• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.521-529
• /
• 2022

This study evaluated the effects of agricultural reflective film and HANSPEK film on the fruit quality attributes and peel color variables of 'Fuji' apples. The reflective films were applied under the tree canopies at 20 and 30 days before harvest (DBH), and a tree with no films was used as the control. Depending on the measurement locations, the light intensity was 7.4 - 14.6% higher in the reflective film treatments than that of the control. However, no difference in the light intensity was observed between the reflective and HASPEK films. In addition, the light intensity was not also different between the 20 and 30 DBH. At harvest, the flesh firmness, fruit weight, soluble solids content, titratable acidity, and internal ethylene concentration were not different regardless of the type of reflective film and treatment time. In addition, the peel color variables were not affected in the equatorial region. However, in the calyx region, the L* and b* values were decreased, and the a* value was increased by the reflective and HANSPEK films compared with the control. Hence, the hue angle was decreased to near 0^o (red), and the peel color was improved. Therefore, this study suggests that the application of the HANSPEK film under a tree canopy could improve the fruit peel color of 'Fuji' apples.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.43-51
• /
• 1996

An appropriate lighting standard for the museum is needed to minimize the deterioration of the exhibits by the light. To obtain the basic data for the standard, a system to measure the color change of the artifacts as a function of the radiation energy frequency was constructed. Xenon lamp is used as a light source, and the light is irradiated to the samples through serveral cut-off filters. Measuring the colors of the samples under each filters, color change of the samples is estimated for each frequency ranges of radiation energy. As a result, natural dyes show severe color change in a short time, but traditional papers shows relatively small color change. Using measured results, color change due to other light sources can be calculated and this will be the base of the standard.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.24-27
• /
• 2013

In this paper, we investigated the effect of luminescence properties of various concentrations of magnesium-doped ZnS:Mn phosphor excited by plasma luminescence device. The PL intensity was evaluated in the range of 300~500 nm excitation wavelengths. We found the highest PL intensity of the phosphors excited by 365 nm and 450 nm was observed at Mg concentrations of 1.4 wt% and 0.8 wt%, respectively. In addition, an emission peak was distinguished at 580 nm wavelength. With increasing Mg dopant level, enhanced PL intensity was observed, which is possibly applicable to color converting materials by blue emission for white light sources. Finally, we evaluated the luminance properties of color converting ZnS:Mn,Mg phosphors with plasma blue light source. the white luminance of plasma light source with CIE(0.36,0.26) was established by color converting phosphors of ZnS:Mn with 0.8 wt% Mg.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.376-383
• /
• 2013

The design of the LEDs lighting in general household illumination was proposed and compared with the fluorescent lighting in this study. Using the LED as a light source would promote energy saving lighting for household illumination purposes. We used the LightTools and DIALux software to design and simulate different standards of illuminance, different correlated color temperatures and different color rendering indices for household environments. The power consumption and efficiency of traditional illuminated light sources and an LED light source with the same standard of illuminance for lighting the household environment were analyzed and compared with each other. Finally, our results show the advantages of using white-light LEDs for lighting and household illumination.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.4
• /
• pp.414-419
• /
• 2006

The purpose of this study was to measure the factor influencing tourist preferences for leaf mustard iimchi. Among 250 questionnaires, 230 questionnaires were utilized for the analysis. Frequencies, conjoint model, max. utility model, BTL model, Logit model, K-means cluster analysis, and one-way ANOVA analysis were used for this study. The findings from this study were as follows. First, the Pearson's R and Kendall's tau statistics showed that the model fitted the data well. Second, it was found that total respondents and three clusters regarded taste and price as the very important factor. Third, it was found that the first cluster most preferred product with light red color, plain package, and mild taste sold at a cheap price in factory. The second cluster most preferred product with light red color, plain package, and moderately pungent taste sold at a expensive price in factory. The third cluster most preferred product with dark red color, shaped package, and highly pungent taste sold at a cheap price in factory. Fourth, it was found that the first cluster most preferred simulation product with light red color, shaped package, and mild taste sold at a cheap price in factory. The second cluster most preferred simulation product with light red color, shaped package, and moderately pungent taste sold at a cheap price in factory. The third clutter most preferred simulation product with dark red color, shaped package, and highly pungent taste sold at a cheap price in factory.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.48-54
• /
• 2023

Nowadays, a blind man finds it very difficult to cross the roads. They should be very vigilant with every step they take. To resolve this problem, Convolutional Neural Networks(CNN) is a best method to analyse the data and automate the model without intervention of human being. In this work, a traffic signal recognition system is designed using CNN for the visually impaired. To provide a safe walking environment, a voice message is given according to light state and timer state at that instance. The developed model consists of two phases, in the first phase the CNN model is trained to classify different images captured from traffic signals. Common Objects in Context (COCO) labelled dataset is used, which includes images of different classes like traffic lights, bicycles, cars etc. The traffic light object will be detected using this labelled dataset with help of object detection model. The CNN model detects the color of the traffic light and timer displayed on the traffic image. In the second phase, from the detected color of the light and timer value a text message is generated and sent to the text-to-speech conversion model to make voice guidance for the blind person. The developed traffic light recognition model recognizes traffic light color and countdown timer displayed on the signal for safe signal crossing. The countdown timer displayed on the signal was not considered in existing models which is very useful. The proposed model has given accurate results in different scenarios when compared to other models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.47-58
• /
• 1996

An object color can be seen differently under the various outer illuminants. However, human visual system has color constnacy that the object color can be seen constantly under the different outer illuminants. When the viewer watches TV under specific that the object color can be seen constantly under the different outer illuminants. When the viewer bathes TV under specific outer illuminants, he perceives distortes color due to the emitting specturm of outer illuminants as well as the radiation of CPT itself. Namely, when the outer illuminants such as fluorescent and incandescent lamps incident on CPT, brightness, saturation, hue, itself. Namely, when the outer iluminants such as fluorescent and incandescent lamps incident on CPT, brightness, saturation, hue, and contrast on color pictures are changend, he perceives distortedcolr fromthe original color. In this paper color enhancement algorithm based on light intensity and outer light decision funtion using RGB sensor was proposed. The implemented TV of proposed algorithm has higher visual quality at the view point of human visual system and more vivid than that ofcoventional color TV.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.590-596
• /
• 2019

To improve the color gamut of a liquid-crystal display (LCD), we propose a bandpass filter that is added to the backlight unit to optimize the backlight spectrum. The bandpass filter can only transmit red, green and blue light in the visible range, while reflecting the unwanted light. We study the optical properties of the bandpass filter using the transfer-matrix method, and the effect of the bandpass filter on the color gamuts of LCDs is also investigated. When a bandpass filter based on a 5-layer configuration comprising low and high refractive indices ((HL)²H) is used in phosphor-converted white-light-emitting diode (pc-WLED), K₂SiF₆:Mn⁴⁺ (KSF-LED), and quantum-dot (QD) backlights, the color gamuts of the LCDs improve from 72% to 95.3% of NTSC, from 92% to 106.7% of NTSC, and from 104.3% to 112.2% of NTSC respectively. When the incident angle of light increases to 30°, the color gamuts of LCDs with pc-WLED and KSF-LED backlights decrease by 2.9% and 1% respectively. For the QD backlight, the color gamut almost does not change. When the (HL)²H structure is coated on the diffusion film, the color gamut can be improved to 92.6% of NTSC (pc-WLED), 105.6% of NTSC (KSF-LED), and 111.9% of NTSC (QD). The diffusion film has no obvious effect on the color gamut. The results have an important potential application in wide-color-gamut LCDs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.374-382
• /
• 2006

Purpose: This study was designed to investigate the present conditions of illumination techniques in dental clinics in order to contribute improvement of operating environment. This study also aimed exploring qualitative and quantitative luminous intensity required for color temperature in dental clinic illumination, which was a critical part of esthetic dentistry. Materials and methods: A total of forty-eight local dental clinics were selected for sampling a) luminous intensity, and b) color temperature. The author measured the luminous intensity and the color temperature with lux meter and color meter respectively between 12pm and 2pm. The dental unit chair placed in the general operation positions were kept the distance 60 cm then all dental units were measured three times and averaged. The author measured the luminous intensity and color temperature with both common dental operating light and then without operating light in different office environments. The study was conducted under three conditions: 1 artificial illumination in clear day light 2. artificial illumination in cloudy day light, and 3. artificial illumination alone. Results : The results obtained were as follows. 1. The average luminous intensity in dental clinic lighting was 425 lux which was not sufficient to produce the optimal shade of the patient's teeth. Furthermore, the average luminous intensity even in full operating lighting was 9532 lux which fell short of the required level of 10,000 lux. 2. The average color temperature of all dental clinics surveyed was 5169 K which met the optimal range. However, only 33.3% fell in the correct region between 5,000-5,500 K as 25% were over 5,500 K and 41.6% were below 5,000 K. As a result, 66.7% were under insufficient color temperature conditions. 3. The dental unit chair placed next to a window, hence exposure to natural lighting, had significantly higher luminous intensity and color temperature compared to the dental unit chair which didn't have a window or natural lighting. 4. The data analysis revealed that only 6.3% of the dental clinic were met the standard of the average luminous intensity and color temperature.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.71-77
• /
• 2000

The color of an esthetic restorative material is controlled primarily by thickness of the material and background color. Although the effects of the two factors on the color coordinates of esthetic dental materials have been reported, the mechanism has not been clarified well enough to explain the effects quantitatively. The purpose of this study was to evaluate the effect of thickness and background color on the color of tooth colored restorative materials quantitatively. One hundred sixty samples were fabricated from two commercial light-cured composite resins and two commercial compomers. The color characteristics and changes in the color coordinates were measured by a tristimulus colorimeter (Model TC-6FX, Tokyo Denshoku Co. Japan) using the CIELAB system. The results were as follows: 1. As thickness increased from 1.0 to 4.0mm, values of $L^*$ $a^*$ $b^*$ changed irregulary for white and dentin color background, but showed no obvious difference in color for black background. 2. The colors of composite resins and compomers were significantly influenced by background color. 3. The color difference was recognized even the same shade name in four representative kinds of composite resins and compomers. 4. As thickness changed, values of color difference for same products and same background color showed constancy, but showed difference for different background color.