• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.428-428
• /
• 2013

Red color light emitting diodes were fabricated using CdSe/CdS/ZnS quantum dots (QDs). Patterned indium-tin-oxide (ITO) was used as a transparent anode, and oxygen plasma treatment on a surface of ITO was performed. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was spin coated on the ITO surface as a hole injection layer. Then CdSe/CdS/ZnS QDs was spin coated and thermal treatment was performed for the cross-linking of QDs. TiO2 was coated on the QDs as an electron transport layer, and 150 nm of aluminum cathode was formed using thermal evaporator and shadow mask. The device shows a pure red color emission at 606 nm wavelength. Device characteristics will be presented in detail.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.165-171
• /
• 2013

A new monoazo violet dye optimized for polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers was synthesized and its dyeability was investigated. Two hexyl groups were introduced to coupler, 2,5-dimethoxyaniline, in order to increase hydrophobicity of the dye. The maximum absorption wavelength was appeared at 580nm, which meant that the dye showed violet color. From the dyeing results at various conditions, the optimum dyeing was determined as $130^{\circ}C$ for 1 hour with 5% owf of dyes. The good fastness ratings to washing, rubbing were obtained showing at least 4 for both fibers. Light fastness was acceptable for polypropylene fibers giving ratings 3~4. However, relatively poor light fastness was obtained in case of ultra high molecular weight polyethylene fibers showing ratings 2.

• Applied Biological Chemistry
• /
• v.4
• /
• pp.23-28
• /
• 1963

Various species of the genus Capsicum contain in their fruits an intensively sharp and pungent substance, Capsaicin, which was first isolated in an almost pure state by Thresh. Containing the pungent principle, Capsicums are used extensively in food as a spice and in medicine as a rubefacient and carminative. Numerous methods have been proposed for the isolation, the chemical structure and the quantitative determination of Capsaicin. Modifying the several methods described before, the Capsaicin contents in various species of the genus Capsicum were determined as follows. (1) The isolation of pure Capsaicin was the essential first step for the determination of Capsaicin contents. Powdered cayenne pepper was extracted with acetone. By the method of ether alkali partition extraction slightly modified at this laboratory and by the recrystallization with light petroleum ether that was repeated ten times, the pure crystalline Capsaicin was obtained. Using this Capsaicin, the standard absorption curve was drawn with Beckman spectrophotometer model DU for the quantitative determination of Capsaicin. 92) The powdered sample was extracted in a Soxhlet extractor with ether-acetone solvent system(3:1) for 25 hours. Capsaicin in this ether-acetone extracts was efficiently separated in a pure state by paper partition chromatography using 58% methanol solution as developing agent. It was found that 58% methanol was one of the most valuable solvent to separate Capsaicin from impurities such as sterols, fatty acids, waxes and carotenoid pigments. (3) The colorimetric method modifying the Schulte-Kruger's method which consists of measuring the red color produced with diazobenzenesulphonic acid was used. Capsaicin in various species of the genus Capsicum was determined quantitatively with use of Beckman spectrophotometer model DU at $480\;m{\mu}$.

• Journal of Fashion Business
• /
• v.5 no.2
• /
• pp.149-166
• /
• 2001

The purpose of this study was illumination of the stage costume by applying the study of a subject of human expression, which establishes identity of dramatic characters. This study was conducted by referring a variety of theses, an extensive national and international literature. The color symbolism that is depicted in Shakespeare‘s work manifests the transition period of old days, which was influenced by the Renaissance and the Religious Reformation. And color preferences and the meanings I attach to them in his play, definitely reveal the Middle Ages Christian way of thinking which was obsessively dominated their mind. I also determine that the color preferences and use in Elizabeth Era also distinctively separate the social status, which were also influenced by its social conditions. Besides this, colors that were depicted in Shakespeare's work also shown many similarities from Italian Commedia dell‘arte, which were in vogue all over the Europe. Customary color symbolisms which from natural color experiences were also applied in "The Tempest". "The Tempest" was presented on the first day of November in 1611 for the first time. Following this, many plays and films have been produced in foreign countries and Korea. With an analysis of "The Tempest", costume designs for Miranda and Ferdinanad were illustrated at the end. The costumes for Miranda and Ferdinand were mainly considered to express pure love and vigorous youth of two lovers, symbolizing the image of the theme love, forgiveness, and reconciliation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.54-61
• /
• 2014

Effects of artificial thermal aging on color variations of various commercial papers (fine paper, coated paper, newsprint and filter paper) were investigated. With thermal aging at $105^{\circ}C$, most of papers showed a special trend in $a^*-b^*$ plane: the $a^*$ (red-green) values of the samples were initially reduced (heading to - $a^*$ side) and after a turning point they increased to +$a^*$ side while the $b^*$(blue-yellow) values were kept increased to +$b^*$ side (yellowing of paper). Different papers had different turning points for $a^*$ value. The filter paper consisted of a pure chemical pulp and the copy paper with OBA (optical brightening agent) showed the latest turing points. In addition, the papers without OBA showed less reduction in brightness compared with that with OBA, suggesting that OBA could adversely influence the brightness stability during thermal aging.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.181-187
• /
• 2005

Alkoxy-substituted poly(spirobifluorene)s and their copolymers with a triphenylamine derivative have been synthesized by Ni(0)-mediated polymerization. The polymers were well soluble in common organic solvents. Pure blue-light emissions without the long wavelength emission of poly(fluorene)s have been observed in the fluorescence spectra of polymer thin films. The light emitting diodes with a device configuration of ITO/PEDT:PSS(30 nm)/polymer(60 nm)/LiF(1 nm)/Al(100 nm) have been fabricated. The electroluminescence spectra showed the blue emissions without the long wavelength emission as observed in the fluorescence spectra. The relatively poor electroluminescence quantum yield of the homopolymer (0.017% @ 20 $mA/cm^{2}$) with color coordinates of (0.16, 0.07) has been improved by the introduction of triphenylamine moiety, and the copolymer with derivative exhibited an electroluminescence quantum yield of 0.15 % at 20 $mA/cm^{2}$ with color coordinates of (0.16, 0.08). Moreover, the introduction of polar side chains to the spirobifluorene moiety enhanced the device performance and led to the quantum yields of 0.6 to 0.7 % at 20 $mA/cm^{2}$, although there was some expense of color purities.

• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.93-97
• /
• 2014

In this study, a cobalt sulfate ceramic coating was sintered on various clays at $1250^{\circ}C$. The specimen characteristics were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM), TG-DTA, UV-vis spectrophotometer, and HRDPM. The ceramic coating had a constant thickness of thousands ${\mu}m$, and the surface was confirmed to be densely fused. Other new compounds were produced by the cobalt sulfate sintering process and reactions. These compounds were a $CoAl_2O_4$ phase, $Co_2SiO_4$ phase, anorthite($CaAl_2Si_2O_8$) phase, and $FeAl_2O_4$ phase, respectively. UV properties of the coated specimen were investigated, celadon clay specimen in 530-550 nm band is showing a dark gray color. The white clay and white mix clay specimen in 460-500 nm band is showing a blue color. The cobalt-aluminate($CoAl_2O_4$) spinel and the cobalt-silicate olivine($Co_2SiO_4$) were the strongest of the ceramic pigments, producing a very pure, navy blue color.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.224-224
• /
• 2022

Mungbean(Vigna radiata (L.) R. Wilczek) is one of legume cultivated in south and east Asia. It well cultivated in high temperature and drought condition. In order to establish pure line for genomic studies, the agronomical characteristics of Korean mungbean landraces were evaluated. A total of 324 acessions derived from National Agrobiodiversity Center were selfed two times in 2021 nersery. Tree times of selfed from 324 accessions were characterized. The color of seed coat was divided into three groups: green, yellow and brown. Among them green color was the most common with 91.7%. Flower colors were divided into four groups: yellow, purplish yellow, greenish yellow and purplish green. Among them purplish yellow color had the highest with 77.8%. Out of 324 resources, only 4 showed compound leaves, and all resources had a heart-shaped leaf. The days to first flowering was 31 to 78 days. About 63% of the accessions bloomed 35 to 50 days after sowing. 324 Korean landraces are expected to be used as a population of the Korean mungbean core collection and serve as a basis for genomic breeding materials for mungbean.

• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.117-122
• /
• 2016

White organic light-emitting diodes with a structure of indium-tin-oxide [ITO]/N,N-diphenyl-N,N-bis-[4-(phenylm-tolvlamino)-phenyl]-biphenyl-4,4-diamine [DNTPD]/[2,3-f:2, 2-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile [HATCN]/1,1-bis(di-4-poly-aminophenyl) cyclo -hexane [TAPC]/emission layers doped with three color dopants/4,7-diphenyl-1,10-phenanthroline [Bphen]/$Cs_2CO_3$/Al were fabricated and evaluated. In the emission layer [EML], N,N-dicarbazolyl-3,5-benzene [mCP] was used as a single host and bis(2-phenyl quinolinato)-acetylacetonate iridium(III) [Ir(pq)2acac]/fac-tris(2-phenylpyridinato) iridium(III) $[Ir(ppy)_3]$/iridium(III) bis[(4,6-di-fluoropheny)-pyridinato-N,C2] picolinate [FIrpic] were used as red/green/blue dopants, respectively. The fabricated devices were divided into five types (D1, D2, D3, D4, D5) according to the structure of the emission layer. The electroluminescence spectra showed three peak emissions at the wavelengths of blue (472~473 nm), green (495~500 nm), and red (589~595 nm). Among the fabricated devices, the device of D1 doped in a mixed fashion with a single emission layer showed the highest values of luminance and quantum efficiency at the given voltage. However, the emission color of D1 was not pure white but orange, with Commission Internationale de L'Eclairage [CIE] coordinates of (x = 0.41~0.45, y = 0.41) depending on the applied voltages. On the other hand, device D5, with a double emission layer of $mCP:[Ir(pq)_2acac(3%)+Ir(ppy)_3(0.5%)]$/mCP:[FIrpic(10%)], showed a nearly pure white color with CIE coordinates of (x = 0.34~0.35, y = 0.35~0.37) under applied voltage in the range of 6~10 V. The luminance and quantum efficiency of D5 were $17,160cd/m^2$ and 3.8% at 10 V, respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.1
• /
• pp.107-114
• /
• 2003

This study aims to find methods that prevents aging of buildings paint coating and that limits defects in construction. Defects in painting can occur in four stages: pure paint, during painting, after the paint coating has dried, and after some period of time has passed after coating. Paint may become bad due to precipitation of pigments, formation of membranes, and seeding during manufacturing. Therefore, it is important that the paint is well mixed and kept airtight at a cool, dark place. Indents, paint brush strokes, orange peel, separation of colors, and paint running and spreading during the paint work process can be prevented by using high quality materials and applying a high-level of construction method. After the paint coating has dried, boiling, yellowing, poor drying, poor bonding, and/or glen deficiency may occur. These are influenced by the levels of cleanness of the dried product, drying temperature and hydration. Then, when the coating has been left dried for some period of time, cracking, peeling, scaling, swelling, discoloring, and/or rusting may develop due to the ultraviolet and contaminants in the air. Since these defects occur due to inappropriate construction schedule and/or hot and humid condition, one must use weatherproof materials. Furthermore, poor paint color may be caused by contamination in the sample plate, discoloration, and/or discrepancies in colors which are due to material differences, level of glossiness, degree of dispersion, dual color property of metallic colors, precipitation of pigments, etc. One should achieve reduction in construction cost and effectiveness in paint work by limiting contaminations in the construction site and strictly observing to construction regulations.