007

A novel oxy-fuel burner for a boiler has been devised and composed into a 50 kW class boiler system. A series of test has been conducted to show the characteristics of combustion, exhaust gas and the boiler. Numerical simulations have been also performed and validated against the experimental data to discuss detailed physics. The oxy-fuel burner can effectively heat the combustion chamber with the significantly reduced combustion gas, which enables to realize the compactness of the system. The composition of exhaust gas reveals that the sealing of the system is crucial to achieve high $CO_2$ concentration and low $NO_X$ emission.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.499-502
• /
• 2003

Increase energy costs have placed demands for improved combustion efficiency, high equipment availability, low maintenance and safe operation. Simultaneously low NOx modification, installed due to stricter environmental legislation, require very careful combustion management. We aimed at gaining the relationship between burner flame image and emissions such as NOx and unburned carbon in furnace by utilizing the image processing method. For the first step of development, its possibility test was undertaken with bench furnace. The test proceeded to the second step with pilot furnace, the system was observed to be effective for evaluating the combustion conditions. By using this technology, it is possible to perform continuous monitoring of the combustion conditions and instant detection of individual changes for each burner to prevent future loss of ignition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제16회 학술발표회 논문초록집
• /
• pp.35-38
• /
• 2001

차세대 추진 기관으로 연구되고 있는 스크램제트 엔진의 열역학적 특성들을 검토하였다. 유동이 엔진을 통과하면서 연소에 의해 전압력이 손실되고 노즐 출구 마하수가 감소하지만, 고온 연소 가스가 배출되기 때문에 실질적인 속도는 증가하게 되고 추력이 발생한다. 초음속 연소를 모사하기 위해 blowdown 형태의 초음속 연소 풍동 설계를 위한 개념 설계가 이루어졌다. 초음속 풍동 시험부에서 마하 2.5의 속도를 유지하기 위한 작동 압력과 질유량이 계산되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.262-265
• /
• 2003

본 연구는 건국대학교 연소추진 실험실 주관으로 하이브리드 로켓 모터 실험 장치를 구성하고 산화제의 mass flux에 따른 연소율 변화 둥을 측정하여 연소 불안정성에 대해 연구하는 것을 목표로 하고 있다. Test fire를 해본 결과, 실험이 순서대로 원활히 진행되어 연소에 성공하였으며, PC를 이용하여 압력, 추력, 온도 데이터를 받아낼 수 있음을 확인하였다. 진행될 사항은 실험을 통하여 연소율의 비정상적 변화와 연소실 내부의 압력변화특성을 연구하고, 온도를 측정함으로써 C＊(특성속도)를 계산하여 하이브리드 모터의 연소 특성이 연구되어야 할 것이다.

• 한국연소학회지
• /
• 제8권3호
• /
• pp.31-37
• /
• 2003

The objective of this work is to investigate the effect of swirl, injection pressure and pilot injection on D.I.Diesel combustion by using a transparent engine system. The test engine is equipped with common rail injection system to obtain high pressure and to control injection timing and duration. In this study, the combustion analysis and steady flow test were conducted to estimate the heat release rate from in-cylinder pressure and pilot injection was investigated by using LII technique. As the results, high injection pressure was found to shorten ignition delay as well as enhance peak pressure and heat release rate was greatly affected by injection timing and pilot injection. In addition, the results showed that the period of soot formation corresponded to the diffusion flame.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.560-564
• /
• 2004

The optimal design and combustion analysis of the gas generator for Liquid Rocket Engine (LRE) were performed. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton$_{f}$ in thrust with RP-1/Lox propellant. The optimal design was done for maximizing specific impulse of main combustion chamber with constraints of combustion temperature and power matching required by turbopump system. Design variables were selected as total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design show the dimension of length, diameter, and contraction ratio of gas generator. Also, the combustion test was conducted to evaluate the performance of injector and combustion chamber. And the effect of the turbulence ring was investigated on the mixing enhancement in the chamber.r.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.93-97
• /
• 2015

The combustion tests for Korean anthracite-bituminous coal blend were carried out in the 200 MW utility boiler. The burning characteristics of the blend were studied with a thermogravimetric analyzer (TGA). From the observation of TGA burning profiles, it was found that the presence of bituminous coal in the blend appeared to enhance the reactivity of anthracite in the higher temperature region, indicating certain interactions between the two coals. The plant test showed the boiler operation was reasonably stable with somewhat poor combustion efficiency, and some modification of the combustion environment in the furnace is necessitate for the further stable plant operation.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.22-34
• /
• 1997

Circumstances require improving diesel engine, and many studies have been done in constant volume chamber(CVC). Because the combustion mechanism of a diesel engine has many difficulties with non-homogeneous nature, there has been a limitation to analyzing the combustion mechanism with CVC. Studies are often given in a real engine, but also it has difficulties in modifying configuration of combustion chamber etc. To get more easy way for mote engine-like test, a rapid compression mechanism has been introduced. This study addresses to designing a rapid compression expansion machine(RCEM) driven by compressed air, and to applying it on IDI diesel combustion chamber which has a glow plug. RCEM is introduced first and its characteristics are tested, then spray/combustion characteristics of diesel spray impinging on a glow plug in RCEM combustion chamber are investigated. The results show active combustion in the system employing spray impinging on a glow plug so as to improve combustion efficiency.