• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.395-406
• /
• 2016

도시화로 인한 인구집중 및 개발 집중현상으로 하천변 저지대 및 지하공간 사용이 증가하였고, 불투수층이 증가하여 도시유역의 배수체계는 우수관거에 의존하고 있다. 이러한 변화로 인한 우수관거의 저류용량 부족 및 외수위의 영향으로 인한 도심지 역류 현상으로 인한 침수피해가 발생하고 있다. 하지만 기존의 홍수범람에 관한 연구는 대부분 외수범람과 내수침수를 유기적으로 연결하지 못하고 있다. 본 연구에서는 상습침수가 발생하는 도시유역에 대하여 도시유역 유출특성을 고려한 홍수의 정확한 예측을 위해 강우분석 및 외수위를 고려하고, 도시유출모형인 SWMM 모형을 이용하여 하수관거의 월류를 분석하였고, 이 결과를 홍수범람해석 모형과 연계하여 도시유역에서의 집중호우 발생시 침수해석을 실시하여 수방시설물의 홍수배제 효율을 분석하였다. SWMM 모형의 적용결과 외수위영향에 따른 원활한 내수배제가 불가능 한 것으로 나타났고, 관거 월류량이 많아진 것으로 나타났다. 월류된 우수가 지면을 따라 흐를 경우 저지대의 침수가 예상되고, 월류량이 많은 맨홀을 주요맨홀로 선정하였고, 월류수 저감을 위한 방안으로 주요 맨홀의 인근 지역에 저류지를 설치하는 방안과 각 맨홀들을 연결하는 관거를 확대하는 방안을 설정하였다. 월류 저감 시나리오 적용 결과 저류지 설치시 월류량의 45%, 관거 확대시 33~64%의 저감효과를 보였다. SWMM 모형의 결과를 이용하여 홍수범람해석 모형을 모의한 결과 지표경사와 도로를 따라 맨홀 월류수가 모여 침수현상을 발생시키는 것으로 나타났으며, 관거 확대 적용시 침수면적이 19.6%, 60.5% 줄어든 것으로 나타났다.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.557-564
• /
• 2009

A combined sewer system can quickly drain both storm water and sewage, improve the living environment and resolve flood measures. A combined sewer system is much superior to separate sewer system in reduction of the non-point source pollutant load. However, during rainfall. it is impossible in time, space and economic terms to cope with the entire volume of storm water. A sewage system that exceeds the capacity of the sewer facilities drain into the river mixed with storm-water. In addition, high concentration of CSOs by first-flush increase pollution load and reduce treatment efficiency in sewage treatment plant. The aim of this study was to develope a processing unit for the removal of high CSOs concentrations in relation to water quality during rainfall events in a combined sewer. The most suitable operational design for processing facilities under various conditions was also determined. With a designed discharge of 19.89 m/min, the removal efficiency was good, without excessive overflow, but it was less effective in relation to underflow, and decreased with decreasing particle size and specific gravity. It was necessary to lessen radius of vortex separator for increasing inlet velocity in optimum range for efficient performance, and removal efficiency was considered to high because of rotation increases through enlargement of comparing height of vortex separator in diameter. By distribution of influent particle size, the actual turbulent flow and experimental results was a little different from the theoretical removal efficiency due to turbulent effect in device.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.547-556
• /
• 2005

The objective of this study is to obtain adequate intercepting flow during wet weather conditions in combined sewer system. Two study sites are selected under considering different population density, one is developed area with heavy urbanization. Another is recently developing area. In the analysis of field investigation, SS was most significant in initial flushing effects compared with other factors and showed the result with the order of COD, TP, TN. As compared with event mean concentration(EMC) of runoff, BOD, TN and TP showed high concentrations in wide area with relatively large population density. It is by the reason that much pollution load was discharged to receiving water from urbanized area during wet period. According to results of storm-water modeling, 53% of total COD and 52% of total SS pollution load were discharged to receiving water by overflow than intercepting capacity in middle population density site. Also, in the urbanized area, pollution load was discharged to receiving water by 49% of total COD and 77% of total SS. These results can be applied to setup for pollution load flow(budget) generation, collection, treatment and discharging in order to obtain adequate intercepting flow.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.654-660
• /
• 2011

One of the best way to control Combined Sewer Overflow (CSO) is proposed to construct first flush storage tank. But there is little known parameters for optimum design of these facilities. This study was conducted to get optimum design parameters for a first flush storage tank construction. The optimization of the tank is generally based upon some measure of SS(Suspended Solid) mass holding efficiency. Water quality deterioration of receiving water body happened right after first time occurring rainfall in dry weather seasons. So, design rainfall intensity is used at 2 mm/hr for peak of monthly average intensities of dry seasons. The capacities for each evaluated catchment are designed from 14.4 min to 16.1 min HRT of CSOs flow at design rainfall intensity. Owing to all storage tanks are connected to interception sewer having a redundancy, the suggested volume could be cut down.

• 한국지능시스템학회논문지
• /
• 제22권6호
• /
• pp.722-728
• /
• 2012

도심지역의 하수관거 시스템은 우수 수용능력 및 하수 월류 발생 등의 시스템의 한계점을 가지고 있어, 강우시 우수 유출수로 인한 침수저감과 더불어 도시비점오염원의 저감에 모두 대응할 수 있는 저류시설의 도입이 주목받고 시작하였다. 최근 환경부에서는 방재적 우수관리와 더불어 합류식 하수관거 월류수, 분류식 우수관거 유출수 처리를 포함하는 다기능 저류시설을 "하수저류시설"이라 통칭하고, 이의 도입을 적극 추진하고 있는 실정이다. 반면 대규모 단일 저류시설 설치의 경우에는 공간 확보의 문제가 발생할 수 있으며, 이에 대안으로는 중 소규모의 분산형 저류시설 설치 및 운영을 들 수 있다. 본 연구에서는 분산형 저류시설-하수관망 네트워크 시스템의 최적 운용을 위한 모델 예측 제어기법을 제안한다. 이를 위해 첫째로 네트워크 시스템의 각 구성 요소의 수리모델을 제시함으로써 보다 정밀한 하수관망 네트워크의 거동을 모사하고자 한다. 둘째로 제안된 모델을 기반으로 현재의 강우 유입량을 고려하여 각 저류조의 수위, 하수관로의 유입/유출량을 예측하여, 입자군집 최적화 알고리즘을 이용한 모델 예측 제어기법을 바탕으로 주어진 제약조건을 만족하며 상황을 바탕으로 제안된 제어기법의 사용여부에 따른 효과를 비교 분석하고, 이의 타당성을 검증하고자 한다.

• 산업기술연구
• /
• 제22권B호
• /
• pp.95-101
• /
• 2002

Much of domestic city is served by combined sewer system rather than separate sanitary or storm sewers. During wet weather, when the volume of sanitary sewage and storm water entering the combined sewers exceeds the system capacity, the system is designed to overflow at several designated CSOs. The objective of this research is to have grasp of characteristics of combined sewer runoff and to evaluate efficiently the intercepted volume of CSOs. During the wet weather in first rainfall, SS load at each site H-1, H-2, and H-3 were 600kg/event, 370kg/event, and 289kg/event, SS load at each site in second rainfall were 216kg/event, 113kg/event, and 37.2kg/event. EMCs at each site were 702mg/L, 816mg/L, 861mg/L in first rainfall and 99.9mg/L, 161.9mg/L, 103.6mg/L in second rainfall, respectively. First flush coefficients b at each site were 0.237, 0.166, and 0.151.

• 상하수도학회지
• /
• 제24권4호
• /
• pp.463-474
• /
• 2010

In this study, chemical coagulation conditions for treating combined sewer overflow(CSO) occurred during rainy season were evaluated by jar tests with aluminum sulfate[$Al_2(SO_4)_3{\cdot}17H_2O$] and ferric chloride[$FeCl_3{\cdot}6H_2O$]. The raw domestic sewage sampled from the primary sedimentation tank at a local sewage treatment plant was filtered through $150{\mu}m$ sieve before using. Point of zero charge(PZC) for various dose of aluminum sulfate occurred at pH 5.8-6.5, while for ferric chloride occurred at pH 5.3-6.0 in term of streaming current(SC) values. Charge neutralization ability of aluminum sulfate was bigger than that of ferric chloride. Optimum pH and dose of aluminum sulfate and ferric chloride were 6.2, 0.438mM and 5.8, 0.925mM, respectively. Removal efficiencies of TCOD, turbidity, SS and TP were 75, 97, 95, 96% with aluminum sulfate and 74, 96, 98, 99% with ferric chloride at their optimum coagulation conditions. More efficient removal of SS, TP and small particles was possible with ferric chloride at optimum coagulation conditions. Both SC values and COD removal started to increase where soluble phosphorus was completely removed.

• 상하수도학회지
• /
• 제25권6호
• /
• pp.959-970
• /
• 2011

The frequent occurrence of sewer flooding and the intermittent discharge of non-point pollutions into the receiving water body are emerging issues recently due to the climate change and urbanization. These problems might be solved by introducing a multifunctional storage facility. Unlike a single-purpose storage facility, a multi-purpose storage facility should be operated at an instant to meet for flood prevention, reduction of non-point pollution and/or rainwater reuse. Considering various operational combinations it is suggested that prevention of sewer flooding coupled with reduction of non-point pollution is the most effective operational strategy for a multi-functional storage facility.

• 한국터널지하공간학회 논문집
• /
• 제16권4호
• /
• pp.347-360
• /
• 2014

최근 기후변화로 인한 도시침수와 합류식 하수관거 월류수 (combined sewer overflow)로부터 처리되지 않은 하수의 하천유입, 그리고 그에 따른 하천의 오염의 방지를 위해 지하방수로/저류조 겸용의 대형 하수터널의 건설이 증가하고 있다. 이러한 대형 하수터널의 경우 대부분 콘크리트 라이닝을 적용하고 있지만 하수관거 내에서 발생되는 황화수소($H_2S$)로 인하여 콘크리트가 부식될 수 있으므로 이에 대한 적절한 보호공이 필요하다. 본 논문에서는 최소 100년의 수명을 고려하여 설계된 대형 하수터널의 콘크리트라이닝 부식을 방지하기 위해 여러 공법들을 소개하고 각 공법의 일반적인 장단점과 설계 사례를 설명하였다. 하지만 대형 하수터널 라이닝의 부식방지 공법들의 적용 실적이 부족하여 부식방지 공법을 적용한 터널설계 대안에 대한 객관적인 평가가 쉽지 않다. 따라서 본 논문은 설계 사례연구를 통해 콘크리트 라이닝 부식방지 공법선정 프로세스를 소개하였다.

• 상하수도학회지
• /
• 제34권3호
• /
• pp.211-220
• /
• 2020

When domestic sewage and rainwater runoff are discharged into a single sewer pipe, it is called a "combined sewer system." The sewage design standards in Korea specify the flow velocity based only on the volume of rainfall; therefore, sedimentation occurs on non-rainy days owing to the reduced flow rate and velocity. This sedimentation reduces the discharge capacity, causes unpleasant odors, and exacerbates the problem of combined sewer overflow concentration. To address this problem, the amount of sewage on non-rainy days, not just the volume of rainfall, should also be considered. There are various theories on sedimentation in sewer movement. This study introduces a self-cleansing velocity based on tractive force theory. By applying a self-cleansing velocity equivalent to the critical shear stress of a sand particle, sedimentation can be reduced on non-rainy days. The amount of sewage changes according to the water use pattern of citizens. The design hourly maximum wastewater flow was considered as a representative value, and the velocity of this flow should be more than the self-cleansing velocity. This design method requires a steeper gradient than existing design criteria. Therefore, the existing sewer pipelines need to be improved and repaired accordingly. In this study, five types of improvement and repair methods that can maximize the use of existing pipelines and minimize the depth of excavation are proposed. The key technologies utilized are trenchless sewer rehabilitation and complex cross-section pipes. Trenchless sewer rehabilitation is a popular sewage repair method. However, it is complex because the cross-section pipes do not have a universal design and require continuous research and development. In an old metropolis with a combined sewer system, it is difficult to carry out excavation work; hence, the methods presented in this study may be useful in the future.