• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.859-869
• /
• 2012

In this paper, a new method to efficiently generate the 3-D(three-dimensional) video holograms for 3-D moving scenes, which is called here the TSR-N-LUT method, is proposed by the combined use of temporal-spatial redundancy(TSR) of 3-D video images and novel look-up table(N-LUT) technique. That is, in the proposed scheme, with the differential pulse code modulation (DPCM) algorithm, temporally redundancy redundant data in the inter-frame of a 3-D video images are removed between the frames, and then inter-line redundant data in the inter-frame of 3-D video images are also removed by using the DPCM method between the lines. Experimental results show that the proposed method could reduced the number of calculated object points and the calculation time of one object point by 23.72% and 19.55%, respectively on the average compared to the conventional method. Good experimental results with 3-D test moving pictures finally confirmed the feasibility of the proposed method to the fast generation of CGH patterns of the 3-D video images.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1380-1389
• /
• 2015

Prx1, an AhpF-dependent 2-Cys peroxiredoxin (Prx), was previously identified in Vibrio vulnificus, a facultative aerobic pathogen. In the present study, transcription of the V. vulnificus prx1ahpF genes, which are adjacently located on the chromosome, was evaluated by analyzing the promoter and intergenic region of the two genes. Northern blot analyses revealed that transcription of prx1ahpF results in two transcripts, the prx1 and prx1ahpF transcripts. Primer extension analysis and a point mutational analysis of the promoter region showed that the two transcripts are generated from a single promoter. In addition, the 3' end of the prx1 transcript at the prx1ahpF intergenic region was determined by a 3'RACE assay. These results suggested that the prx1ahpF genes are transcribed as an operon, and the prx1 transcript was produced by transcriptional termination in the intergenic region. RNA secondary structure prediction of the prx1ahpF intergenic region singled out a stem-loop structure without poly(U) tract, and a deletion analysis of the intergenic region showed that the atypical stem-loop structure acts as the transcriptional attenuator to result in the prx1 and prx1ahpF transcripts. The combined results demonstrate that the differential expression of prx1 and ahpF is accomplished by the cis-acting transcriptional attenuator located between the two genes and thereby leads to the production of a high level of Prx1 and a low level of AhpF.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.116-128
• /
• 2010

Modeling of the three phase electric arc furnace and its voltage flicker mitigation are the purposes of this paper. For modeling of the electric arc furnace, at first, the arc is modeled by using current-voltage characteristic of a real arc. Then, the arc random characteristic has been taken into account by modulating the ac voltage via a band limited white noise. The electric arc furnace compensation with static VAr compensator, Thyristor Controlled Reactor combined with a Fixed Capacitor bank (TCR/FC), is discussed for closed loop control of the compensator. Instantaneous flicker sensation curves, before and after accomplishing compensation, are measured based on IEC standard. A new method for controlling TCR/FC compensator is proposed. This method is based on applying a predictive approach with closed loop control of the TCR/FC. In this method, by using the previous samples of the load reactive power, the future values of the load reactive power are predicted in order to consider the time delay in the compensator control. Also, in closed loop control, two different approaches are considered. The former is based on voltage regulation at the point of common coupling (PCC) and the later is based on enhancement of power factor at PCC. Finally, in order to show the effectiveness of the proposed methodology, the simulation results are provided.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.353-371
• /
• 2014

We already have seen many studies and articles about the methodology responding the security risks and threats. But we still have some controversial subjects to be settled. Now, we are living in the era that we should focus on how to use the security systems instead of how to make it. In this point of view, a company need to find out the answer for these questions, which security risks have to be handled in a corporate, which system is better for responding the security threats, and how we can build necessary security architecture in case of developing systems. In this article, we'd like to study on-site scenarios threatening the corporate assets, the limit on dealing with these threats, and how to consolidate the security events and information from enormous assets. Also, we'd like to search for the direction form the actual cases which have shown the desired effect from converging the assets and network informations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.78-78
• /
• 1998

The purpose of this research is to develop a CAD-based program for data analysis of digital elevation model(DEM) on the aspect of landscape assessment. When handling DEM data as a visual simulation of topographic landscape, it is basic interest to analyze visible area and visualize visual sensitivity distributions. In reference with landscape assessment, more intuitive and interactive visualizing tools are needed, specially in area of visual approach. For adaptability to landscape assessment, algorithmic approaches to visibility analysis and concepts for visual sensitivity calculation in this study were based on processing techniques of entity data control functions used in AutoCAD drawing database. Also, for the purpose of quantitative analysis, grid-type 3DFACE entities were adopted as mesh unit of DEM structure. Developed programs are composed of main part named VSI written in AutoLISP and two of interface modules written in dialog control language(DCL0 for user-oriented interactive usage. Definitions of camera points(view points) and target points(or observed area) are available alternatively in combined methods of representing scenic landscape, scenery, and sequential landscape. In the case of scene landscape(single camera to fixed target point), only visibility analysis in available. And total visibility, frequency of cumulative visibility, and visual sensitivity analysis are available in other cases. Visual sensitivity was thought as view angle(3 dimensional observed visual area) and the strengths were classified in user defined level referring to statistical characteristics of distribution. Visibility analysis routine of the VSI was proved to be more effective in the accuracy and time comparing with similar modules of existing AutoCAD third utility.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.861-868
• /
• 2010

As CAS, X-ATK, and INT models considered as the most typical Air-to-Ground operation models in ROKAF are mainly designed as the voice-centered system between aircraft and ground control facilities, it is critical to newly develop the Link-16 based model for the ROK-US combined operation between F-15K, AWACS, M-SAM, and KDX-III equipped with Link-16. Former studies had been limited to the CAS operation, and they had mainly focused on reducing the voice transmission time to exchange the information between each mission step with maintaining existing operation steps. Therefore, this paper makes up the weak point in former studies, thereby designing new Air-to-Ground operation model for CAS, X-ATK, INT mission using Enterprise Architecture OV6c, which enables both aircraft and ground control facilities or between aircraft to obtain the real-time information on the location, identification, armament and the real-time image data through the broadcasting function. Based on the analysis of new operation model, we come to a conclusion that by simultaneously exchanging the information on mission between nodes concerned through the broadcasting function of Link-16. It is possible to cut down superfluous steps among the mission steps, and to reduce the mission time. It is clear that it gives rise to improve the battle efficiency and the decision-making tempo as well as the battlefield situational awareness.

• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.23-32
• /
• 2003

This study aims at the derivation of representative IUH considering geomorphological factors. Nash model has been combined with geomorphological IUH to estimate the parameters of representative IUH. For this purpose, total 18 storm events which have been recorded upstream parts of Sangye control point in Bocheong river watershed, one of the tributary of Keum river basin, have been analysed. The results show that n value is 3.17 and K value is 7.01. And the results also show that IUHs driven by the method of moments vary with each storm events significantly. As a result of this study the IUH could be median distribution which is representative IUH among each storm events. It is believed that this result considered geomorphological factors is more superior and physically meaningful comparing with the existing methods.

• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.88-96
• /
• 1980

Reaction conditions in the amino-carbonyl reaction, and the effect of amino acids on the reactivity of amino-carbonyl reaction were investigated. Results obtained are as follows : 1. When the pH of the reaction mixture was increased above the isoelectric point of an amino acid, a significant increase in the color intensity was observed. 2. The color intensity increased gradually up to 1 : 1 of the molar ratio of reactants. This result was interpreted to show that sugar and free amino group combined in 1 : 1 ratio. 3. Amino-carbonyl reaction showed a significant time and temperature-dependences. The activation energy at 0.2 M glucose and 0.2 M glycine system was 37.5 Kcal/mole. 4. Among amino acids tested, glycine, lysine and $\beta$-alanine caused a significant increase in the color intensity, but acidic amino acids showed the least color intensity. The latter was interpreted to show that one of carboxyl groups of acidic amino acid has an inhibiting effect on the reactivity of the amino group. 5. The color intensity of sugars tested was in the order of xylose>arabibose>fructose>glucose>maltose>lactose.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3270-3278
• /
• 2014

Many researches has been conducted as extreme rainfall in hydrology and extreme rainfall analysis is not proper for determination of CSOs treatment capacity. In this study, runoff is calculated by tranformation from rainfall to runoff according to Interevent Time Definition. The capacity of sewage treatment plant is designed by 3 times of DWF(Dry Weather Flow) and the efficiency of present sewage treatment plant is very low becauseat at present. Also, The sewage treatment plant can not control CSOs. In this research, the pollution load is calculated by EMC(Event Mean Concentration) and pollution concetration of total runoff is a standard deciding suitablility of present sewage treatment plant. Finally, CSOs treatment capacity is determinated considering pollution load.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.554-565
• /
• 2008

The French neo-impressionist painter, George Seurat, introduced pointillism under the theory that the individual pigments of colors on the canvas are reconstructed on the human retina. Pointillism is a painting technique in which many small brush strokes are combined to form a picture in the canvas. When such a painting is seen from a far, the individual stroke color are unnoticeable and they are seen as intermixed colors. This is called juxtaposed color mixture. In this paper, we present a painterly rendering method for generating the pointillism images. For expressing countless separate dots which shown in the pointillism works, we propose a hierarchical points structure using Wang The method. Also a user defined palette is constructed based on the usage that Neo-Impressionist painter works on his palette. Lastly, based on this, a probability algorithm will be introduced, which divides the colors in the image(sampled by hierarchical point structure) into juxtaposed colors. A hierarchical points set which undergone juxtaposed color division algorithm is converted into brush strokes.