• The Journal of Advanced Prosthodontics
• /
• v.16 no.4
• /
• pp.231-243
• /
• 2024

PURPOSE. The objective of the study was to analyze the impact of cement, bonding pretreatment, and ceramic abutment material on the overall color results of CAD-CAM ceramic crowns bonded to titanium-based hybrid abutments. MATERIALS AND METHODS. For single implant restoration of a maxillary lateral incisor a total of 51 CAD-CAM-fabricated monolithic lithium disilicate crowns were fabricated and subsequently bonded onto 24 lithium disilicate Ti-base abutments, 24 zirconia Ti-base abutments and 3 resin abutment replicas as a control group. The 48 copings were cemented with three definitive and one provisional cement on both grit-blasted and non-blasted Ti-bases. The color of each restoration and surrounding artificial gingiva was measured spectrophotometrically at predefined measuring points and the CIELAB (ΔE_ab) color scale values were recorded. RESULTS. The color outcome of ceramic crowns bonded to hybrid abutments and soft tissues was affected differently by cements of different brands. Grit-blasting of Ti-bases prior to cementing CAD-CAM copings affected the color results of allceramic crowns. There was a significant difference (P = .038) for the median ΔE value between blasted and non-blasted reconstructions at the cervical aspect of the crown. Full-ceramic crowns on zirconia Ti-base abutments exhibited significantly lower ΔE values below the threshold of visibility (ΔE 1.8). In all subcategories tested, the use of a highly opaque temporary cement demonstrated the lowest median ΔE for both the crown and the artificial gingiva. CONCLUSION. Various cements, core ceramic materials and airborne particle abrasion prior to bonding can adversely affect the color of Ti-base supported ceramic crowns and peri-implant soft tissue. However, zirconia CAD-CAM copings and an opaque cement can effectively mask this darkening.

• Archives of design research
• /
• v.20
• /
• pp.265-276
• /
• 1997

I intend to grope for the desirable outdoor color environment creation plan through researching situation of our apartment houses color environment and grasping the point at issue. The rearch was made that Ilsan(16 items) new city apartment were selected and the color seperately measured such as the dominant, the aid, the accent colors through applied color component ratio was researched by calculating square measure of matched colors and through that the evaluation of apartment complex color environment was formed. The planned construction problems were issued from comparing the planned scheme and the present carrying color status guide by investigating the color plan applied Ilsan new city. The current out apartment outdoor color environment is poor, and the color plan of the early stage has many insufficient parts and many operation errors. For the creation of desirable color environment, the color plan establishment by regional characteristics, the color environment management, though exhaustive color consultation, and the external construction technique improvement, the standard color sheet diffusion, the color understanding of architects, the public relations (P.R), the education on the importance of color are required.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.29-34
• /
• 2015

Traffic lights are common in cities and are important cues for the path planning of intelligent vehicles. In this paper, we propose a robust and efficient algorithm for recognizing traffic lights from video sequences captured by a low cost off-the-shelf camera. Instead of using color information for recognizing traffic lights, a shape based approach is adopted. In learning and detection phase, Histogram of Oriented Gradients (HOG) feature is used and a cascade classifier based on Adaboost algorithm is adopted as the main classifier for locating traffic lights. To decide the color of the traffic light, a technique based on histogram analysis in HSV color space is utilized. Experimental results on several video sequences from typical urban environment prove the effectiveness of the proposed algorithm.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.118-124
• /
• 2016

The shape and location of the cutoff shield in a projection-type headlight system were optimized by a ray-tracing technique. A shield based on a Petsval surface showed better cutoff characteristics than a flat or cylindrical shield, such as a sharp intensity gradient and less color separation at the cutoff line. Adjustment of the shield’s location between the reflector and the aspheric lens further improved its cutoff characteristics.

• Science of Emotion and Sensibility
• /
• v.12 no.3
• /
• pp.351-356
• /
• 2009

The study is about how the difference in education levels can affect the subjects' use of color and find out the features of the effect. This experimental study focused on the differences in color expression using the outline picture of a painting before and after being exposed to a full-color picture of the original painting. Differences between two conditions with two different stimuli were observed and the cause of the differences was analyzed based on the number of colors and the quantity of colors and composition of the colors used by the subjects. The study precedes an experiment based on how the level of education though experience can affect the use of colors. This study is focused on the various effects of color usage by children and adults who have various degrees of visual experience. In addition, the study analyzes how design majored subject differed in the use of color from non-design majored subject and compares the use of colors by the two groups. The results showed that design majored subject tended to use less coloring patterns after seeing the stimulus of the Monet picture with more colors, and included the colors from the stimuli they were exposed to. The non-design majored subject who viewed the Mondrian painting demonstrated opposite results by using less number of colors than before seeing the stimuli. In comparison to design majored subject, the variations in selected colors and the quantity of color by non-design majored subject were not consistent.

• Korean Journal of Poultry Science
• /
• v.42 no.2
• /
• pp.125-132
• /
• 2015

The Far Infrared Ray (FIR) is part of the natural energy as light spectrum of sunlight. Human can disentangle the colors within visible ray, but FIR is invisible to human sight because it has longer wavelength than visible ray. The effect of using FIR on broiler performance, blood biochemical profiles and fecal gas emission from litter. Day-old semi-broiler chicks (Ross ♂ ${\times}$ Hyline ♀) were obtained and assigned to eight pens, 2 replicates of white and green color LED light, and with FIR on each color light, in a 20L:4D of lighting program. The body weight gain and feed efficiency were tend to improve under the green color than white color, which were increased by exposing to FIR on both color light. Emission of ammonia and lower hydrocarbons from litter were not different from each color but there was a decrease by exposing to FIR regardless of light color. The level of blood aspartate aminotransferase (AST) tends to be decreased under green color than white color, and this tendency becomes more pronounced as exposing to FIR. Therefore significantly increased under white color without FIR than green color with FIR (P<0.05). The levels of albumin and immunoglobulin were not different from each color but there was an increase by exposing to FIR regardless of light color. In conclusion, exposing to Far Infrared Ray (FIR) when broiler raising, there is potential to increase broiler performance because of improvement of bioactivity and raising environment.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.53.2-53.2
• /
• 2014

Radial color gradient of early type galaxies (ETGs) is a key tool for studying the evolution of these galaxies. In this work, we investigated whether ETGs having negative or positive color gradients show any distinguishable characteristics in the galaxy properties. We selected sample of 211 ETGs at 0.01 < z < 0.5 in the Spitzer FLS field, then we constructed u-R color gradients. We obtained the stellar mass, specific star formation rate and fluxes of emission lines of each ETG from MPA-JHU DR7 catalog. Spitzer IRAC and MIPS 24 micron data were used to detect dust emission from the ETGs. Preliminary result shows that less massive galaxies are likely to have positive color gradients, which is probably due to the ongoing star formation in the galaxy core. Almost all AGNs have negative color gradients. This probably is because AGNs are located in relatively massive galaxies with little ongoing star formation. There exists a marginal difference in the percentage of galaxies with PAH emission between ETGs having positive color gradient and negative color gradient. This also supports that ETGs with positive color gradient are galaxies having enhanced star formation.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.23-31
• /
• 2004

The purpose of this study is to analyze the satisfaction, practical use, preference in design and recognition of the Saenghwalhanbok in the adult females living in Gyeongnam province. The data used for this study were collected by questionnaires and 420 questionnaires were used for statistic analysis. The data were analyzed by using the SPSS 8.0 to perform the ANOVA, $X^2$-test, t-test. The results of this study can be summarized as follows; Most women have Saenghwalhanbok for wearing in festive days. who showed good impression on the Saenghwalhanbok is high-educated people, and high-incommer showed positive preference as well. The color of blouse and skirt is different each other. The most preference color is soft color. The purchasing behavior on the Saenghwalhanbok was verified that there are planning of purchase because of convienience in wearing. The primary reason for not buying Saenghwalhanbok is price. So the goods of various level of price should be prepared, and the preference factors of purchasing for younger ages were color, patterns and design, and for old ages were quality of clothes, colors and patterns. Major application of the Saenghwalhanbok was found that wearing for festive days as it is Korean traditional costume.

• The International Journal of Costume Culture
• /
• v.6 no.1
• /
• pp.11-18
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystallization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes. In nylon fabrics, the salt samples had little color difference in the dyeing with C.I. Acid Yellow 23 and C.I. Acid Blue 158. All salt samples' gray scale was 5 grade. In wool fabrics, the salt samples had little color difference in dyeing with C.I. Acid Yellow 23 and C.I. Arid Blue 158. All salt samples' gray scale was 5 grade. Generally, the dyeing of levelling dyes using recovered salts from farm drainage had little color difference than the dyeing of levelling dyes using commercial sodium sulfate.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.18-23
• /
• 2016

QFN (Quad Flat No-leads Package) is one of the SMD (Surface Mount Device). Since there is no lead in QFN, there are many defects on solder. Therefore, we propose an efficient mechanism for QFN solder defect detection at this paper. For this, we employ Convolutional Neural Network (CNN) of the Machine Learning algorithm. QFN solder's color multi-layer images are used to train CNN. Since these images are 3-channel color images, they have a problem with applying to CNN. To solve this problem, we used each 1-channel grayscale image (Red, Green, Blue) that was separated from 3-channel color images. We were able to detect QFN solder defects by using this CNN. In this paper, it is shown that the CNN is superior to the conventional multi-layer neural networks in detecting QFN solder defects. Later, further research is needed to detect other QFN.