• 한국의류학회지
• /
• 제32권5호
• /
• pp.788-799
• /
• 2008

Since the late 20C, a lot of fashion designers have considered about new construction system in fashion. Many arguments about architectural form and construction system have being supported on enlargement of range of functionalism fashion through the consideration about new shape and combination among various any other spheres. Modular concept, which is able to divide complex construction of integration into separated basic unit and use various and liberal arrangements, is regarded alternative idea of economic construction that creates new shape and constructive beauty through the simple operation and changing combination continuously. Specially, fashion designs of Yoehlee Teng, John Ribber, and Galya Rosenfeld are estimated that they are effectively utilized architectural modular system pursuing multi-function and multi-change in fashion. Modular system utilized in fashion construction will be classified as follows: 1) layering system of Yoehlee Teng, 2) combine system of john Ribber, and 3) lego system of Galya Rosenfeld. This thesis will presents beneficial guide for simple and practical functionalism fashion design development in 21C.

• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.135-144
• /
• 1999

An yield monitoring system plays a key role in precision farming. An yield monitoring system and a DGPS were implemented to a widely used domestic combine for yield mapping of a small sized paddy field, and yield mapping algorithms were investigated in this study. The yield variation in the 0.1ha rice paddy field was measured by installing a yield flow sensor and a grain moisture sensor at the end of the clean grain elevator discharging grains into a grain tank. Yield map of the test filed was drawn in a point map and a linear interpolated map based on the result of the field test. The size of a unit yield grid in yield mapping was determined based on the combine traveling speed, effective harvesting width and data storing period. It was possible to construct the yield map of a small sized paddy field.

• Journal of Biosystems Engineering
• /
• 제7권2호
• /
• pp.36-44
• /
• 1983

Farm population was rapidly decreasing due to shift of the people from farm sector to the non-farm sector caused by the economic growth of the country. Especially, a great shortage of farm labor in busy farming period in June and October is becoming a serious problem in maintaining or promoting land productivity. The peak of labor requirement in summer is caused by rice transplanting and barley harvesting. In order to reduce the restrictions imposed on farm management by the concurrence of labor requirement and the lack of labor, the experimental study for mechanization of barley harvesting has been carried out in the fields. 1. The machines for barley harvesting were knap-sack type reapers, windrow reaper (power tiller attachment), binder and combine. The order of higher efficiency of machine for barley harvesting was combine, binder, windrow reaper (WR), knapsack type reaper 1(KSTR1), and knap sack type reaper 2(KSTR2; mist and duster attachment). 2. The ratio of grain loss for the manual, binder, and combine plot was about four percent of total field yield. 3. The total yield of barley in 35 days and 40 days harvesting after heading were 514 kg and 507kg per 10 ares respectively. The yield of 35 days-plot was higher than other experimental plots. 4. The lowest yield was recorded in 30 days-plot due to the large quantity of immatured grains and having lighter 1000-grain weight. The ratio of immatured grains was 2.66 percent and 1000-grain weight was 29.4 grams. 5. The total harvesting cost of the windrow reaper was 10,178 won per 10 ares. It was the lowest value compared to other machines. The next were combine, binder, KSTR1, KSTR2, and manual in sequence. As a result, the optimum time of barley harvesting for mechanization was 35-40 days after heading. Combine, binder, and windrow reaper were recommended as the suitable machines for barley harvesting in the work efficiency. However, in total harvesting cost, the windrow reaper was the most promising machine for barley harvesting.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.755-761
• /
• 2005

본 논문에서는 OFDM 방식의 문제점으로 지적되고 있는 송신단에서의 PAR 특성을 고려하여 고속 적응형 PTS 기법과 SLM 기법을 결합한 SLM-PTS 결합기법을 제안하였다. 또한, PAR 저감기법을 적용한 시스템을 평가하기 위하여 ETD-Turbo 부호를 사용한 COFDM 시스템을 구성한 후 성능을 평가하였다. 분석 결과 제안된 SLM-PTS 기법이 연산량을 경감시키며 전반적으로 우수한 PAR 저감성능을 보임을 알 수 있었다. 특히 Combine 3의 경우 10-5 BER을 기준으로 약 $3.7\~3.9\;dB$ 정토의 개선된 PAR 성능을 보였다. 또한, 터보부호를 사용한 경우 전반적으로 우수한 PAR 성능을 보임을 알 수 있었고, ETD-Turbo 부호를 적응한 경우 추가적으로 약 0.5 dB 정도의 성능 개선효과가 있음을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1115-1118
• /
• 2003

A great part of flint fuel is Hydrogen and carbon's combination. they should be generated steam and carbon gas when combine with oxygen for perfect combustion in the inside of engine, but the pollutive material especially NOx and Soot are exhausted, even though fuel is combine perfectly. In this paper the characteristics of exhaust material from diesel engine is investigated for the corona discharge-EGR hybrid plasma reactor, which combined corona discharge with EGR system. NOx is decreased in all load and applied voltage to plasma reactor. However Soot is increased as increasing EGR rate and it is decreased as increasing applied voltage.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.239-247
• /
• 1991

This study was conducted to investigate the feasbility of continuously variable V-belt transmission(CVVT) as automatic power transmission system of combine harvesters. An experimental set-up for testing the performance of CVVT and the automatic transmission system was designed and used to analyze the power transmission characteristics of CVVT. The transmission efficiency of CVVT was increased logarithmically with increase of the load of driven shaft, but was not affected by the speed ratios of transmission. More than 80% of transmission efficiency was obtained in the 25N-m load and more of driven-shaft, and the maximum efficiency was 88~91%. When rapid speed change of the CVVT was attempted, the speed of driven shaft was stabilized within about 0.4 seconds after shift operation in both cases of increasing and decreasing of the speed.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 춘계학술발표 논문집
• /
• pp.171-175
• /
• 1998

This work presents an estimation for stress status using biosignal and fuzzy theory. Stress is estimated by 'coin-build' experiment with two type, relax and stress status. The estimator uses five biosignals, fuzzy logic to combine these signals and physiological knowledge. The system was tested in 10 records of healthy indivisuals and acheived a template of a stress progress. This work presents an estimation for stress status using biosignal and fuzzy theory. Stress is estimated by 'coin-build' experiment with two type, relax and stress status. The estimator uses five biosignals, fuzzy logic to combine these signals and physiological knowledge. The system was tested in 10 records of healthy indivisuals and acheived a template of a stress progress.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2001년도 동계 학술대회 논문집
• /
• pp.413-419
• /
• 2001

• 한국컴퓨터정보학회논문지
• /
• 제15권8호
• /
• pp.1-11
• /
• 2010

데이터스트림 관리시스템(DSMS)의 많은 응용분야에서는 단순한 실시간 스트림 데이터의 효율적인 처리뿐만 아니라 기존의 DBMS와 결합하여 데이터마이닝이나 데이터웨어하우징 같은 고급 서비스를 사용자에게 제공하는 것을 요구하고 있다. 본 논문에서는 고급 서비스를 위하여 DSMS와 DBMS를 결합한 시스템의 성능평가를 위한 도구를 개발하였다. 기존 연구 개발된 대표적인 DSMS와 DBMS를 결합하여 네트워크 모니터링 스트림 데이터를 기반으로 통합된 시스템의 성능평가를 수행하였다. 통합된 시스템의 평가를 위하여 JAVA로 통합 시스템 성능 평가 툴을 개발하였으며, 개발 된 툴을 이용하여 DSMS(STREAM, Coral8)와 DBMS(MySQL, Oracle10g)를 결합한 시스템의 성능평가를 수행하였다

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.286-289
• /
• 2002

This paper proposes wireless fan system as noise measurement system. It is easy to combine measurement system(Hardware) and analytic system(software) to the Wireless tan system. Thus wireless fan system can be applied to noise mapping system and noise monitoring system. This paper show noise measurement experiment and result using wireless lan system.