• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.76-81
• /
• 2011

This study was carried out in order to develop a speciality functional coated paper, which can be recognized under a ultraviolet lamp. The special fluorescent whitening agent (FWA) which absorbs ultraviolet light (397~410 nm) and emits it as yellowish light (570~500nm) was used. The special FWA was applied in a coating color in two ways: (1) direct application to a coating color as a FWA; (2) application on pigment surface, drying it and application it as a fluorescence whitening pigments (colored pigments). The effects of the special FWA on coating color properties were tested and the distribution of colored pigments in coated paper was evaluated under a ultraviolet lamp. The results showed that the colored pigments didn't affect on coating color properties. Experimental results showed the possibility of producing a security coated paper using the special FWA. To produce a speciality functional paper, it was found to be proper to apply the special FWA in the form of colored pigment.

• The Korean Journal of Mycology
• /
• v.24 no.3 s.78
• /
• pp.167-175
• /
• 1996

The objective of this research was to determine the effect of light quality on formation of fruit body primordia (FBPs) of Ganoderma lucidum. To achieve this 5 isolates of the fungus that develops fruit body primordia on nutrient agar media were incubated with or without continuous irradiation. The fluorescent lamps used different colors such as black light blue (BLB), pure blue (P-B), pure green (P-G), pure yellow (P-Y) and pure red (P-R). Effect of periodic light and dark exposures on FBP formation of isolate Gl-009 was investigated. The FBP formation in G. lucidum isolates was also tested under monochromatic light produced by the combination of interference filters and colored glass filters. Three isolates produced FBPs under all kinds of fluorescent lamps, whereas two induced FBPs only under visible light except for BLB fluorescent lamp. However, these isolate did not form FBPs in the dark. The FBP was formed at light intensity from 0.05 to $10.0\;{\mu}mol\;m^{-2}s^{-1}$, and begun to reduce its number as light intensity increase over $0.5\;{\mu}mol\;m^{-2}s^{-1}$. When the isolate was incubated under periodic light and dark exposures, the number and weight of FBP increased as compared with those under continuous light. Initiation of FBP requires at least 4 days of light illumination. Although isolate Gl-003 produced FBPs in a wide range of 400 to 800 nm, other four isolates had two effective regions 400 to 500 nm and 700 to 750 nm in FBP formation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.108-112
• /
• 2007

Cubic Zirconia single crystals having changeable color with light source were grown by skull melting method. Strong absorption of yellow color region light by Co and Nd and the absorption in violet color region by Fe led the color change from blue-green to red-purple with the light source from fluorescent to incandescent lamp. Color of crystals varied not only by the dopants but yttria contents and the conditions far heat treatment.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.136-141
• /
• 2012

Objectives: The objective of this study was to investigate whether the ammonia nitrogen concentration of aqueous samples such as drinking water can be determined by measuring the saturation of the samples colored by indophenol method. Methods: A color saturation measurement system was constructed by connecting a notebook computer to an image acquisition device composed of a PC camera and a light source, and was then used to measure the saturation of samples colored by blue indophenol complex. Results: Between two available light sources, a fluorescent lamp was selected due to its demonstrating better linearity between color saturation and ammonia nitrogen concentration. Prediction by quadratic regression was more accurate than by linear regression, and prediction by quadratic regression in the concentration range of 0.1-1.0 $mg/l$ was more accurate than in the concentration range of 0.0-1.0 $mg/l$. Regression-based predictions over 0.25 $mg/l$, 0.55 $mg/l$ and 0.75 $mg/l$ concentrations were implemented both by spectrophotometric method and by measuring color saturation. In the case of 0.25 $mg/l$, the predicted concentration by spectrophotometric method was $0.256{\pm}0.0076\;mg/l$ and the predicted concentration by measuring color saturation was $0.246{\pm}0.0086\;mg/l$ (p=0.051). In the case of 0.55 $mg/l$, they were $0.561{\pm}0.0068\;mg/l$ and $0.564{\pm}0.0166\;mg/l$ (p=0.660). In the case of 0.75 $mg/l$, they were $0.755{\pm}0.0139\;mg/l$ and $0.762{\pm}0.0088\;mg/l$ (p=0.215). Conclusions: There were no statistically significant differences (p>0.05) between the data from the two methods in all three of the concentrations. Therefore, the color saturation measurement method proposed in this paper may be considered applicable for determining the ammonia nitrogen concentration of aqueous samples such as drinking water.