• 복식문화연구
• /
• 제26권5호
• /
• pp.754-763
• /
• 2018

This study examined the color reproducibility and color fastness of digital textile printing for nylon sublimation transfer. After measuring the temperature and time suited to nylon sublimation transfer, the researchers conducted various tests for comparison and analysis including polyester transfer paper on polyester fabric to check dyeing characteristics, color change, sharpness, and the rubbing fastness of the dyeing samples for nylon sublimation transfer. These tests produced the following results. At $185^{\circ}C$ and $187^{\circ}C$, the sublimation transfer dyeing characteristics of nylon were similar to those of polyester and the researchers even observed superior color development in some colors; at a low temperature of $180^{\circ}C$, the sample that was worked on had the lowest level of color development. The examination of color difference (${\Delta}E$), which compared $L^*a^*b^*$ values, showed that the ${\Delta}E$ value of magenta was 10.34, that of yellow was 24.70, and that of black was 15.28. These results highlight the important role of heat treatment temperature and time on color development in nylon sublimation transfer. Concerning sharpness, the samples subjected to higher temperature heat treatment exhibited fewer color spreading phenomena around lines. Thus, dyeing properties and fastness can be enhanced by elongating time at low temperatures and shortening time at high temperatures; however, considering production time constraints as well as the need to produce industrially marketable quantities, the findings of this study suggest that the heat treatment temperature most suitable for nylon sublimation transfer is $187^{\circ}C$ for a duration of 50 seconds.

• 패션비즈니스
• /
• 제20권1호
• /
• pp.98-114
• /
• 2016

This research study was performed to compare between Korean traditional color and digital transfer textile printing. This would help to find the new direction to apply Korean traditional colors to modern textile industry. The objective of this study is to digitalize Korean traditional colors to be applied to modern textiles, based on research studies by previous researchers, on the actualization of Korean traditional colors for textiles. The study focused on 21 red colors among others. Digital color palette of graphic program was printed on 6 different polyester textiles by using digital transfer textile printing. Different things to be supplemented were found by comparing the results with the colors of Korean traditional standard color names. After measuring the colors, Munsell color system and CIE $L^*a^*b^*$ value were measured then comparative study was performed on the measured values using 3D graphs. Measured colors of Munsell varied by color but in overall, chroma became low while brightness became high. Color characteristic of warm colors got weakened by turning into cold colors as brightness got high but yellow and red got low due to the characteristics of CIE $L^*a^*b^*$ value. This study has limitations with color analysis of digital transfer textile printing due to standardization of textiles and standardization of traditional colors however it can support to actualize the colors for the design using traditional color names by visualizing the color change of digital transfer textile printing in the future.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• 대한전자공학회논문지SP
• /
• 제49권3호
• /
• pp.67-73
• /
• 2012

지역적인 영상의 색변환이란 영상에서 특정 색을 포함하는 영역을 추정하고 이를 원하는 색으로 변환시키는 것이다. 기존방법에서는 색차만을 이용해서 바꾸고자 하는 색을 포함하는 영역을 추정하고 이를 변환하였다. 따라서 변환되는 색 주변에서 원하지 않는 색결점(color artifact)이 나타나게 되었다. 제안한 방법에서는 이러한 색결점을 줄이기 위해 컬러 카테고리 맵과 수정된 color influence map을 결합한 지역적인 색변환 방법을 제안하였다. 컬러 카테고리 맵은 모든 색을 사람의 인지를 기반으로 11가지의 컬러 카테고리로 나눈 것으로서, 컬러 정보만을 이용해서 먼저 바꾸고자하는 색을 포함한 입력 영상의 지역 영역을 대략적으로 추정한다. 다음으로, 수정된 color influence map을 이용하여 인접한 영역의 색을 고려한 색변환 정도를 계산한다. 기존의 방법처럼 단순히 동일한 가중치를 주는 색차보다는 밝기와 색도에 서로 다른 가중치를 주어 수정된 color influence map을 계산하였다. 마지막으로 각각의 컬러 카테고리 맵과 수정된 color influence map에 가중치를 결합하여 지역적인 영상의 색변환을 수행하였다. 실험을 통해 제안한 방법과 기존의 색변환 방법의 결과 영상을 비교해 보았으며, 제안한 방법에서 색결점이 적게 나타나는 것을 확인할 수 있다.

• 한국멀티미디어학회논문지
• /
• 제12권5호
• /
• pp.633-643
• /
• 2009

본 논문에서는 다양한 색상을 가지는 입력 영상의 화질올 잘 유지하면서, 객체들 간 시각적인 차이를 뚜렷하게 표현하기 위해 색의대비 기반 템플릿을 이용하는 색상 변환 알고리즘을 제안한다. 이 방법은 CIE $L^{\ast}a^{\ast}b^{\ast}$색상 공간 중 유채색의 $a^{\ast}b^{\ast}$평면상에 분포된 입력 영상파 템플릿의 색상 데이터를 이용한다. 템플릿은 색상간의 대비효과를 고려하여 만들어지며, 사용자가 임의로 지정한 가준 색상들을 기반한 그라데이션 영상의 색상 분포를 표시하는 칙선 또는 곡선의 형태를 가진다. 또한, 만들어진 템플릿을 스플라인 곡선으로 모델링하고, 모텔링된 곡선의 제어점을 변형함으로써 간단하게 다른 기준 색상을 가지는, 새로운 탱플릿을 만들 수도 있다. 탬플릿을 이용한 색상 변환은 회귀분석과 칼라 매칭을 통해 이루어지며, 입력 영상의 색상분포를 템플릿의 색상 분포와 유사하게 변형함으로써 입력 영상의 색상 일관성올 유지하였다.

• 전자공학회논문지CI
• /
• 제45권3호
• /
• pp.149-159
• /
• 2008

참조 영상을 이용하여 영상의 분위기를 전환하고자 할 때, 영상의 분위기에 영향을 주는 요소 중 하나인 색을 이용하여 영상이 가지는 분위기를 변환한다. 색을 변환할 때, 국부적인 색상의 특징을 반영하기 위해 입력 영상의 화소에 대하여 색인을 하는데 낮은 채도 상에서는 색상의 식별력 저하로 인해 부적절한 색인의 색상 항목으로 색인이 되는 문제가 발생한다. 따라서 본 논문에서는 유채색과 무채색을 분리하여 처리함으로써, 낮은 채도 상에서의 잘못된 색인이 일어나지 않도록 제한하는 기법을 제안한다. 제안하는 기법은 채도의 문턱치를 이용하여 유채색과 무채색을 구분하는 단계, 구분된 화소들을 실린드리컬 거리(Cylindrical metric)를 이용하여 11가지 색상 항목(Index color)으로 색인을 하는 단계, 각 색상 항목의 우선순위 결정하고 평균과 표준편차를 구하는 단계, 마지막으로 Lab 색 공간에서 색을 변환하고 영상의 잡음과 의사 윤곽선(pseudo-contour)을 제거하기 위한 후처리 단계의 4단계로 구성된다. 실험결과를 통해 제안하는 기법은 낮은 채도 상에서도 유채색과 무채색이 잘 분리되어 색인이 되었으며 원본 영상의 색이 참조 영상의 색으로 자연스럽게 변환된 결과를 얻을 수 있음을 확인하였다.

• 한국광학회지
• /
• 제16권1호
• /
• pp.63-70
• /
• 2005

컬러 LCD(liquid crystal display) 모니터의 광학적 상에 대한 성능을 평가하기 위하여 LCD 모니터를 포함한 모든 광학계의 파장별 공간주파수 반응에 가중치를 부여한 진폭전달함수(modulation transfer function ; MTF)를 이용한 다색광전달함수(polychromatic modulation transfer function ; PMTF)를 제안한다. 서로 다른 진폭들을 갖는 적색(R), 녹색(G), 청색(B)의 3개의 막대형 LCD 단위물체를 이용한 컬러 LCD의 PMTF의 시뮬레이션 결과와 실험적 결과가 잘 일치하며, 이 결과 컬러 LCD의 결상성능은 단색으로 측정하는 MTF 및 가시광의 전파장대를 사용하는 백색광 MTF와는 다른 R, G, B의 3색에 대한 PMTF로 측정하늘 것이 보다 적절하다.

• 한국전기전자재료학회논문지
• /
• 제23권1호
• /
• pp.38-41
• /
• 2010

Compared to conventional molding technology, the color uniformity of light direction emitted from LED is improved with PCB type lead frame technology in which metal thin film is used and transfer molding technology which makes the density of phosphor uniform by manufacturing high density LED lamp. The light efficiency and the color uniformity of the LED are improved by molding the phosphor layer outside of chip and controlling the thickness of the phosphor layer. CIE x,y difference of LED in major axis is also improved uniformly from 0 to 90 degrees.

• 한국의상디자인학회지
• /
• 제19권2호
• /
• pp.39-48
• /
• 2017

Transfer printing is a method to combine printing and dyeing technology by the use of sublimation. It is an environmentally-friendly printing method that saves costs, reduces the production processes by the omission of the washing process, and saves time by maintaining quality. Due to the development of transfer printing, a high value added printing technology is available now but color fastness to sublimation of the printing products is still low since there are few dyes that have an affinity to the fabrics and the application technology is still inadequate. Specially, in case of high concentration black dyes, eco-label type black dyes, which is a substitution for general dispersal dyes, have been developed while general dispersal black dyes are still used, creating issues such as color differences on the surface and back side of the fabrics and contamination by friction after transfer printing. There are also some restricted substances such as allergens. To address these issues, high concentration black dyes and application technology that are environmentally-friendly and that have over 16 K/S through the use of single dyes with excellent color fastness, fixation ability, and similar melting temperature were developed for this study.

• 패션비즈니스
• /
• 제13권6호
• /
• pp.89-98
• /
• 2009

Computer development and new printing technology allow us to express a new type of digital textile designs those were not possible in the past. In this study, watercolor overlaying effect of various colors was tried using airbrush tool in Photoshop program. Photoshop program is a powerful graphic tool and can be used in textile design area to generate various types of designs. Woven texture was also applied to the design to give yarn dyed effects or rich appearance. Photoshop program was also used to develop woven texture without the help of the professional textile CAD. Photoshop channels enables the designers to apply various textures to the image. Plain weave and houndstooth were applied in this study. Colorways of the developed designs having watercolor effect and woven texture by applying Photoshop color adjustment function. Quick and simultaneous changes of colors were possible using this method. The developed textile designs were printed by transfer DTP. Successful textile design prints were expressed and showed watercolor overlaying effect and woven texture. The printed textiles show a little brighter color, and therefore, sample printing is recommendable in case of color sensitive production.