• Plant Journal
• /
• 제11권2호
• /
• pp.32-38
• /
• 2015

This study was conducted on combined cycle power plant consisting of HRSG with integral deaerator type to avoid tube failures of low pressure evaporator tubes. Based on the observation of pH variation at the discharge of boiler feed water pump by continuous pH measurement for a period of time, it was identified that pH of feed water is getting reduced as ammonia is distributed into vapor and liquid depending on the distribution ratio of ammonia in the LP drum after the deaerator. To solve this problem, the counterplan was prepared by reexamination of ammonia injection point and quantity. In conclusion, it was accomplished that 9.2~9.6 is the optimized pH range for boiler feed water by arranging additional piping for ammonia to inject directly to LP drum.

• Korean Institute of Interior Design Journal
• /
• 제21권1호
• /
• pp.40-50
• /
• 2012

This study aims at suggesting the applicability of color combination based upon the characteristics of environmental color perception and the nuance concept of Natural Color System(NCS). The results are summarized below: First, NCS is a scientific coloring system in consideration of the relevance between people, light and environment, to be based on a phenomenological point of view. NCS can be called a psychometric model reflecting our natural color sense. Second, the color triangle established by NCS is one of the methods of expression based on the human visual mechanism, which is classified by two attributes of hue and nuance, not by the three color attributes of hue, lightness and saturation. The nuance concept of NCS implies the impression, atmosphere and tone that are perceived in colors, which are related to lightness and saturation. Accordingly, this paper suggests that the coloring arrangement emphasizing nuance and tone is more useful than hue in color planning. Third, aesthetic impression in environmental color perception is inclusive of instantly perceptive nuance, which is connected with affordance. The affordance is revealed by the different relation of similarity. In this regard, a strong relationship is noticed between color combination and the sense of pleasantness. The hypothesis regarding the complementation and similarity of contrasting nature is judged to provide observers with aesthetic order. Finally, this paper also suggests four harmonizing methods in the NCS color triangle based upon equal blackness, equal whiteness, equal chromaticness and same nuance. At the same time, opposition and a different concept of hue, lightness and lightness are combined complementarily with the nuance value to suggest patterns of color combination.

• The Journal of Industrial Distribution & Business
• /
• 제11권2호
• /
• pp.49-59
• /
• 2020

Purpose: Online and social media and mobile shopping are increasing and companies are required to provide personal information in order to supplement the non-invasive characteristics of the channels. With the increased provision of personal information, consumers' personal and social concerns about the prevention of personal information infringement are also increasing, and in response, personal or opt-in marketing has emerged to compensate for reckless information abuse. Despite the background of this emergence, the existing prior studies are limited to ignoring the negative feelings of consumers in the real world, including only the net function and positive effect of the opt-in mail. Research design, data and methodology: The research framework was intended to utilize the impact of human marketing activities on consumer attitudes combined with positive and negative factors. Factors that positively affect attitudes toward permation marketing were presented, such as informality, and perceived risks were presented as negative impact factors. Also, based on previous prior research, the prior factors of opt-in marketing were to present the effect on purchase intent through the medium of attitude toward opt-in marketing. Results: In this study, we used the framework of a two factor theory to address positive and negative factors as a leading factor in the customer attitude toward opt-in mail advertising, and as a result, functionality and personalization have a positive effect on customer attitude and perceived risk have a negative impact on customer attitude. In addition, it was confirmed that the customer attitude formed this way affects the intention to purchase again. Conclusions: This study suggests that we have demonstrated that marketing, an opt-in marketing that has been recognized as part of marketing that is deployed after obtaining customer consent, has been applied without any other marketing methodology. E-mail advertising at this point also provides practical implications that the system safeguards are in place under an opt-in protocol or system, and that even if an e-mail advertisement is carried out, customers will need to look at the level of awareness about the risks, and suggests that they need to consider the customer's journey that could lead to purchase at the content level.

• Journal of the Korean Society of Safety
• /
• 제35권3호
• /
• pp.58-63
• /
• 2020

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.

• Journal of Digital Convergence
• /
• 제11권5호
• /
• pp.187-199
• /
• 2013

Since the supply of smart phones, a change in mobile environment brought a turning point called a mobile generation. Smart mobile office is a combined form of smart phones' new mobile environment and its social media. A construction of mobile office environment using smart phones brought revitalization of the smart phone market. CRM construction also became new requirements for a customer management. However, based on the current information system audit standard, check fields or check lists are insufficient to apply to audit for CRM construction in a smart mobile office environment. Therefore, this paper proposes a model for auditing CRM system construction in smart mobile office environment. It proposes audit domain and check lists of CRM construction. It also verified whether the proposed model is suitable or not by doing a survey if deduced audit domain and check lists correspond with the purpose of the CRM construction audit during smart mobile office environment. As the result, this study appear to have more than average satisfaction the suitability results were.

• Journal of Environmental Health Sciences
• /
• 제42권4호
• /
• pp.280-292
• /
• 2016

Objectives: The objective of this study was to build COD regression models for the Han River and evaluate water quality. Methods: Water quality data sets for the dry season (as of January) during a four-year period (2012-2015) were collected from the database of the Han River automatic water quality monitoring stations. Statistical techniques, including combined genetic algorithm-multiple linear regression (GA-MLR) were used to build five-descriptor COD models. Multivariate statistical techniques such as principal component analysis (PCA) and cluster analysis (CA) are useful tools for extracting meaningful information. Results: The $r^2$ of the best COD models provided significant high values (> 0.8) between 2012 and 2015. Total organic carbon (TOC) was a surrogate indicator for COD (as COD/TOC) with high reliability ($r^2=0.63$ in 2012, $r^2=0.75$ for 2013, $r^2=0.79$ for 2014 and $r^2=0.85$ for 2015). The ratios of COD/TOC were calculated as 2.08 in 2012, 1.79 in 2013, 1.52 and 1.45 in 2015, indicating that biodegradability in the water body of the Han River was being sustained, thereby further improving water quality. The BOD/COD ratio supported these findings. The cluster analysis revealed higher annual levels of microorganisms and phosphorous at stations along the Hangang-Seoul and Hantangang areas. Nevertheless, the overall water quality over the last four years showed an observable trend toward continuous improvement. These findings also suggest that non-point pollution control strategies should consider the influence of upstreams and downstreams to protect water quality in the Han River. Conclusion: This data analysis procedure provided an efficient and comprehensive tool to interpret complex water quality data matrices. Results from a trend analysis provided much important information about sources and parameters for Han River water quality management.

• Journal of the Korean Society of Safety
• /
• 제30권1호
• /
• pp.21-27
• /
• 2015

In this study, interfacial characteristics between SOFC and Ag paste as current collector was estimated in the high temperature environment. The Ag paste was used to connect the unit cell of SOFC strongly with interconnector and provide the electrical conductivity between them. To confirm electrical conductivity, Ag paste was treated in the furnace at $800^{\circ}C$ for 48 hours. The sheet resistance of Ag paste was measured to compare the resistance values before and after the heat treatment. Also, the four-point bending test was performed to measure the interfacial adhesion. The unit cell of SOFC and $SiO_2$ wafer were diced and then attached by Ag paste. The $SiO_2$ wafer had the center notch to initiate a crack from the tip of the notch. The modified stereomicroscope combined with the CCD camera and system for measuring the length was used to observe the fracture behavior. To compare the characteristics before heat treatment and after heat treatment, the specimen was exposed in the furnace at $800^{\circ}C$ for 48 hours and then the interfacial adhesion was evaluated. Finally, the interfacial adhesion energy quantitatively increases $1.78{\pm}0.07J/m^2$ to $4.9{\pm}0.87J/m^2$ between the cathode and Ag paste and also increase $2.9{\pm}0.47J/m^2$ to $5.12{\pm}1.01J/m^2$ between the anode and Ag paste through the high temperature. Therefore, it is expected that Ag paste as current collector was appropriate for improving the structural stability in the stacked SOFC system if the electrical conductivity was more increased.

• Journal of Acupuncture Research
• /
• 제19권3호
• /
• pp.77-87
• /
• 2002

Like acupuncture, magnetic therapy has been known to yield effectiveness when it is applied to relieve from fatigue, musculoskelectal diseases, sore sites, rheumatic arthritis and chronic pain syndromes. However, combined application of acupuncture and magnet has not yet been studied. This study is designed to investigate effectiveness of acupuncture therapy when in the magnetic field for the pain relief. Magnetic field was made by magnetic ring ($7{\psi}{\times}2.3{\psi}{\times}1.5mm$). Twenty-one male swimmers with latent muscular pain at the GB21 area in the university course of physical education in Daegu were chosen and divided into three groups; 1) acupuncture treatment group (n=7), 2) acupuncture treatment with iron ring group (n=7), 3) acupuncture treatment with magnetic ring group (n=7). Manual Acupuncture was given to the GB21 point for 20 minutes. The degree of pressure pain threshold (PPT, $kg/cm^2$) in GB21 was measured with algometer. Before acupuncture treatment, the PPT values were $6.08{\pm}1.69$, $6.39{\pm}1.72$ and $5.59{\pm}1.11$ in acupuncture treatment group, acupuncture treatment with iron ring group, acupuncture treatment with magnetic ring group, respectively. After acupuncture treatment, the PPT values were $6.48{\pm}2.33$, $6.31{\pm}1.31$ and $6.59{\pm}1.80$, respectively. Pressure threshold was significantly increased in the acupuncture treatment with magnetic ring group compared to the other groups. Based on these results, acupuncture treatment with magnetic ring produced better effects on pain threshold, and these effects can be considered to be associated with the currents or voltages induced by the acupuncture needle and magnetic ring at present.

• The korean journal of orthodontics
• /
• 제48권6호
• /
• pp.405-411
• /
• 2018

Objective: This study was performed to investigate the rate of tooth movement and histological characteristics of extraction sockets those were subjected to corticotomy. Methods: A split-mouth randomized controlled trial experiment was designed. Thirty-two adult, male Wistar rats were divided into 2 groups: healing extraction socket (H) and recent extraction socket (R); these groups were randomly classified into 4 subgroups (0/7/21/60 days). The first maxillary molar was extracted on 1 side and 2 months were allowed for complete bone healing; then, the corresponding molar was extracted on the other side and surgical intervention was performed at the mid-alveolar point of the first maxillary molar. Ten grams of continuous force was applied. The outcomes measured were rate of tooth movement, percentage of periodontal space and histological evaluation. The rate of tooth movement was calculated as the measured distance divided by the duration of molar movement. Histomorphometric evaluations were performed on the second and third maxillary molars. The Wilcoxon signed rank test was used to compare differences between the two groups. Results: There were no significant differences in the rates of tooth movement between H and R groups at any of the 4 time points. The histological appearance and percentage of periodontal space between the R and H groups also demonstrated no significant differences. Conclusions: The rates of orthodontic tooth movement into recent and healed socket sites did not differ between the groups. Histological analysis of tooth movement revealed regional acceleration during every time period.

• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.569-587
• /
• 2014

Triaxial compression creep tests were performed on salt rock samples using cyclic confining pressure with a static axial pressure. The test results show that, up to a certain time, changes in the confining pressure have little influence on creep properties of salt rock, and the axial creep curve is smooth. After this point, the axial creep curve clearly fluctuates with the confining pressure, and is approximately a straight line both when the confining pressure decreases and when it increases within one cycle period. The slope of these lines differs: it is greater when the confining pressure decreases than when it increases. In accordance with rheology model theory, axial creep equations were deduced for Maxwell and Kelvin models under cyclic loading. These were combined to establish an axial creep equation for the Burgers model. We supposed that damage evolution follows an exponential law during creep process and replaced the apparent stress in creep equation for the Burgers model with the effective stress, the axial creep damage equation for the Burgers model was obtained. The model suitability was verified using creep test results for salt rock. The fitting curves are in excellent agreement with the test curves, so the proposed model can well reflect the creep behavior of salt rock under low-frequency cyclic loading. In particular, it reflects the fluctuations in creep deformation and creep rate as the confining pressure increasing and decreasing under different cycle periods.