• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1770-1779
• /
• 1995

A combined convective heat transfer study for non-Newtonian fluids was experimentally performed in uniformly heated horizontal tubes with laminar flow in the thermal entry region. Velocity profiles were fully developed at the entrance of the heated sections in the tubes. Aqueous solutions of sodium carboxymethylcellulose(CMC ) were used; their behavior showed a reasonably good fit into the power-law model, .tau.=K.gamma.$^{n}$ . The test sections were made of copper with inside diameters of 3.23 cm and 5.042 cm and lengths of approximately 300 cm. Most experimental runs displayed noticeable secondary flows caused by buoyancy ; when present, secondary flows caused significant increase in the rate of heat transfer over the purely forced-convection case. A correlation, which relates the rate of heat transfer for flows with temperature-dependent properties, free convection effects, and non-newtonian effects, was suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.70-73
• /
• 2007

The forming characteristics of cup-rod combined extrusion process were investigated with process parameter change. Simultaneous forward rod extrusion and backward cup extrusion was conducted with magnesium alloy, AZ31B. Process parameters such as forward extrusion ratio, backward extrusion ratio, and working temperature were controlled in a specific region and the effects of the parameter change were examined. Surface crack was developed in a certain state of the process parameters combination. The crack-free forming limit of the alloy in the combined process was disclosed by the parameter study. The microstructures of the initial and extruded workpieces were observed.

• 한국통신학회논문지
• /
• 제29권1B호
• /
• pp.86-100
• /
• 2004

To provide the end-to-end service differentiation for assured services, the random early demotion and promotion (REDP) marker in the edge router at each domain boundary monitors the aggregate flow of the incoming in-profile packets and demotes in-profile packets or promotes the previously demoted in-profile packets at the aggregate flow level according to the negotiated interdomain service level agreement (SLA). The REDP marker achieves UDP fairness in demoting and promoting packets through random and early marking decisions on packets. But, TCP fairness of the REDP marker is not obvious as for UDP sources. In this paper, to improve TCP fairness of the REDP marker, we propose a modified REDP marker where we combine a dropper, meters and a token filling rate configuration component with the REDP marker. To make packet transmission rates of TCP flows more fair, at the aggregate flow level the combined dropper drops incoming excessive in-profile packets randomly with a constant probability when the token level in the leaky bucket stays in demotion region without incoming demoted in-profile packets. Considering the case where the token level cannot stay in demotion region without the prior demotion, we propose a token filling rate configuration method using traffic meters. By using the token filling rate configuration method, the modified REDP marker newly configures a token filling rate which is less than the negotiated rate determined by interdomain SLA and larger than the current input aggregate in-profile traffic rate. Then, with the newly configured token filling rate, the token level in the modified REDP marker can stay in demotion region pertinently fir the operation of the dropper to improve TCP fairness. We experiment with the modified REDP marker using ns2 simulator fur TCP sources at the general case where the token level cannot stay in demotion region without the prior demotion at the negotiated rate set as the bottleneck link bandwidth. The simulation results demonstrate that through the combined dropper with the newly configured token filling rate, the modified REDP marker also increases both aggregate in-profile throughput and link utilization in addition to TCP fairness improvement compared to the REDP marker.

• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.307-315
• /
• 1995

The purpose of this study was to assess the efficacy of several thermal therapies using ice pack, moist-hot pack and ultrasound, separately and concomitantly and to obtain the background information on the vascular changes after thermophysical therapies. The author had used 15 healthy subjects were examined and the subjects were divide into 5 groups : ice pack, moist-hot pack, ultrasound, ice pack and moist-hot pack, ice pack and ultrasound. Observation were made immediate before and 0,5,10,20,30,45,60,90 minutes after treatment. Thermography was performed in an Agema 870 thermovisio with 0.1$^{\circ}C$ difference of gradual temperature shift. The results were as follows : 1. Using ice pack only, the surface temperature of the masseter region was increased lapse of time, and most remarkably 90 minutes after the treatment. 2. Using moist-hot pack only, the surface temperature of the region was remarkably increased immediately after the treatment, but decreased lapse of time. 3. Using moist-hot pack with ice pack, the surface temperature of the face was remarkably increased immediately after the treatment, and decreased lapse of time, Hyperthermia was maintained for a longer time as compared with the group of moist-hot pack only. 4. Using ultrasound only, the surface temperature of the region was increased gradually, and most remarkably 30 minutes after the treatment, but decreased in the course of time. 5. Using ultrasound combined with ice pack, the surface temperature of the region was gradually decreased until 30 minutes after the treatment, and decrease to some extend at 45 minute. And then a gradual increase observed over the remaining period of the experiment. 6. Hyperthermia were maintained for a long time in the groups using ice pack combined with moist-hot pack and ultrasound as compared with the other groups. Our data suggest that ice pack can promote the efficacy of other thermal therapies.

• 전자공학회논문지CI
• /
• 제43권1호
• /
• pp.27-34
• /
• 2006

본 논문에서는 영상의 에지와 칼라 분포를 부영상(sub-image)의 단위로 기술하기 위해 MPEG-7의 여러 가지 서술자 중 에지히스토그램 서술자(EHD: Edge Histogram Descriptor)와 컬러레이아웃 서술자(CLD: Color Layout Descriptor)를 조합한 영역기반 영상 검색 시스템을 제안한다. 영상 내의 관심영역 (ROI) 선택의 기본 단위는 영상 공간을 $16(4{\times}4)$개의 겹치지 않는 영역으로 분할한 EHD의 부영상 블록이다. 따라서 영상 특징 벡터에 대한 블록-대-블록의 일-대-일 대응 관계를 유지하기 위해 CLD의 기술자는 $8{\times}8$ 역 DCT (IDCT)를 통해 $4{\times}4$의 각 부영상에 대응하는 컬러 특징을 생성한다 제안된 방법이 MPEG-7의 기술자에 대해 관심영역기반 영상 검색에 적용될 수 있음을 실험을 통해 제시하였다.

• 정보처리학회논문지B
• /
• 제14B권4호
• /
• pp.255-262
• /
• 2007

본 연구는 칼라 이미지에서 인물의 얼굴 영역을 검출하는 개선된 색상 기반 방식을 제안한다. 제안 방법은 RGB, $YC_bC_r$, YIQ의 세 가지 색상 모델을 조합, 각각 휘도와 색도 성분 조합 히스토그램을 구축하고 구축된 색상 조합 히스토그램을 역전파방식의 신경망에 입력한 후 학습단계의 반본 과정에 Levenberg-Marquadt 알고리즘을 적용한다. 제안 방법은 신경망 학습과정에 Levenberg-Marquadt 알고리즘을 적용하여 얼굴 검출에 가장 많이 사용되는 방법 중 하나인 역전파 신경망이 지역 최소값에 봉착하는 문제점을 해결함으로써 검출 오류율을 낮추는데 기여한다. 또한 색상 조합 히스토그램을 사용한 새로운 색상 조합 기반의 얼굴 영역 검출 방법은 빛의 영향에 강건하도록 휘도 성분을 분리하고 색도 성분을 강조하여 단일 색상 히스토그램보다 신경망에 더 신뢰성 있는 값을 입력함으로써 단일 색상 공간을 사용했을 때보다 높은 얼굴 검출율을 보인다. 실험 결과는 제안 방식이 얼굴 영역 검출 개선에 효과적이며 빛의 변화에 강건함을 보여준다.

• 품질경영학회지
• /
• 제38권3호
• /
• pp.463-474
• /
• 2010

In this study, we evaluate the efficiency of Construction Industry using Data Envelopment Analysis(DEA). Since the Construction Industry has been traditionally operated through competition, it is important to measure the efficiency. In this paper, we empirically analyze the Efficiency of the 50 Korean Construction Industry. In detail, we used the scale of efficiency in order that efficiency cannot be affected by the total technical efficiency of each company and the scale of DMU by applying CCR or BBC model. Also, we analyzed the changes of measurement DEA model score. we adopted the basic DEA, RTS Region and MPSS(Most Productive Scale Size) method which are combined with efficiency measurement model in order to analyze the operational status. Furthermore, by complementing the shortfalls of the scale efficiency value of the DEA Model, RTS Region Model can be recommended to be appropriate in the evaluation of ideal input/output Quantity. In particular, input variables are total assets, construction capacity, the technical staff and output variables are sales volume, operating income. The result of RTS Region and MPSS shows that 9 DMUs of the efficiency frontier in the Construction Industry are analyzed to be relatively efficient DMUs, and 41 DMUs are analyzed to be inefficient DMUs, and finally inefficient DMUs are separated with Region 1 and Region 6.

• 환경영향평가
• /
• 제18권5호
• /
• pp.313-319
• /
• 2009

A complex maritime resort combined marina and with course of Korea is required to improve international tourism competitiveness by taking advantage of her environmental favorable circumstances. The development of tourism, however, is focused on land-oriented that incurred lower tourism efficiency and international tourism competitiveness. In addition, the regulation of "Preliminary environmental assessment for golf courses" by the Ministry of Environment is emphasized on land geography and geology that can cause damage of tourist attractions in an island region. In particular, the development of 6th or 7th ridges in mountainous island region within 2km from the sea, that holds scenic and academic value, can go against environment-friendly by geographical and geological damage. According to the regulation for consultation for golf courses and forestry is to preserve regional ecosystem over 6th ridge, but it cannot be applicable to island region because that can form excessive slopes where marine ecosystem is required to be maintained. It, therefore, can be desirable that the development of over 6th ridge in an island region. It is suggested that continuous comparative studies of geographical and geological characteristics between land and island region will be carried on to establish feasible and reasonable development model so that balanced development of land and island, and versatile international environment-friendly maritime resort can be achieved and developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.376-381
• /
• 1992

This paper presents an expert system for the segmentation of a 2.5-D image. The results of two segmentation approaches, edge-based and region-based, are combined to produce a consistent and reliable segmentation. Rich information embedded in the 2.5-D image is utilized to obtain a view independent surface patch description of the image, which can facilitate object recognition considerably.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회.한국자기공명학회 2005년도 공동학술대회
• /
• pp.77-78
• /
• 2005

A specific FUS-MRI platform was designed for breast cancer treatment. phased array technologies, sideways FUS transmission, and spatio-temporal temperature control in the complete region of interest, were combined for a novel therapy approach with enhanced safety and afficacy. A phase I clinical trial will start soon.