• 한국실내디자인학회논문집
• /
• 제21권1호
• /
• pp.136-147
• /
• 2012

This study researched about gender color preference as basic data for color application of fashion shop Facade. A HUE TONE system from V(vivid) to DK(dark) was used based on 10 colors of the IRI-120 color chart, color preference according to gender was investigated through a survey on males and females of over teenage years, and it was analyzed and presented as a color matching chart. And it was suggested as a color guideline through comprehensive analysis. Few definitions can be given through the results of this study. First, the preference degree according to gender was similar but different senses were shown visually even though the same adjective expressive vocabulary of a color image was suggested. This means there is an unchanging basic conservative disposition that males and females do not have and therefore they infer different ideas according to various environments and factors. Second, females showed more sensitive response to colors than males in the gender color preference result, which confirmed the deviation of each color group that is characteristically preferred according to a category. Third, high preferred color matches according to gender were shown for each vocabulary in various senses such as similar color matching, complementary color matching, separation color matching, and accent color matching. A universal empirical theory by general sensibility was obtained as the purpose of this study. This study suggested securement of a color design planning as basic data and the extent of usability by quantitatively showing the order of priority through the survey and analysis. Thus, the results of this study will be a great help as basic data for invigoration and commercialization of a color planning for designers and users.

• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.33-41
• /
• 2004

본 논문에서는 모니터와 모바일 디스플레이간의 복잡한 색 정합 과정을 단순화시키는 3차원의 색 정합 look-up table(LUT)을 설계하였다. 색 정합을 위해서는 우선 영상의 색을 CIEXYZ 혹은 CIELAB 등의 장치 독립적인 색 공간에서 처리하여야 한다. 장치 의존적인 RGB 색 공간의 데이터에서 장치 독립적인 색 공간의 데이터를 얻기 위해서는 디스플레이 특성화 과정이 필요하다. 기존의 S-curve 모델을 이용하여 LCD를 특성화 하면 LCD의 비선형적인 계조 특성으로 인해 특성화 오차가 허용 오차보다 커지게 된다. 본 논문에서는 X, Y, Z의 전기-빛 입출력 특성을 이용하여 S-curve 모델의 특성화 오차를 줄였다. 또한 모니터와 모바일 디스플레이간의 색 정합을 수행함으로써 색 표현력이 향상된 영상을 모바일 디스플레이에서 획득할 수 있었으며, 실험을 통하여 허용오차 내의 색 정합 LUT의 최소 크기가 64(4×4×4)라는 것을 확인하였다.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• Restorative Dentistry and Endodontics
• /
• 제48권4호
• /
• pp.40.1-40.8
• /
• 2023

Objectives: The purpose of this study was to evaluate the influence of eye dominance on color perception, and shade matching. Materials and Methods: A total of 104 participants were selected for the study. There were 3 groups: Group I: 3rd and 4th year dental students and interns (n = 40); Group II: postgraduates (n = 34); Group III: senior residents and faculty members (≥ 6 years of clinical experience) (n = 30). All participants were evaluated for congenital color blindness with Ishihara plates, their dominant eye with Mile's test, and their color perception with the Farnsworth-Munsell 100 hue test. The shade guide test was used for shade matching with a second corresponding set of Vitapan classical shade guides. Results: The results of Mile's test revealed that 60.6% were right-eye dominant and 39.4% were left-eye dominant. There was a statistically significant difference among all participants between the dominant eye and the non-dominant eye in shade matching. Conclusions: The dominant eye has a positive effect on shade matching and the ability to match shades becomes better with an increase in clinical experience.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.422-429
• /
• 2018

PURPOSE. Accurate color matching of maxillofacial prostheses to skin is important for esthetics. A computerized color matching system specific to human skin has recently been developed. The purpose of this study was to evaluate the accuracy in color and translucency matching of the computerized color matching system across different skin colors. MATERIALS AND METHODS. The silicone was colored to simulate 28 different skin colors (n=5) to serve as "target skin colors". Using a spectrocolorometer (e-skin), color codes were determined for "replicate skin color" fabrication. CIELAB Delta-E between target skin color-replicate skin color pairs and translucency parameter were calculated. CIELAB Delta-E values were compared with one-way ANOVA and Tukey multiple-comparison. The agreement between $L^*$, $a^*$, $b^*$ and translucency parameter of target skin colors and replicate skin color were calculated by a two-way mixed average measures intraclass correlation coefficient. Translucency parameter of target skin color- replicate skin color pairs were compared with Paired t-test (${\alpha}=.05$). RESULTS. The mean CIELAB Delta-E value was 3.83 and significant differences were found among colors. The intraclass correlation coefficient showed excellent reliability for $L^*$, $a^*$, $b^*$ and good reliability for translucency parameter (P<.001). The mean translucency parameter of replicate skin colors was significantly higher than that of translucency parameter. CONCLUSION. The computerized color matching system specific to human skin was found to be reliable in terms of color and translucency between target skin colors and replicate skin color.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 추계학술발표회 논문집
• /
• pp.0.2-0
• /
• 2000

Most important step for the color matching in scanner is the color coordinate transformation from the scanner RGB space to device independent uniform color space. A variety of color calibration technologies have been developed for input device. Linear or nonlinear matrices have been conveniently applied to correct the color filter\`s mismatch with color matching function in scanners. The color matching accuracy is expected to be further improved when the nonlinear matrices are optimized into subdivided smaller color spaces than in single matrix of the entire color space. This article proposed the scanner calibration method using subspace division regression analysis and it were compared with conventional method.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.4-16
• /
• 2001

Most important step for the color matching in scanner is the color coordinate transformation from the scanner RGB space to device independent uniform color space. A variety of color calibration technologies have been developed for input device. Linear or nonlinear matrices have been conveniently applied to correct the color filter's mismatch with color matching function in scanners. The color matching accuracy is expected to be further improved when the nonlinear matrices are optimized into subdivided smaller color spaces than in single matrix of the entire color space. This article proposed the scanner calibration method using subspace division regression analysis and it were compared with conventional method.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.519-525
• /
• 2006

기존의 영역기반의 영상정합이나 에피폴라 기하 혹은 고도값 제한 등을 통해 정합의 탐색영역을 줄임으로 영상정합의 효율성을 높이는 방법들은 비슷한 형태의 고층 건물이 밀집되어 있는 대규모 도심지와 같은 경우 오정합의 가능성이 크며 정합에 소요되는 시간도 여전히 오래 걸리는 단점을 갖고 있다. 이러한 단점을 보완하기 위하여 건물 인식을 통한 영상정합법에 대하여 연구를 수행하고자 한다. 본 논문에서는 새로운 영상정합기법의 기초연구로서 컬러영상으로부터 경계정보와 색상 정보를 활용하여 동일 건물 인식에 관하여 실험을 수행하였다. 경계정보와 색상정보를 활용하기 위하여 각각 보완된 Hausdorff 거리개념과 보완된 컬러 인덱싱 기법을 적용하였다. 각각의 정보를 단독으로 활용한 경우 동일건물의 인식률이 경계정보의 경우 46.5%, 색상정보의 경우 7.1%로 매우 낮았으나, 두 가지 정보를 조합하여 인식을 실시한 결과 78.5%로 인식률이 높아지는 것을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제16권1호
• /
• pp.38-44
• /
• 1978

Color is an important factor in dental esthetics. Application of natural tooth color will not fail to produce pleasing results. But a standardized method of shade matching has not been adopted. If we are to overcome the color matching problem in dentistry, an understanding of the nature of color and light is essential. The purpose of this study was to compare the effects of different light sources and different background colors on the ability of observers to correctly match shades of artifical teeth. And observation was made to determine if the time spent in making a shade match was a factor in the correctness of the response. A test method was devised and 50 individuals made observations which were recorded and analyzed. $X^2$-test gave results indicating that the time factor had no effect on the response made. An analysis of variance showed the following effects significant at the five percent level; (1) light source (2) background color (3) subject. The following conclusions can be drawn from this study; (1) The time spent in making shade selection is not a factor in the correctness of the selections. (2) The light source used is an important factor in matching tooth shade; and there is no significant difference between the light sources in shade matching. (3) Under the conditions of this study, the greatest accuracy in shade matching was obtained on the brown background.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.345-349
• /
• 2014

A direct-lit color-matching liquid crystal display using a lenticular lens array with grouped lens elements that image linear RGB light sources on the RGB subpixels of a color filter to enhance transmittance is designed, simulated, and fabricated. The RGB LED linear light sources were fabricated using small RGB LEDs in a linear array arrangement, and the lenticular lens array consisted of eight units of the same structure with a gap of 2.19 mm. The optical transmittance of the liquid crystal panel was improved by as much as 240% due to the color matching.