• Journal of Medicine and Life Science
• /
• v.17 no.3
• /
• pp.103-106
• /
• 2020

Bone marrow failure, such as aplastic or myelophthisic anemia, can occur due to an underlying lymphoid malignancy and cause life-threatening events. A 58-year-old man diagnosed with angioimmunoblastic T-cell lymphoma had recently visited the emergency department because of an altered level of consciousness caused by acute severe anemia. The laboratory findings were strongly suggestive of bone marrow failure syndrome. Bone marrow examination was immediately performed and, subsequently, dexamethasone was initiated to control the underlying lymphoma. Intravenous immunoglobulin was also administered in combination due to combined immune hemolytic anemia and thrombocytopenia. Bone marrow examination revealed a packed marrow with marked fibrosis and lymphoma involvement. A diagnosis of secondary myelofibrosis related to the underlying lymphoma was made, and sequential combination chemotherapy was introduced despite the presence of severe anemia and thrombocytopenia. After combination chemotherapy, his hematologic profile and underlying lymphoma improved. Better understanding of various hematologic manifestations and knowledge of the rare condition of lymphoma are essential for appropriate diagnostic approaches and treatment.

• Journal of Ginseng Research
• /
• v.46 no.1
• /
• pp.1-10
• /
• 2022

Ginseng has been well-known as a medicinal plant for thousands of years. Bacterial endophytes ubiquitously colonize the inside tissues of ginseng without any disease symptoms. The identification of bacterial endophytes is conducted through either the internal transcribed spacer region combined with ribosomal sequences or metagenomics. Bacterial endophyte communities differ in their diversity and composition profile, depending on the geographical location, cultivation condition, and tissue, age, and species of ginseng. Bacterial endophytes have a significant effect on the growth of ginseng through indole-3-acetic acid (IAA) and siderophore production, phosphate solubilization, and nitrogen fixation. Moreover, bacterial endophytes can protect ginseng by acting as biocontrol agents. Interestingly, bacterial endophytes isolated from Panax species have the potential to produce ginsenosides and bioactive metabolites, which can be used in the production of food and medicine. The ability of bacterial endophytes to transform major ginsenosides into minor ginsenosides using β-glucosidase is gaining increasing attention as a promising biotechnology. Recently, metabolic engineering has accelerated the possibilities for potential applications of bacterial endophytes in producing beneficial secondary metabolites.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.39-40
• /
• 2022

This study is intended to examine the curing effect of the combination of the bubble sheet on the concrete by analyzing the temperature profile and core strength of the simulated concrete structure. The test results relvealed that the average temperature of the concrete applying photothermal sheet overlapped with the double bubble sheet at the bottom was 23.5℃, which had the highest insulation and insulation effect compared to other types of surface insulation curing sheets, and the core strength increased by up to 56%.

• Biomedical Science Letters
• /
• v.30 no.1
• /
• pp.32-35
• /
• 2024

In vitro antimicrobial activities of hot water extracts of Chamaecyparis obtuse, for methicillin-resistant Staphylococcus aureus (MRSA) was compared to commonly used conventional antimicrobial agents. All MRSA was susceptible to linezolid or vancomycin, but also to erythromycin. MIC range and MIC₉₀ to erythromycin, clindamycin, levofloxacin, tetracycline for MRSA were each 4 ㎍/mL, 2 ~ >128 ㎍/mL, ≤0.06 ~ >128 ㎍/mL, 0.25 ~ >128 ㎍/mL, 0.25~64 ㎍/mL and 4 ㎍/mL, .128 ㎍/mL, >128 ㎍/mL, >128 ㎍/mL, 64 ㎍/mL. The hot water extracts of leaf of C. obtuse had the lowest MIC range, MIC₅₀, and MIC₉₀ (0.125 µL/mL) for the MRSA tested, and it was possible more potent than various conventional antimicrobial agents. Screen antibacterial drug candidate with high antibacterial activity such as derivatives of C. obtuse leaf extract such as terpinen-4-ol or using combined therapy with commercialized antibacterial agents will likely be helpful in treating refractory MRSA infections.

• Korean Journal of Animal Reproduction
• /
• v.16 no.4
• /
• pp.289-299
• /
• 1993

The polypeptide patterns of cellular and follicular components were analysed by SDS-PAGE and two dimensional(2-D)electrophoresis combined with isoelectric focusing (IEF) to establish protein profiles in each of the components in porcine follicles. Oocyte-cumulus complexes were cultured in M16+FCS+Gn at 39 in an atmosphere of 5% CO$_2$, in air for 35 h. At the end of the culture, the zona-free oocyte, ZP alone and cumulus cells were prepared and analysed either on 10% SDS-PAGE for the protein profile at the first dimensional gel or 2-D protein pattern. The amounts of each samples were determined for the visualization with Coomasie brilliant blue (CBB) or silver staining, thus giving useful information for the identification of specific proteins in the components or appropriate amount of samples for proper visualization. Oocyte showed 25 and 114 kd major protein band. Other minor components were additionally visualized with CBB on the same gel after silver staining procedure. Cumulus cells also showed specific proteins which is not present in the oocytes. The number of cumulus cell was proper to give major bands with CBB and additional minor bands with silver staining. To establish the degree of contamination from the remnant of the corona radiata to the ZP, zonae were differently prepared or analysed by SDS-PAGE.The preparation of the ZP in this study did not showed any contamination judged by the protein profile of the components. Also follicular fluid showed its specific protein profile without any significant differences among the different sizes of follicles. The established protein profile of each follicular component should be helpful for the identification and elimination of contaminated components, i. e., antigen preparation or immunological studies. The results also suggest that the preparation of each components in the study was appropriate and can be used for a further sensitive biochemical analysis in mammalian oocytes and early embryos.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.109-115
• /
• 2006

Understanding characteristics of claypan soils has long been an issue for researchers and farmers because the high-clay subsoil has a pronounced effect on grain crop productivity. The claypan restricts water infiltration and storage within the crop root zone, but these effects are not uniform within fields. Conventional techniques of identifying claypan soil characteristics require manual probing and analysis which can be quite expensive; an expense most farmers are unwilling to pay. On the other hand, farmers would be very interested if this information could be obtained with easy-to-use field sensors. Two examples of sensors that show promise for helping in claypan soil characterization are soil profile strength sensing and bulk soil apparent electrical conductivity (ECa). Little has been reported on claypan soils relating the combined information from these two sensors with grain crop yield. The objective of this research was to identify the relationships of sensed profile soil strength and soil EC with nine years of crop yield (maize and soybean) from a claypan soil field in central Missouri. A multiple-probe (five probes on 19-cm spacing) cone penetrometer was used to measure soil strength and an electromagnetic induction sensor was used to measure soil EC at 55 grid site locations within a 4-ha research field. Crop yields were obtained using a combine equipped with a yield monitoring system. Soil strength at the 15 to 45 cm soil depth were significantly correlated to crop yield and ECa. Estimated crop yields from apparent electrical conductivity and soil strength were validated with an independent data set. Using measurements from these two sensors, standard error rates for estimating yield ranged from 9 to 16%. In conclusion, these results showed that the sensed profile soil strength and soil EC could be used as a measure of the soil productivity for grain crop production.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.398-406
• /
• 2012

This study aimed to examine whether the polygenic profile of ACE ID and ACTN3 R577X polymorphisms is associated with muscle power performance in Korean athletes. For this study, 106 top-class power athletes (top-class group), 158 elite power athletes (elite-class group), and 676 healthy adults (control) aged 18-39 yrs were recruited and their genotypes were analyzed. The top-class group showed higher frequencies of the II genotype and I allele in ACE, as well as higher frequencies of the RR genotype and R allele in ACTN3 (top-class vs. control: 41.4% vs. 32.1% for II genotype, 67.1% vs. 57.7% for I allele, p<0.05; 42.3% vs. 29.0% for RR genotype, 65.3% vs. 54.8% for I allele, p<0.05). In the polygenic profile, the top-class group had significantly higher frequencies of combined-II/ID+RR/RX genotype than the control group (top-class vs. control: 82.9% vs. 66.7% for II/ID+RR/RX, p<0.05), and there was even a sharp increase in total genotype score (TGS) in this group compared to the elite-class and control groups ($66{\pm}0.9$ vs. $58{\pm}1.9$ vs. $56{\pm}2.3$, p<0.05). The combined-II/ID+RR/RX genotype showed the possibility of succussion in the top-class muscle power performance with an odds ratio of 2.3 (CI:1.4-4.1, p<0.05). These results suggested that ACE and ACTN3 need to interact with each other to affect muscle-power performance in an additive form. Furthermore, the polygenic profile of ACE and ACTN3 can predict muscle performance with high success in a homogeneous dominant combined genotype (II/ID+RR/RX). A further study could identify and combine other genes into ACE and ACTN3 for muscle strength.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.150-156
• /
• 2008

An applied technique of contrast enhancement for X-ray image is proposed which is based on combined enhancement of scaling and wavelet coefficients in discrete wavelet transform space. Conventional contrast enhancement methods such as contrast limited adaptive histogram equalization (CLAHE), multi-scale image contrast amplification (MUSICA) and gamma correction were applied on scaling coefficients to enhance the contrast of an original. In order to enhance the detail as well as reduce the blurring caused by up scaling of contrast modified scale coefficients from lower resolution, the sigmoid manipulation function was used to manipulate wavelet coefficients. The contrast detail mammography (CDMAM) phantom was imaged and processed to measure the image line profile of results and contrast to noise ratio (CNR) comparatively. The proposed technique produced better results than direct application of various contrast enhancement methods on image itself. The proposed method can enhance contrast, and also suppress the amplification of noise components in a single process. It could be useful for various applications in medical, industrial and graphical images where contrast and detail are of importance.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.100-107
• /
• 2007

A internal lobe pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular, the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobes with circular shape, while the inner rotor profile is determined as conjugate to the other. The topic of this paper is the design of a new rotor, which is based on specific performance as different types depending on the shape of the lobe of the outer rotor. First, the design of internal lobe pumps with circular, elliptical, and their combined lobe profiles is considered. The latter is a new type of lobe profile with special shape whose curvature follows a definite function. Then we introduce the performance indexes used for the comparison. Some of these indexes, such as flow rate and flow rate irregularity, are commonly used for the comparison, while specific slipping is particularly suitable in this case. It is possible to notice that the circular and elliptical type is comparable to the circular one or the elliptical one in terms of flow rate irregularity, but has improved performance in terms of specific slipping. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field.

• Archives of Craniofacial Surgery
• /
• v.17 no.1
• /
• pp.20-24
• /
• 2016

Background: Midface concavity is a relatively common facial feature in East Asian populations. Paranasal augmentation is becoming an increasingly popular procedure for patients with mild concavity and normal occlusion. In this study, we evaluate clinical outcomes following a series of paranasal augmentation. Methods: A retrospective review was performed for patients with Class I occlusion who had undergone bilateral paranasal augmentation using custom-made silicone implants, between October 2005 and September 2013. Patient charts were reviewed for demographic information, concomitant operations, and postoperative complications. Preoperative and postoperative (1-month) photographs were used to evaluate operative outcome. Results: The review identified a total of 93 patients meeting study criteria. Overall, aesthetic outcomes were satisfactory. Five-millimeter thick silicone implant was used in 81 cases, and the mean augmentation was 4.26 mm for this thickness. Among the 93 patients, 2 patients required immediate implant removal due to discomfort. An additional 3 patients experienced implant migration without any extrusion. Nine patients complained of transient paresthesia, which had resolved by 2 weeks. There were no cases of hematoma or infection. All patients reported improvement in their lateral profile and were pleased at follow-up. Complications that arose postoperatively included 9 cases of numbness in the upper lip and 3 cases of implant migration. All cases yielded satisfactory results without persisting complications. Sensations were fully restored postoperatively after 1 to 2 weeks. Conclusion: Paranasal augmentation with custom-made silicone implants is a simple, safe, and inexpensive method that can readily improve the lateral profile of a patient with normal occlusion. When combined with other aesthetic procedures, paranasal augmentation can synergistically improve outcome and lead to greater patient satisfaction.