• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.178-183
• /
• 2005

This study was done to evaluate whether vital bleaching agents could influence on the translucency of the bovine enamel. The anterior bovine teeth that were extracted one day before and without any gross discoloration were obtained and then were preserved in physiologic saline. 6 mm cylindrical tooth specimens were fabricated with diamond puncher perpendicularly on labial surface of bovine tooth. After embedded in transparent acrylic resin with labial surface being exposed, they were cut to a thickness of 1.2 mm with low speed diamond saw (Isomat, Buehler Co., Lake Bluff, IL, USA). They were smoothly ground to 1 mm thickness of enamel with sandpaper. 24 specimens were randomly divided into 3 groups and control group respectively. Opalescence (10% carbamide peroxide, Ultradent, South Jordan, USA), Rembrandt (10% carbamide peroxide, DenMat, USA) and Opalescence F (15% carbamide peroxide with fluoride, Ultradent, USA) were applied on labial sides of the bovine enamel for 7 days (bleaching agents were reapplied every 24 hours) and the opposite surface was contacted to cotton that soaked in distilled water. The control group was soaked in distilled water. Three stimulus value X, Y and Z were evaluated with colorimeter (Color ' Color Differencerneter, Model TC-6FX, Tokyo Denshoku Co., Japan) on the labial surface of all specimen three times on white and black background plate before the bleaching agents were applied and on 3rd, 5th and 7th day after applied. The degree of translucency was normally assessed by measuring the inverse property, opacity (contrast ratio). 10% Opalescence, 15% Opalescence-F, and control group showed no significant variation in the translucency of bovine enamel, However Rembrandt decreased the translucency of it (p < 0.01).

• Journal of dental hygiene science
• /
• v.22 no.1
• /
• pp.57-66
• /
• 2022

Background: This study aimed to investigate the effect of selecting commercially available blending teas and applying them to bovine teeth on color change over time. Methods: After selecting healthy bovine teeth, using a cutting-disc, 105 specimens with a dimension of 5×5×3 mm were prepared, and 15 specimens were distributed to each group. Black tea was used as a positive control, water was used as a negative control, and blended tea of five types was used as an experimental group. First, pH and buffering capacity were measured with a pH meter, and tooth color was determined using a spectrophotometer before immersion in the blending tea solution and 1, 5, 7, 14, and 21 days after immersion. Thereafter, the shape change of the enamel surface was observed using a scanning electron microscope, and SPSS ver.26 was used to analyze the color change. Results: The average pH of the five blending teas in the experimental group was 3.78, and the pH of group 3 (strawberry rhubarb) was the lowest at 3.22. The pH levels of black tea and water were 5.19 and 7.30, respectively. The buffering capacity was the highest in group 3 at both pH levels of 5.5 and 7.0. The L^*a^*b^* color change according to immersion time was the largest in group 4 (rooibos yellow flower), and the amount of color change was large in black tea and group 4. As a result of observing the enamel surface of bovine teeth, changes in the surface shape were noted in all groups immersed in the experimental solution for 21 days, except for water. Conclusion: There was a significant difference between the experimental groups in terms of color change according to the immersion time, and color and enamel surface changes were observed in black tea and all experimental groups, except for water.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.245-252
• /
• 2018

Objective: We aimed to perform in-vitro evaluation to compare 1) shear bond strength (SBS), adhesive remnant index (ARI), and color change between self-etched and acid-etched primers; 2) the SBS, ARI and color change between direct and indirect bonding; and 3) the enamel roughness (ER) between 12-blade bur and aluminum oxide polisher debonding methods. Methods: Seventy bovine incisors were distributed in seven groups: control (no bonding), direct (DTBX), and 5 indirect bonding (ITBX, IZ350, ISONDHI, ISEP, and ITBXp). Transbond XT Primer was used in the DTBX, ITBX, and ITBXp groups, flow resin Z350 in the IZ350 group, Sondhi in the ISONDHI group, and SEP primer in the ISEP group. SBS, ARI, and ER were evaluated. The adhesive remnant was removed using a low-speed tungsten bur in all groups except the ITBXp, in which an aluminum oxide polisher was used. After coffee staining, color evaluations were performed using a spectrophotometer immediately after staining and prior to bonding. Results: ISONDHI and ISEP showed significantly lower SBS (p < 0.01). DTBX had a greater number of teeth with all the adhesive on the enamel (70%), compared with the indirect bonding groups (0-30%). The ER in the ITBX and ITBXp groups was found to be greater because of both clean-up techniques used. Conclusions: Direct and indirect bonding have similar results and all the primers used show satisfactory adhesion strength. Use of burs and polishers increases the ER, but polishers ensure greater integrity of the initial roughness. Resin tags do not change the color of the teeth.

• Journal of dental hygiene science
• /
• v.10 no.2
• /
• pp.95-100
• /
• 2010

The purposes of this study were to examine the effect of different fluoridated bleaching solution on the changes in physical and chemical characteristics of tooth. Forty-eight bovine incisors were divided into four groups to receive bleaching treatments, over a 14days period, as follows: no treatment; 10% carbamide peroxide (CP) bleaching; 10% CP containing 0.05% fluoride; and 10% CP containing 0.1% fluoride. All the specimens were highly polished and discolored with commercial COCK.Color and enamel changes were determined with colorimeter, microhardness tester, scanning electron microscope, atomic force microscopy. All the collected data were analyzed with one-way ANOVA. After the bleaching, bleached groups showed the color change(E*). Microhardness of 10% CP group decreased after tooth bleaching. But microhardness of containing fluoride bleached groups increased after tooth bleaching. Enamel surface of 10% CP bleached group showed any apparent morphology and roughness changes compared to the enamel which was stored in distilled water only. These results demonstrated that Fluoridated 10% Carbamide Peroxide have appreciable bleaching effect on bovine teeth and were not adversely affects enamel. Supporting influence of fluoride-containing bleaching solution on remineralization could be observed and further research must be carried out in various active environments to confirm these results clinically.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.20-28
• /
• 2023

Background: This study aimed to determine the effect of ramen sauce on tooth tone changes over time, after selecting three different ramen colors from the ramens sold in the market, and applying the sauce to bovine teeth. Methods: Healthy bovine teeth were selected, and cutting discs were used to produce 60 specimens (5× 5× 3 mm), with 15 specimens distributed per county. Three types of ramen (buldak, chacharoni black bean sauce, and ottogi curry noodle) were used as the experimental group, and water was used as the negative control group. Tooth tone measurement was performed using a spectrophotometer (CM-700d) to measure the color before and after 1 (3 h 44 min), 2 (7 h 28 min), 3 (11 h 12 min), and 4 weeks (14 h 56 min). Analysis of the color tone change was performed using Statistical Package for the Social Sciences version 28. Results: In the experimental group, there was a significant color tone change before and after immersion. L^* indicated the largest change in black bean sauce ramen, a^* indicated buldak ramen, and b^* indicated the largest change in curry ramen. The amount of color change (∆E^*) was the largest in curry ramen, followed by buldak and black bean sauce ramens. The results of the post-hoc analysis showed significant differences between all groups except buldak and black bean sauce ramens. Conclusion: All three types of ramen revealed significant color change before and after immersion, and curry ramen showed the largest amount of color change among them.

• Journal of dental hygiene science
• /
• v.9 no.5
• /
• pp.525-530
• /
• 2009

The purpose of this study was to evaluate color change and enamel surface changes using the plasma arc light source during tooth bleaching treatments. Twenty-four extracted bovine incisors were selected and embedded in the resin blocks. All the specimens were highly polished and discolored with commercial $COCK^{(R)}$. High concentration carbamide peroxide with and without plasma arc were used for bleaching. Specimens were bleached for 1 hour per week during 3 weeks. Color and enamel surface changes were determined with colorimeter (TC-8600A), microhardness tester(MXT-a7), scanning electron microscope(S-4200). All the collected data analyzed with paired t-test, t-test and one-way ANOVA. After the bleaching, both groups showed the color changes(${\Delta}E^*$). Microhardness of two group decreased after tooth bleaching. The SEM evaluation of enamel surface of both group showed a similar morphology of decalcification after tooth bleaching. Office bleaching using the plasma arc application with 35% carbamide peroxide can increase the color change. Office bleaching using the high concentration of carbamide peroxide and plasma arc also detract the outer surface of enamel. It is recommended that careful procedures are needed during office bleaching with high concentration of carbamide peroxide and light source.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.377-383
• /
• 2018

Objective: This study was performed to investigate the effects of external tooth bleaching with flouridation on the appearance of white spot lesions (WSLs) in vitro. Methods: In total, 125 bracket-bonded bovine incisor enamel blocks with artificial WSLs were randomly divided into a control group and four treatment groups (home bleaching, home bleaching + fluoridation, in-office bleaching, and in-office bleaching + fluoridation). A spectroradiometer (SR) and digital images (DIs) were used to evaluate colorimetric parameters (Commission Internationale l'Eclairage $L^*a^*b^*$) for all specimens. Color measurements were obtained before WSL formation (T1), after WSL formation (T2), and after completion of the external tooth bleaching treatment (T3). Results: The SRbased color change after bleaching was significantly greater in the treatment groups than in the control group (p < 0.05). SR-based lightness ($L^*$) and redgreen ($a^*$) values were significantly higher at T2 than at T1 (p < 0.001), with no significant changes in yellow-blue ($b^*$) values. At T3, SR-based $L^*$ values had increased while $a^*$ and $b^*$ values had decreased in the treatment groups (p < 0.001). The DI-based color difference between the sound enamel and WSL areas (DE*DI) increased significantly from T1 to T2 in all groups (p < 0.001) and significantly decreased from T2 to T3 in the treatment groups (p < 0.001). No significant differences in ${\Delta}E^*DI$ at T3 were shown between the four treatment groups (p > 0.05). Conclusions: The findings of this study suggested that external tooth bleaching with fluoridation can alleviate the conspicuity of WSLs.

• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.375-380
• /
• 2011

This study evaluated whether fluoride treatment can affect recovery of the irregularity of enamel surface after tooth whitening with a high concentration of hydrogen peroxide (HP) activated by plasma arc light. A total of 36 bovine teeth stained with coke were used in this experiment. The specimens were classified into following three groups (two different commercial plasma arc groups and a control group without light curing source): (1) 35% HP gel only, (2): 35% HP gel and Plasma arc A, and (3) 35% HP gel and Plasma arc B. To measure color changes and surface morphologies before and after the bleaching, colorimeter and scanning electron microscopy were used, respectively. When the specimens were bleached with hydrogen peroxide and plasma arc lights, the bleaching effect was greater than when only hydrogen peroxide gels were used (Kruskal-Wallis test, p<0.05). In addition, plasma arc B showed the more color changes than plasma arc A (Bonferroni post-hoc test, p<0.05). The surfaces of the teeth treated with fluoride gel after the whitening treatment came to be smooth. Therefore, the results of this study suggested that the fluoride application for patients who got tooth whitening therapy with a high concentration of hydrogen peroxide gels activated by plasma arc light will be effective to recover rough enamel surfaces.

• Journal of dental hygiene science
• /
• v.20 no.4
• /
• pp.252-260
• /
• 2020

Background: In this study, the bleaching effect and surface damage of two types of over-the-counter home tooth bleaching agents were explored using an in vitro study of bleaching agents applied to bovine teeth specimens for 14 days. Methods: Domestic over-the-counter home tooth bleaching agents of gel and patch form that shared common active ingredients and manufacturers were selected and tested. The experiment specimens were made using composite resin with bovine tooth samples and then measured the initial microhardness. Specimens were then divided into a Gel group and a Patch group and underwent bleaching treatment once a day for two weeks for 30 to 60 minutes (recommended) or 7 hours. All specimens were coffee-stained prior to bleaching. The bleaching effect was measured using a spectrophotometer and surface damage was measured using a microhardness meter. Results: The difference in color following the bleaching procedure was positive in both the Gel and Patch group, although there were no statistically significant differences in bleaching effect between groups. There was no significant difference in bleaching effect based on duration. The microhardness test revealed that both the Gel group and the Patch group had surface damage after bleaching. The greatest surface damage was found in the Patch group that had undergone a 7-hour bleaching treatment, although the differences were not statistically significant. Conclusion: The bleaching effect of the home tooth bleaching agent was visible to the naked eye. However, longer applications than recommended did not result in greater bleaching, unlike consumers' expectations, and instead increased the chance of enamel damage. As such, there is a need for consumers to be alert and adhere to recommendations provided by each company.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.1-10
• /
• 2017

The present study aimed to evaluate the validity of resin infiltration in improving color stability after tooth whitening. Enamel samples were extracted from 40 healthy bovine upper incisors, and primary staining and whitening were performed. After that, specimens were randomly divided into 3 groups : resin infiltration group (n = 15, RI group), resin adhesive group (n = 15, RA group), and control group (n = 10). Secondary staining was performed on all samples. Coloration was assessed 5 times as follows: initial color, immediately after staining, after whitening, after resin application, and after secondary staining. Color was measured using a spectrophotometer and recorded by using the CIE $L^*a^*b^*$ color space. The color changes after primary staining for the RI, RA, and control groups were $12.16{\pm}3.50$, $12.16{\pm}3.38$, and $15.81{\pm}6.39$, whereas those after secondary staining were $15.21{\pm}7.19$, $15.93{\pm}4.31$, and $26.62{\pm}17.89$. Color changes after secondary staining showed a significant difference between the RI and control groups. In the within-group comparison between primary and secondary staining, there was no significant difference found in the RI group only (p = 0.26). The results suggest that Color stability after tooth whitening can be improved using resin infiltration.