• 한국버섯학회지
• /
• 제16권4호
• /
• pp.287-292
• /
• 2018

팽이버섯 신품종'여름향1호'는 '갈뫼'와 '건국1호'로부터 분리한 단포자를 교배함으로써 육성된 품종으로, 갓색이 연한 갈색을 나타내며, 고온성이면서 재배기간이 짧은 장점이 있다. $16^{\circ}C$ 고온에서 병재배 시 배양 기간은 22일, 초발이 소요일수는 6일, 생육일수는 10일로 총재배 기간이 38일이 소요되어 대조품종 '금향'에 비해 3일, '갈뫼'에 비해 7일이 단축되었다. 특히 버섯 발생이 빠르면서도 균일성이 우수하였으며, 갓 색은 진한 미색인 '금향'과 중간 갈색인 '갈뫼'의 중간 수준인 연한 갈색을 띠었다. 수량은 850 ml(Ø59) 병 당 138 g으로 '금향' 대비 10% 증수되었다.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.389-395
• /
• 2017

This paper investigates a method to improve the lighting performance of white light-emitting diodes (WLEDs), which are packaged using two separate remote phosphor layers, a yellow-emitting YAG:Ce phosphor layer and a red-emitting ${\alpha}-SrO{\cdot}3B_2O_3:Sm^{2+}$ phosphor layer. The thicknesses of these two layers are $800{\mu}m$ and $200{\mu}m$, respectively. Both of them are examined in conditions where the average correlated color temperatures (CCT) are 7700 K and 8500 K. For this two-layer model, the concentration of red phosphor is varied from 2% to 30% in the upper layer, while in the lower layer the yellow phosphor concentration is kept at 15%. It was found interestingly that the lighting properties such as color rendering index (CRI) and luminous flux are enhanced significantly, while the color uniformity is maintained in a relatively close range to the one of one-layer configuration (measured at the same correlated color temperature). Besides, the transmitted and reflected light of each phosphor layer are revised by combining Kubelka-Munk and Mie-Lorenz theories. Through analysis, it is demonstrated that the packaging configuration of two-layer remote phosphor that employs red-emitting ${\alpha}-SrO{\cdot}3B_2O_3:Sm^{2+}$ phosphor particles provides a practical solution for general WLEDs lighting.

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.1-5
• /
• 2013

We developed high-efficient 6W-LED package with simple structure by applying Heat Slug and silicone-reflector. LED package was manufactured in $8.5{\times}8.5mm$ sized multi-chip structure having thickness of $500{\mu}m$ achieved by bonding silicon-reflector with prepreg on top of the plate after implementing the reflector placed on copper substrate Half Etching by thickness of $200{\mu}m$. The luminous flux, luminous efficacy, correlated color temperature, color rendering index and thermal resistance of developed LED was evaluated, and it verified the application of products by applying it to 120W-LED road luminaires through simulation. The luminous efficacy of LED package reached over 130lm/W, and it is possible to be manufactured into 120W-LED road luminaires using 18 packages. In addition, the simulation results showed average of horizontal illuminance and overall illuminance uniformity that is suitable for three-lane road.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.932-934
• /
• 2006

A relationship between discharge delay time and the aging method were investigated: A-Y (Address electrode - Scan electrode) aging and conventional X-Y(Common electrode - Scan electrode) aging with the variation of sustain voltage beyond self-erasing discharge. Although A-Y aging decreases discharge delay time, it has several drawbacks like non-uniformity of discharge, degradation of luminous efficiency and a color temperature. In a conventional aging condition which is carried out near the mid-margin voltage, discharge delay time is short in low voltage and high frequency condition. As an alternative to conventional voltage aging, high voltage aging is suggested which is carried out at self-erasing sustain voltage region. High voltage aging shows lower discharge delay time and fast aging speed than conventional voltage aging.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.517-524
• /
• 2013

The electrical and optical properties of fluorine-doped tin oxide films grown on polyethylene terephthalate film with a hardness of 3 using electron cyclotron resonance plasma with linear microwave of 2.45 GHz of high ionization energy were investigated. Fluorine-doped tin oxide films with a magnetic field of 875 Gauss and the highest resistance uniformity were obtained. In particular, the magnetic field could be controlled by varying the distribution in electron cyclotron deposition positions. The films were deposited at various gas flow rates of hydrogen and carrier gas of an organometallic source. The surface morphology, electrical resistivity, transmittance, and color in the visible range of the deposited film were examined using SEM, a four-point probe instrument, and a spectrophotometer. The electromagnetic field for electron cyclotron resonance condition was uniformly formed in at a position 16 cm from the center along the Z-axis. The plasma spatial distribution of magnetic current on the roll substrate surface in the film was considerably affected by the electron cyclotron systems. The relative resistance uniformity of electrical properties was obtained in film prepared with a magnetic field in the current range of 180~200A. SEM images showing the surface morphologies of a film deposited on PET with a width of 50 cm revealed that the grains were uniformly distributed with sizes in the range of 2~7 nm. In our experimental range, the electrical resistivity of film was able to observe from $1.0{\times}10^{-2}$ to $1.0{\times}10^{-1}{\Omega}cm$ where optical transmittance at 550 nm was 87~89 %. These properties were depended on the flow rate of the gas, hydrogen and carrier gas of the organometallic source, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.107.1-107.1
• /
• 2012

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. For improve the quality of white gold, we performed heat treatment on 14K white gold alloys at various age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14K white gold alloys. For solid solution treatment [ST], casted 14K white gold alloy specimens were treated at high temperature ($750^{\circ}C$) during 30 minute, and the specimens dropped to water for quenching immediately. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250^{\circ}C{\sim}300^{\circ}C$). After the heat treatment, we observed increased hardness from 144 Hv to 214 Hv by Vicker's hardness tester. Variation of the grain size measured by optical microscopy (OM) and scanning electron microscopy (SEM) images. By electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. After heat treatment, 14K white gold alloys showed improved hardness and became uniformity of grain size by age-hardening treatment.

• 동아시아식생활학회지
• /
• 제22권4호
• /
• pp.543-549
• /
• 2012

Muffins were prepared with different amounts of rice bran powder (0~30%), and their quality characteristics were investigated. The specific gravity of batters increased with increasing rice bran. While the initial pasting temperature increased with increasing rice bran amount, peak viscosity and viscosity at $95^{\circ}C$ after 15 min gradually decreased. The pH value of batters and muffins decreased with increasing rice bran amount. Moisture content of muffins was affected by the addition of rice bran powder. The lightness and yellowness values of muffins decreased with increasing rice bran amount, whereas redness value increased. For textural characteristics, hardness, gumminess and chewiness of muffins significantly increased with increasing rice bran amount, whereas cohesiveness and springiness decreased. Aircell uniformity of muffins became larger and more random as rice bran powder content increased. In the sensory evaluation, scores of taste and texture were the highest in muffin added with 5% rice bran powder. Overall acceptability was highest in control and the 5% group without any significant difference. Values of color, flavor, taste, texture and overall acceptability of muffins tended to decrease as rice bran powder content increased.

• 한국축산식품학회지
• /
• 제29권1호
• /
• pp.82-90
• /
• 2009

This study was carried out to evaluate the effects of microwave power level on cooking properties of ground pork patties (fat level: 20%). Each patty was cooked from a thawed state to $76.7^{\circ}C$ (center temperature) in a microwave oven with power levels of 40% (360 W), 60% (540 W), 80% (720 W), and 100% (full power, 900 W), respectively. Cooking rate increased with power level, and the non-uniformity also increased with time during cooking. Overheating at the edge of the patties was observed for all power levels, and maximum temperature differences in between the edge position and center position were found in patties cooked at the 900 W power level. Compositional properties, total cooking loss, and drip loss were not affected by power level, although moisture content was lower at the edge than at the center position. As the power level increased, the reduction in patty diameter of cooked patties increased while the reduction in patty thickness decreased. Pork patties cooked at lower power levels (360 W and 540 W) had higher shear force values than those cooked at higher power levels (720 W and 900 W). Few changes were observed in instrumental color values.

• 한국광학회지
• /
• 제15권5호
• /
• pp.443-448
• /
• 2004

국제단위계 중의 하나인 칸델라 눈금을 두 개의 광도계를 사용하여 실현하였다. 광도계의 분광감응도는 광출력을 전기출력으로 치환하여 측정하는 극저온 절대복사계에 소급하여 측정하였다. 광도계 외부에 설치된 정밀 개구는 다이아몬드 회전가공기로 가공하였으며 그 면적은 불확도 0.05%(k = 1) 이내로 측정하였다. 이 광도계를 사용하여 광도 벤치 위에서 1 kW FEL 전구로 칸델라 단위를 실현할 때 불확도를 분광감응도, 감응도의 공간 균일도, 개구 면적, FEL 전구의 색온도와 위치 재현성을 고려하여 평가한 결과 0.25%(k = 1)를 얻었다. 실현한 눈금의 유효성을 확인하기 위하여 미국 NIST의 눈금과 비교한 결과 0.1% 이내에서 일치하였다.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.124-131
• /
• 2016

Several research works for finding and optimizing the methods of dispensing high viscosity phosphor used in the fabrication of white LED's are currently in progress. High viscosity phosphor dispensing with a high accuracy is crucial because the dispensing rate and uniformity directly affect parameters such as the CIE chromaticity diagram, color temperature and luminous flux of white LED's. This study presents a novel method of dispensing high viscosity phosphor using electrohydrodynamic printing. The dispensing rate was optimized less than 0.01 mg phosphor using experiments and optimizing the process parameters including the standoff distance from the nozzle to the substrate, ink supply pressure, and multi-step pulsed waveform magnitude ratio. The dispensing rate was measured by dispensing 20 dots using drop-on-demand with the optimized parameters, and the experiments were repeated 10 times to maximize the data accuracy. The average dispensing rate that can be reliably used for high viscosity phosphor dispensing was 0.0052 mg.