• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.412-415
• /
• 2003

It is important to classily fault types, discriminate fault section and calculate the fault location by any detecting technique for combined transmission lines. This paper proposes the technique to classily the fault types and fault section using neuro-fuzzy systems. Neuro-fuzzy systems are composed of three parts to perform different works. First, neuro-fuzzy system for fault type classification is performed with approximation coefficient of currents obtained by wavelet transform. The second neuro-fuzzy system discriminates the fault section between overhead and underground with detail coefficients of voltage and current. The last neuro-fuzzy system calculates the fault location with impedance in this paper, neuro-furry system shows the excellent results for classification of fault types and discrimination of fault section.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.999-1004
• /
• 2011

Nowadays, it is becoming difficult to secure a transmission line route when a new transmission line is constructed due to social environment and resident complaints. As existing urban areas are expanded and new cities are constructed, the necessity of high-capacity underground power transmission has been increasing because of load concentration in downtown areas. In North America, Europe and Japan, the research has been carried out for 2nd generation gas insulated transmission lines(GIL) which is more environmentally friendly and economical compared to previous GILs. The new GILs have been applied to real power systems from early 2000s. In South Korea, GIL is being considered as a possible solution for replacing 345kV high-capacity overhead transmission lines with underground transmission ones, so KEPCO is planning to develop and apply a new 362kV rated GIL underground transmission lines instead of overhead transmission lines. In this paper, the overvoltage generated at the combined transmission line adapting GIL was reviewed using EMTP.

• 한국CDE학회논문집
• /
• 제15권4호
• /
• pp.279-288
• /
• 2010

In this paper, a DEVS(Discrete EVent Systems Specification)-HLA(High Level Architecture) interface was developed in order to perform the simulation using the combined discrete event and discrete time simulation model architecture in a distributed environment. The developed interface connects the combined simulation model with the HLA/RTI(Run-Time Infrastructure) which is an international standard middleware for distributed simulation. The interface consists of an interface model, a model interpreter, and a distributed environment interpreter. The interface model was defined by using the combined simulation architecture in order to easily connect the existing combined simulation model without modification with the HLA/RTI. The model interpreter takes charge of data transmission between the interface model and the combined simulation model. The distributed environment interpreter takes charge of data transmission between the interface model and the HLA/RTI. To evaluate the applicability of the developed interface, it was applied to the diving simulation of a submarine in a distributed environment. The result shows that a simulation result in a distributed environment using the interface is the same to the result in a single computing environment.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.82-91
• /
• 2014

The combined generator system by integrating several renewable energy sources can share the electrical infrastructure and therefore have the advantage of constructing not only the transmission system but also the power conversion system. Among the various combined renewable system, the wind power and wave power has a high possibility of future growth due to the economic feasibility in offshore environment. This kind of large-scale combined systems might be follow the determination by the transmission system operator's directions and control the output profile by focusing at PCC. However, both renewable energies are depend on the unpredictable environmental variation; it is needed to do the compensation devices. In this paper, the ESS compensation plan is proposed to do output determination of the combined generator system by paying attention to active power of utility grid with the analysis of the controllable elements of the wind and wave power generator. The improvement of the new application technique of the combined system is confirmed through using the PSCAD/EMTDC. The entire simulation process was designed by adopting the active power control according to the reference signal of TSO.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.351-356
• /
• 2010

We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

• Journal of Communications and Networks
• /
• 제15권5호
• /
• pp.486-495
• /
• 2013

In this article, we suggest a two-dimensional genetic algorithm (GA) method that applies a cognitive radio (CR) decision engine which determines the optimal transmission parameters for multicarrier communication systems. Because a CR is capable of sensing the previous environmental communication information, CR decision engine plays the role of optimizing the individual transmission parameters. In order to obtain the allowable transmission power of multicarrier based CR system demands interference analysis a priori, for the sake of efficient optimization, a two-dimensionalGA structure is proposed in this paper which enhances the computational complexity. Combined with the fitness objective evaluation standard, we focus on two multi-objective optimization methods: The conventional GA applied with the multi-objective fitness approach and the non-dominated sorting GA with Pareto-optimal sorting fronts. After comparing the convergence performance of these algorithms, the transmission power of each subcarrier is proposed as non-interference emission with its optimal values in multicarrier based CR system.

• 한국전자파학회논문지
• /
• 제17권11호
• /
• pp.1120-1131
• /
• 2006

본 연구는 combined integration/matrix method에 의해 다양한 접지 시스템의 특성을 모의할 수 있는 수치 해석 기법에 관한 연구이다. Combined integration/matrix method는 접지 시스템을 일정한 길이의 요소로 분할하여 미리 적분을 한 후 적분된 길이 요소 기법에 대해 matrix method를 사용하는 방법으로 연산 시간 및 해석시 에러 발생을 줄일 수 있다. 이를 위해 본 연구에서는 수치 해석시 분할 요소 길이에 대한 오차 분석을 통해 최적의 요소길이 산정 방법을 제시하였으며 이를 통해 실규모 접지 시스템의 다양한 형태의 접지 시스템의 성능 분석이 가능하도록 하였다. 오차 분석을 토대로 접지 전극의 길이와 매설 깊이에 따라 적절하게 요소의 길이를 도출한 결과 분할하고자 하는 요소의 길이는 매설 깊이와 접지 도체의 길이에 주요한 상관 관계가 있음을 알 수 있었으며 본 연구에서 제시한 수치 해석 모델링 방법에 따라 3 % 이내의 해석 정확도를 얻을 수 있었다. 또한, 이를 다중 접지계 해석에 적용하여 현재 산업 플랜트 접지 방식에서 가장 논란이 되고 있는 전원 접지계와 신호/통신 접지계의 공통 접지 및 분리 접지의 영향 평가 등에 활용될 수 있음을 보여주었다.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.734-742
• /
• 2011

In this paper a robust method is presented for the combined design of STATCOM and Power System Stabilizer (PSS) controllers in order to enhance the damping of the low frequency oscillations in power systems. The combined design problems among PSS and STATCOM internal ac and dc voltage controllers has been taken into consideration. The equations that describe the proposed system have been linearized and a Fuzzy Logic Controller (FLC) has been designed for the PSS. Then, the Particle Swarm Optimization technique (PSO) which has a strong ability to find the most optimistic results is employed to search for the optimal STATCOM controller parameters. The proposed controllers are evaluated on a single machine infinite bus power system with the STATCOM installed in the midpoint of the transmission line. The results analysis reveals that the combined design has an excellent capability in damping a power system's low frequency oscillations, and that it greatly enhances the dynamic stability of power systems. Moreover, a system performance analysis under different operating conditions and some performance indices studies show the effectiveness of the combined design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.454-457
• /
• 1997

As in most industrial processes, the dynamic characteristics of an electric power system are subject to changes. Amongst those effects which cause the system to be uncertain, faults on transmission lines are considered. For the stabilization of the power system, we present an indirect adaptive control method, which is capable of tracking a sudden change in the effective reactance of a transmission line. As the plant dynamics are nonlinear, an input-output feedback linearization method equipped with nonlinear damping terms is combined with an identification algorithm which estimates the effect of a fault. The stability of the resulting adaptive nonlinear system is investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1221-1224
• /
• 1996

As in most industrial processes, the dynamic characteristics of an electric power system are subject to changes. Amongst those effects which cause the system to be uncertain, faults on transmission lines are considered. For the stabilization of the power system, we present an indirect adaptive control method, which is capable of tracking a sudden change in the effective reactance of a transmission line. As the plant dynamics are nonlinear, an input-output feedback linearization method is combined with an identification algorithm which estimates the effect of a fault.