• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.34-38
• /
• 2002

In this paper, efficiency estimation of toxicity fee fire resistance cable experiments was measured smoke density of toxicity free fire resistance polyolefin insulation material and electric field dependence of tree shape in low density polyethylene (LDPE). One of the most serious causes of failure in high-voltage cables, can be an electrical discharge across an internal gab or void in the insulating material. Treeing due to partial discharge is one of the main causes of breakdown in the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation and research of the fire resistance character has become important. First, we have studied on electric field dependence of tree shape in LDPE about treeing phenomena occurring on the high electrical field. Second, the measurement method is the attenuation quantity of irradiation by smoke accumulating with in a closed chamber due to non-flaming heat decomposition and flaming combustion. A main cause of fire-growth and generating toxic gas when, it bums, should be dealt with great care in life. safety design. The fire gases were occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC, which has high content of carbon in chemical compound.

• 한국대기환경학회지
• /
• 제3권2호
• /
• pp.18-26
• /
• 1987

In order to investigate the character of air pollution by heavy metals and to elucidate the possible sources in Seoul city, this study was performed to measure the concentrations of heavy metals of total suspended particulate and air pollutants such as $SO_2, NO_2, CO, CH_4$, Non-methane hydrocarbon, ozone at the residential-traffic area (shinchon dong) in January and February, 1986. The results are as follows: 1. $SO_2$ and TSP concentration were 135ppb and 167 $\mug/m^3$ in average, respectively. 2. While concentrations of heavy metals such as Fe, Cu, Pb in the ambient air seems gradually decreasing annually, Ni compound has been shown the tendency of increasing. 3. Among heavy metals in TSP analysed, the iron was detected at the highest level, 0.905% and the cadimium was the lowest 0.004% in average, respectively. 4. V, Fe and Zn compounds in air were observed to be highly correlated with their correlation coefficients(r) higher than 0.7. Pb compound was highly correlated to the levels of Zn and Fe, however relatively less correlated to V compound. 5. Among concentrations of heavy metals in the particulates, V and Ni compounds were highly correlated with coefficient(r) of 0.8587; the cause might be imagined by the fact of releasing from combustion of fuel oil. Fe, Pb and Zn compounds were highly correlated $SO_2$ concentration. It might be explained that they were released by combustion of coal. 6. The level of $SO_2$ was highly correlated to most of heavy metals: especially correlation coefficient(r) to Pb compound was 0.9081. Pb compound was also highly correlated to NO, CO and TSP. TSP showed higher correlation to Pb and Cd compounds than to V and Ni compounds. It might be assumed that particulate was mainly produced by combusting coal from space heating and by exhausting gasoline and diesel oil from transportation rather than by burning fuel oil.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.165-173
• /
• 2014

This study is about determination of fire origin by using analysis of shadow that was recorded CCTV data at the fire scene. This analysis is based on straight and radiate nature of light. At fire experiment with about 1m flame, we conformed that 2-dimensional extension line is focused at the bottom of the fire. If the fire is burning at the same level with shadow, it indicate the point of origin exactly. In 3-dimensional analysis that connect extensional line between distinctive points the shadow and the objet, the line focused in the ${\emptyset}$ 50cm-circle. We estimate the reason of that is because of the character of combustion of gases. The line indicate not the point of origin but the flame that is over the point of origin. thus, you have to consider the line indicate the flame when you do 3-dimensional analysis.

• 대한화학회지
• /
• 제14권4호
• /
• pp.327-332
• /
• 1970

A simple and convenient device for deflection-type direct reading the variations in electrolytic conductance is described and applied to the analysis of sulfur by combustion-$H_2O_2$ oxidation method. The apparatus consisted of a high resistance-ratio bridge in which the other adjacent arms are the differential cells. By adopting unusually high a-c voltage source for the bridge excitation, the a-c method for unbalanced bridge is established, decreased sensitivity owing to reduced bridge factor, 0.01, is overcome and also the absolute sensitivity and linearity are greatly improved. Over 50% variations in impedance of the balanced cell, within 1% deviation from the linearity can be attained with a volt (rms)order of output which was detected directly with VTVM without further amplification. Analysis of the bridge shows that these useful features are natural result of the constant current character of the high source impedance generator and the performance of the device agreed with the theoretical predictions. A standard procedure for the rapid analysis of sulfur using the bridge is also given, the analytical accuracy was approximately 1%. A determination takes not more than 5 minutes.

• 해양환경안전학회지
• /
• 제24권2호
• /
• pp.275-281
• /
• 2018

선박용 연료유가 연소하는 과정에서 배출되는 오염물질은 대기오염을 유발하고 인체에 유해한 영향을 미치는 것으로 알려져 있다. 그에 따라, IMO에서는 선박에서 배출되는 오염물질을 규제하고 있다. 하지만 입자상물질(Particulate matter: PM)에 대한 규제는 아직 논의단계에 있으므로 선제적인 대응이 필요하다. 그러기 위해서는 입자상물질에 대한 기초적인 연구가 필수적이다. 이번 연구에서는 해상용 연료유에서 발생하는 입자상물질의 기초 데이터 구축을 위해 선박 디젤 엔진에 사용되는 연료유의 무차원 광소멸계수($K_e$)를 계측하여 분석하였다. 특성 비교를 위해 육상 디젤 엔진에 사용되는 연료유를 같은 방법으로 측정하였다. 두 연료유는 황함유량과 밀도에서 차이가 난다. 무차원 광소멸계수($K_e$)는 633 nm의 레이저를 이용하여 광학적인 방법으로 측정하고 중력식 필터법에 의해 채집된 입자상물질의 체적분율을 이용하여 결정하였다. 선박용 연료유에서 배출되는 입자상물질의 무차원 광소멸계수($K_e$)는 8.28이고, 육상용 연료유는 8.44이다. 두 연료유의 무차원 광소멸계수($K_e$)는 측정 불확도 범위내에서 거의 유사하였다. 하지만 Rayleigh limit 해법에서 구한 값과의 비교를 통해 광산란 비중이 클 수 있는 부분과 광투과율과 채집질량과의 관계를 통해 광소멸 특성이 상이할 수 있음을 확인하였다.