• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.2-8
• /
• 2006

Numerical analysis of the flow field in the reactive medium of End-Burring combustor is studied in order to investigate the combustion characteristics of hybrid combustion. The main part of this study is focused on the port diameter effects of oxidizer injector on the temperature distribution within the reactive field. It is found that the case having the largest port diameter(25 mm) delivers the optimum conditions for the design of End-Burring combustor where the predicted temperature field showed the most acceptable distribution.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.92-95
• /
• 2011

케로신-산소 동축 로켓 분사기의 난류 연소를 수치적으로 연구하였다. 이 연구를 위하여 다단 준 총괄 반응 기구를 개발하였다. 이 반응 기구는 가상의 케로신 연료가 수소와 일산화 탄소로 분해된 이후 고온 영역의 상세 산화 반응들로 구성되어 있다. 난류 연소의 LES 해석을 위하여 5차의 WENO 기법을 이용하였다. 반응 및 비 반응 유동의 난류 특성을 살펴 보았으며 리세스의 존재가 난류의 생성과 연소에 미치는 영향을 살펴보는 심화 연구를 수행하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.77-78
• /
• 2011

케로신/산소의 연소 해석을 위하여 연소 해리 성분을 고려한 다단 준총괄 반응을 개발하였다. 총괄 반응 상수는 실험 데이터에 잘 부합하도록 결정하였다. 개발된 다단 총괄 반응을 이용하여 케로신/산소 축대칭 전단 동축 분사기의 연소 유동에 대한 수치 해석을 수행하였다. 고해상도 기법을 이용한 해석을 통하여 리세스가 유동 불안정성의 증가시켜 연료 공기 혼합 및 연소 효율을 증대에 기여하는 정성적 특징을 확인하였다.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.95-104
• /
• 2003

The objective of this work is to investigate the turbulent reacting flow in a three dimensional combustor with emphasis on thermal NO emission through a numerical simulation. Flow field is analyzed using the SIMPLE method which is known as stable as well as accurate in the combustion modeling, and the finite volume method is adopted in solving the radiative transfer equation. In this work, the thermal characteristics and NO emission in a three dimensional combustor by changing parameters such as equivalence ratio and inlet swirl angle have investigated. As the equivalence ratio increases, which means that more fuel is supplied due to a larger inlet fuel velocity, the flame temperature increases and the location of maximum temperature and thermal NO has moved towards downstream. In the mean while, the existence of inlet swirl velocity makes the fuel and combustion air more completely mixed and burnt in short distance. Therefore, the locations of the maximum reaction rate, temperature and thermal NO were shifted to forward direction compared with the case of no swirl.

• 한국분무공학회지
• /
• 제3권2호
• /
• pp.42-50
• /
• 1998

The effect of swirl flows un the fuel spray characteristics were investigated for various swillers in a model combustor. The interaction between the flow field and fuel spray in the main combustion tone made by frontal devices including fuel injection nozzles and swirlers. which were characterized by flow velocities, fuel droplet sizes and their distributions which were measured by APV(Adaptive Phase/Doppler Velocimetry) under atmospheric condition at 320cc/min kerosine fuel flow and 0.04kg/sec air supply. A dual swirler with circumferential two-stage swirl vanes of $40^{\circ}\;and\;45^{\circ}$ vanes in different directions and two single-stage swillers of $40^{\circ}$ vanes with 12 and 16 vanes were tested. It was found that the dual swirler has the largest recirculating zone with highest reverse flow velocity. The strongest swirl flow was found at the boundary of recirculation zone. Small fuel droplets were observed in the main axial stream and inside the recirculation zone when swirling flow field were generated by the frontal devices. These findings could give the tips on the optimal design of frontal devices to realize low emissions in gas turbine combustion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.803-810
• /
• 2017

초임계 조건에서의 연소반응에서는 액체산소가 초임계 상태로 천이되며 스도보일링과 급격한 물성치변화를 발생시킨다. 이때 초임계 상태에서 작동하는 분사기의 연소반응은 급격한 밀도차로 인한 난류확산에 의해 지배되며, 따라서 스도보일링과 함께 발생하는 확산유동에 대한 연구가 필요하다. 많은 연구자들에 의해 초임계 연소해석에서 발생하는 이 현상들에 대한 연구가 진행되었지만 다양한 변수들에 의한 사례연구가 부족한 상태이다. 본 연구에서는 초임계 압력조건에서 산화제-연료비(O/F)와 연소기 직경, 리세스비를 통해 재순환유동 및 액체산소코어 길이에 변화를 주어 이로 인한 유동구조 및 화염구조의 변화를 수치적으로 연구하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.63-71
• /
• 2001

The objective of this work is to elucidate the details of two key factors dominating the droplet buring behavior in sprays : droplet-droplet interaction and convective flow. The combustion of a one-dimensional linear droplet array with a convective flow has been studied. A one-step, second order model was employed to simulate the chemical reaction in the combustion process. Results for droplet arrays burning at two Reynolds numbers, 50 and 100, two horizontal droplet spacings, 5 and 11 radii, and two vertical droplet spacing, 2 and 4 radii, were obtained. The results indicate the droplet burning behavior is affected by Reynolds number, droplet-droplet spacing, and the relative location of droplets in the array. Droplet-droplet interaction was found to be strong for arrays with smaller droplet spacing.

• 한국연소학회지
• /
• 제8권4호
• /
• pp.15-23
• /
• 2003

The zone conditional two-fluid equations are derived and validated against DNS database of a premixed turbulent flame. The conditional statistics of major flow variables are investigated to understand the mechanism of flame generated turbulence. The flow field in burned zone shows substantially increased turbulent kinetic energy, which is highly anisotropic due to reaction kinematics across thin f1amelets. The transverse component may be larger than the axial component for a distributed pdf of the flamelet orientation angle, while the opposite occurs due to redistribution of turbulent kinetic energy and flamelet orientation normal to the flow at the end of a flame brush. The major source or sink terms of turbulent kinetic energy are the interfacial transfer by the mean reaction rate and the work terms by fluctuating pressure and velocity on a flame surface. Ad hoc modeling of some interfacial terms may be required for further application of the two-fluid model in turbulent combustion simulations.

• 대한기계학회논문집B
• /
• 제33권5호
• /
• pp.343-348
• /
• 2009

The present study has experimentally investigated the effects of $CO_2$ diluted oxygen on the structure of swirl-stabilized flame in a lab-scale combustor. The methane fuel and oxidant mixture gas ($CO_2$ and $O_2$) were mixed in a pre-mixer and introduced to the combustor through different degrees of swirl vanes. The flame characteristics were examined for various amount of carbon dioxide addition to the methane fuel and various swirl strengths. The effects of carbon dioxide addition and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using chemiluminescence techniques to provide information about flow field. The results show that the hot combustion zone increases at the upstream reaction zone because of an increase in the recirculation flow for an increase in swirl intensity. The hot combustion zone is also increased at the downstream zone by recirculation flow because of an increase in swirl intensity which results in higher centrifugal force. The OH and CH radical intensities of reaction zone decrease with carbon dioxide addition because the carbon dioxide plays a role of diluted gas in the reaction zone.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.1-8
• /
• 2016

초음파 진동자에 의해 미립화된 탄화수소계 액체연료를 연소시키는 버너의 연소장을 가시화시키기 위한 실험이 수행되었다. 초고속카메라와 열화상 카메라를 이용하여 화염형상 및 연소장 이미지를 획득하였으며, 후처리를 통해 화염과 연소장의 구조 및 거동을 면밀히 분석하였다. 수송기체 유량이 증가하면 연소반응이 촉진되어 연소영역이 신장되고, 반응온도가 증가하였다. 또한, 시간에 따른 가시화염과 IR 연소장의 거동변화를 비교분석하여 화염의 진동특성을 고찰하였다.