• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.772-778
• /
• 2005

This paper is concerned with the analysis of material flow characteristics of combined tube extrusion using pipe. The analysis in this paper concentrated on the evaluation of the design parameters for deformation patterns of tube forming, load characteristics, extruded length, and die pressure. The design factors such as punch nose radius, die corner radius, friction factor, and punch face angle are involved in the simulation. The combined tube extrusion is analyzed by using a commercial finite element code. This simulation makes use of pipe material and punch geometry on the basis of punch geometry recommended by International Cold Forging Group. Deformation patterns and its characteristics in combined forward and backward tube extrusion process were analyzed for forming loads with primary parameters, which are various punch nose radius relative to backward tube thickness. The results from the simulation show the flow modes of pipe workpiece and the die pressure at the contact surface between pipe workpiece and punch. The specific backward tube thickness and punch nose radius have an effect on extruded length in combined extrusion. The combined one step forward and backward extrusion is compared with the two step extrusion fer forming load and die pressure.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.27-38
• /
• 1997

The effect of geometry factors on the combined mode stress intensity factor behaviors of a slant crack in a non-uniform thickness material was analysed by 2-dimensional theoretical analysis. The analysis is based on the Laurent's series expansions of complex potentials where the complex coefficients of the series are determined from the compatibility and the equilibrium conditions of the thickness interface and the stress free conditions of the crack surface. In numerical calculations the perturbation technique is employed. The expressions for the crack tip stress intensity factor are given in the form of power series of dimensionless crack length $\lamda$, and the function of crack slant angle $\alpha$ and thickness ratio $\beta$. The results of numerical calculations for each problems are represented as the correction factors F($\lamda$, $\alpha$, $\beta$). The results clearly show the following characteristics : The correction factors of the combined mode stress intensity factors for a non-uniform thickness material can be defined in the form of F($\lamda$, $\alpha$, $\beta$). The stress intensity factor values for a given crack length are decreased with increase of thickness ratio $\beta$.

• International Journal of Railway
• /
• 제1권3호
• /
• pp.113-116
• /
• 2008

The long-tenn exposure of polymeric composite materials to extreme-use environments, such as pressure, temperature, moisture, and load cycles, results in changes in the original properties of the material. In this study, the effect of combined environmental factors such as ultraviolet ray, high temperature and high moisture on mechanical and thermal analysis properties of glass fabric and phenolic composites are evaluated through a 2.5 KW accelerated environmental aging tester. The environmental factors such as temperature, moisture and ultraviolet ray applied of specimens. A xenon-arc lamp is utilized for ultraviolet light and exposure time of up to 3000 hours are applied. Several types of specimens - tensile, bending, and shear specimens that are warp direction and fill direction are used to investigate the effects of environmental factors on mechanical properties of the composites. Mechanical degradations for tensile, bending and shear properties are evaluated through a Universal Testing Machine (UTM). Also, storage shear modulus, loss shear modulus and tan a are measured as a function of exposure time through a Dynamic Mechanical Analyzer (DMA). From the experimental results, changes in material properties of glass fabric and phenolic composites are shown to be slightly degraded due to combined environmental effects.

• Asia pacific journal of information systems
• /
• 제29권3호
• /
• pp.328-358
• /
• 2019

Business-to-Business electronic commerce websites are a common form of inter-organizational systems that span organizational boundaries and enables organizations to exchange information in a seamless fashion. To reap the desired benefits it is important that the website be used in the intended manner. The level and extent of use of a business-to-business website depends partly on the inclination to use the website by the users in the primary organization and in the user organizations independently and the combined inclination of the organizations together. This combined inclination is referred to as the System Inclination, with dominance playing a key role. Each organization has certain characteristics of its own and may differ significantly in their inclination to use. It is important to analyze the factors that determine this inclination to use, so that organizations can adopt appropriate management mechanisms to control it. This paper proposes a framework to explain the organizational factors and their influence on the inclination to use a website, based on study of four Indian buyer-supplier dyads. Inclination to use is found to be influenced by factors like top management support, website characteristics, adequate support mechanisms, user group orientation towards electronic commerce and basic IT drive among the employees, at both the primary and user organizations.

• 대한가정학회지
• /
• 제37권8호
• /
• pp.43-54
• /
• 1999

This study was designed 1) to explore the adult attachment factors, 2) to investigated the individual attachment styles and combined attachment patterns for 362 wives and husbands,3) and to know the effects of the relation to marital adjustment. The inventories were KAAQ(Korean Adult Attachment Questionnare), KMAQ(Korean Marital Adjustment Questionnare), and the Socio-demographic questionnaires. The data analysis methods were frequencies, percentiles, Cronbach'${\alpha}$, Factor Analysis, and F-test. The resets were as follows; 1. 3 factors were found in adult attachment. 2. 3 styles of adult attachment(secure, anxious/ambicalent, avoidant) were found. Secure style was most frequent. Also for 9 combined attachment patters, secure pattern was found the most frequent one. 3. Marital adjustment was highest with secure attachment style, anxious/ambivalent was next , and avoidant was the lowest. About combined attachment patterns, a pair of secure style showed the highest marital adjustment, and a pair of avoidant was the lowest.

• Tuberculosis and Respiratory Diseases
• /
• 제85권2호
• /
• pp.122-136
• /
• 2022

Although chronic obstructive pulmonary disease (COPD) and interstitial lung disease (ILD) have distinct clinical features, both diseases may coexist in a patient because they share similar risk factors such as smoking, male sex, and old age. Patients with both emphysema in upper lung fields and diffuse ILD are diagnosed with combined pulmonary fibrosis and emphysema (CPFE), which causes substantial clinical deterioration. Patients with CPFE have higher mortality compared with patients who have COPD alone, but results have been inconclusive compared with patients who have idiopathic pulmonary fibrosis (IPF). Poor prognostic factors for CPFE include exacerbation, lung cancer, and pulmonary hypertension. The presence of interstitial lung abnormalities, which may be an early or mild form of ILD, is notable among patients with COPD, and is associated with poor prognosis. Various theories have been proposed regarding the pathophysiology of CPFE. Biomarker analyses have implied that this pathophysiology may be more closely associated with IPF development, rather than COPD or emphysema. Patients with CPFE should be advised to quit smoking and undergo routine lung function tests, and pulmonary rehabilitation may be helpful. Various pharmacologic agents and surgical approaches may be beneficial in patients with CPFE, but further studies are needed.

• 대한지역사회영양학회지
• /
• 제17권3호
• /
• pp.329-340
• /
• 2012

Hypertension is a well-known risk factor for cardiovascular disease. Previous studies have shown that changes in diet and lifestyle factors can prevent the development of hypertension, but the combined effects of these modifiable factors on hypertension are not well established. The objective of this study is to investigate associations of diet and lifestyle factors, evaluated both individually and in combination, with prevalent hypertension among Korean adults. We analyzed data obtained from the 2007-2008 Korean National Health and Nutritional Examination Survey, a nationwide cross-sectional study using a stratified, multistage probability sampling design. The associations of 12 nutrient intakes and lifestyle factors with risk of hypertension were explored using restricted cubic spline regression and logistic regression models among 6,351 adults. Total energy and several nutrients and minerals, including, calcium, vitamin A, vitamin C, and sodium, showed non-linear relationships with the risk of prevalent hypertension. In multivariate logistic regression models, dietary score, obesity and alcohol intake were independently associated with the risk of prevalent hypertension, but smoking and physical activity were not. Overall, participants whose dietary habits and lifestyle factors were all in the low-risk group had 68% lower prevalence of hypertension (OR: 0.32, 95 CI: 0.14-0.74) compared to those who were at least one in the high-risk group of any dietary or lifestyle factors. The result suggests that combined optimal lifestyle habits are strongly associated with lower prevalence of hypertension among Korean adults.

• Safety and Health at Work
• /
• 제14권3호
• /
• pp.279-286
• /
• 2023

Background: This study aimed to evaluate the association between exposure to occupational hazards and the metabolic syndrome. A secondary objective was to analyze the additive and multiplicative effects of exposure to risk factors. Methods: This retrospective cohort was based on 31,615 health examinees at the Pusan National University Yangsan Hospital in Republic of Korea from 2012-2021. Demographic and behavior-related risk factors were treated as confounding factors, whereas three physical factors, 19 organic solvents and aerosols, and 13 metals and dust were considered occupational risk factors. Time-dependent Cox regression analysis was used to calculate hazard ratios. Results: The risk of metabolic syndrome was significantly higher in night shift workers (hazard ratio = 1.45: 95% confidence interval = 1.36-1.54) and workers who were exposed to noise (1.15:1.07-1.24). Exposure to some other risk factors was also significantly associated with a higher risk of metabolic syndrome. They were dimethylformamide, acetonitrile, trichloroethylene, xylene, styrene, toluene, dichloromethane, copper, antimony, lead, copper, iron, welding fume, and manganese. Among the 28 significant pairs, 19 exhibited both positive additive and multiplicative effects. Conclusions: Exposure to single or combined occupational risk factors may increase the risk of developing metabolic syndrome. Working conditions should be monitored and improved to reduce exposure to occupational hazards and prevent the development of the metabolic syndrome.

• 대한예방한의학회지
• /
• 제13권3호
• /
• pp.19-28
• /
• 2009

Background : Recently, Medical Act was amended to encourage the induction of combined treatment between Oriental Medicine doctors and Western doctors. As yet, the information infra for combined treatment has not been studied. Objectives : This study aimed to design the architecture of information system for combined treatment of the Oriental and the Western Medicine. Methods : First, we defined the information of combined treatment through the analysis of research trends from the inside and outside of the country. Because the data compatibility is very important, the definition of information must be ahead of anything else. Second, we designed the architecture of information system based on the prior definition. Results : We classified the information for combined treatment by subject such as law, clinic, research, manpower, facilities, and education. In this paper information system examined in three aspects. First the infra layer is organized as hardware, netware, and security. Second is data warehouse layer for the storing, filtering, and extraction of data. Third is service layer which is related to data transmission. And Finally all information for combined treatment is provided through the portal system for medical consumer, political planner, and R&D researcher. Conclusion : In this paper, we studied the essential factors of combined treatment information in the view point of information system. But the detailed design and implementation of information system must be followed to effect this results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.175-177
• /
• 2005

This paper analyzes transient behavior due to switching overvoltage in 22.9kV combined distribution systems. Computer models are consisted of distribution overhead line model, underground cable model and surge-arrester model in this paper. The computer models are made by EMTP/ATPDraw simulation and Line constants are calculated by ATP_LCC. This paper analyzes the various parameters affecting. These factors include closing angle and cable length.