• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.62-63
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.933-934
• /
• 2009

• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 1973년도 제12차 학술대회
• /
• pp.56.1-56.1
• /
• 1973

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.291-291
• /
• 2005

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.288-294
• /
• 2009

The platelet AlO(OH) nano colloids were prepared by hydrothermal reaction of the $\gamma-Al_2O_3$ obtained with dehydration of $\gamma$-AlO(OH) and dilute $CH_3COOH$ solution. In hydrothermal reaction process, reversible reaction was accompanied between $\gamma-Al_2O_3$ and AlO(OH), and hydrothermal reaction temperature, hydrothermal reaction time and $CH_3COOH$ concentration had an effect on the crystal structure, surface chemical property, surface area, pore characteristics and crystal morphology of the AlO(OH) nano colloid particles. In this study, it was investigated to the hydrothermal reaction condition of the AlO(OH) nano colloid for using catalyst support, heat resisting agent, adsorbents, binder, polishing agent and coating agent. The crystal structure, surface area, pore volume and pore size of the platelet AlO(OH) nano colloids were investigated by XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method in liquid nitrogen temperature.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.399-404
• /
• 2005

Anti-reflection film was coated by using spherical silica nano colloidal particles and fumed silica particles. Silica colloid sol was reserved between two inclined slide glasses by capillary force, and particles were stacked to form a film onto the substrate as the upper glass was sliding. The deposition processes were studied to enhance the wavelength dependency of the light transmittance and to control the effective refractive index of the film. Both of the spherical and fumed silica particles showed an enhancement of $4.0-4.4\%$ in light transmittance by one step coating. The dependence of the transmittance on wavelength was largely improved at the longer wavelength by partial coating of fumed particles on the film of spherical particles. The effective refractive index of the film was controlled by removing latex particles that were co-deposited with silica particles. Using this process the light reflectance from one side of the glass substrate could be reduced from $4.2\%$ to $0.6\%$ although zero reflectance was not achieved due to the agglomeration of the latex particles.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1989년도 제10회 학술강연회초록집
• /
• pp.41-58
• /
• 1989

현재 자동차엔진유를 비롯한 각종윤활유에 마찰마모방지제 및 산화방지제로 사용되고 있는 유용성 몰리부덴계 화합물은 윤활제의 첨가제로서 주목받고 있다. 이와 같은 유용성 몰리부덴계 화합물은 윤활제의 첨가제로서 마찰부분의 고온에 의해 열분해함으 2 유화몰리부덴($MoS_2$)을 생성하기 위해서 합성한 것이다. $MoS_2$는 마찰마모 감소제로서 잘 알려져 있지만 고체이기 때문에 마찰면에 COATING 하거나 윤활유에 분산시켜 사용하고 있다. 그러나 윤활유에 분산시키는 것과 마찰면에 흡착시키는 것과는 계면화학적 반대현상이므로 문제가 발생하게 된다. 그러므로 윤활유중에 안정한 분산계를 만들어 사용시에는 비교적 안정한 COLLOID 계가 파손되지 않아야 한다. 그러나 열가학적으로 불안정한 COLLOID 계를 유지하기는 어려운 문제이다. 그러므로 유용성인 몰리부덴계 화합물을 윤활유에 용해시켜 열적 혹은 TRIBOCHEMICAL 적으로 분해해 줌으로서 마찰표면에 $MoS_2$의 생성이 필요하다. 이와같은 목적으로 개발된 유용성 몰리부덴화합물은 마찰마모감소작용 및 산화방지작용의 메카니즘에 관해서는 불투명한 점이 많다. 본 논문은 유용성 몰리부덴계 화합물중 Molybdenum dialkyl dithiocarbamate (이후 MoDTC로 명함)를 윤활유 첨가제로 사용해 마찰실험을 통하여 마찰감소작용의 메카니즘을 해명하고, 특히 마찰표면에 생성될 $MoS_2$막의 효과에 관해 중점을 두고 분위기의 효과로 부터 MoDTC의 마찰감소작용의 인자에 대한 고찰을 행하였다.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.285-292
• /
• 2005

Anti-reflection film was coated by using spherical silica nano colloids. Silica colloid sol was reserved between two inclined slide glasses by capillary force, and particles were convectively stacked to form a film onto the substrate as the water evaporates. As the sliding speed increased, the thickness of the film decreased and the wavelength at the maximum transmittance decreased. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness was measured by proffer and calculated from the wavelength of maximum transmittance and the effective refractive index. The effective refractive index of the film could be controlled by a subtle controlling of the coating speed and by mixing two different sized silica particles. When the 100 nm and 50 m particles were mixed at 4:1-5:1 volume ratio, the maximum transmittance of $95.2\%$ for one-sided coating was obtained. This is the one that has increased by $3.8\%$ compared to bare glass substrate, and shows that $99.0\%$ of transmittance or $1.0\%$ of reflectance can be achieved by the simple process if both sides of the substrate are coated.

• 대한핵의학회지
• /
• 제27권2호
• /
• pp.298-304
• /
• 1993

To estimate the bone marrow involvement of leukemia, we peformed scintigraphies using $^{99m}Tc$ antimony sulfide colloid and Gallium-67. Total 13 patients were included and obtained 14 study sets of $^{99m}Tc$ antimony sulfide colloid and gallium-67 and compared with bone marrow aspiration biopsy and clinicolaboratory datas. $^{99m}Tc$ Antimony scan showed localized defect in 4 patients who had relapse. No false positive or negative results were observed. Gallium 67 showed localized increased uptake in 2 of 4 relapsed patients. Therefore, bone marrow scan is useful for the evaluation of marrow infiltration in ieukemic patients.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.459-462
• /
• 2006

Formic acid recently attracted attention as an alternative fuel for direct liquid fuel cells(DLFCs) due to its high theoretical open circuit voltage(1.45V). In this paper, a novel chemical strategy is described for the preparation and characterization of carbon-supported and surface-alloys, which were prepared by using a successive reduction process. After preparing Au colloid nanoparticles, the deposition of Au colloid nanoparticles occurred spontaneously in the carbon black-dispersed aqueous solution. Then nano-scaled Pt layer were formed on the surface of carbon-supported Au nanoparticles. The Au-Pt[x] showed the higher electrocatalytic activity than those of the particle-alloys and commercial one (Johnson-Matthey) for the reaction of formic acid oxidation when the mass-specific currents were compared. The increased electrocatalytic activity might be attributed to the effective surface structure of surface-alloys, which have a high utilization of active materials for the surface reaction of electrode.