• Journal of the Korea Society for Simulation
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2009

In this paper, we obtain the optimal number of interfaces/channels in wireless mesh networks by simulation. The simulation study is done in static multi-channel multi-interface environment. When many nodes use a single interface and channel and contend for the channel, collisions of RTS/CTS results in network performance degradation. To avoid such degradation and reduce interferences between the adjacent nodes, use of multi-interface/channel is considered. 802.11a and 802.11b systems offer 12 and 3 orthogonal channels respectively and multi-interface/channel scheme could be applied. But rare research about the optimal number of interfaces/channels has been studied. Therefore, in this paper, simulation study for the optimal number of interfaces/channels in wireless mesh network is made.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.356-364
• /
• 2023

Sophisticated Air Navigation System has contributed to enhancing the capacity of airspace capacity, leading to an efficient airspace environment. However, it has acted as a factor increasing the probability of collision. When an aircraft fails to maintain vertical separation and instead exhibits lateral positional errors, it does not necessarily lead to a collision. However, as the lateral positional accuracy increases, the randomness of aircraft positions decrease, resulting in an elevated probability of collisions. Consequently, The International Civil Aviation Organization has introduced Strategic Lateral Offset Procedures(SLOP), intentionally deviating aircraft from the centerline of airways. Likewise, South Korea also operates Offset procedure. The Y579 was operated using the Offset before its conversion to a dual airway and the analysis of the Offset track revealed that it was being operated similarly to a unidirectional dual airway. This paper develops a safety assessment methodology applicable to unidirectional dual airways, and applies it to perform a safety assessment of the Y579 Offset procedure.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.341-347
• /
• 2023

The subway is one of the most common and important means of transportation in modern society. In order to use the subway safely, tracks are necessary, but trains are prone to derailment and collisions. In order for the train to run safely on the track, the fishplate that connects the line connection is used. The damaged railway was a fishplate for connecting subway lines used for 11 years, and damage analysis and countermeasures were presented. Beach marks were observed on both fracture surfaces, and striations appeared at the range of crack propagation. The damaged part is Cr carbide, which has a higher hardness than the base metal, and is judged to be embrittled and destroyed by fatigue. The SM50C fishplate was subjected to a cyclic stress of about 59% of the upper limit of tensile-compression fatigue limit, but inclusions were the cause of failure. In order to prevent fatigue failure of the SM50C steel fishplate, the occurrence of inclusions should be minimized and processed to have a homogeneous structure when manufacturing the fishplate. In addition, compressive residual stress is given through surface modification such as peening to control crack generation. It is necessary to minimize the change in shape that can become a stress concentration part along with accurate fastening of the bolt, and to design the stress distribution to be as uniform as possible.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.35-41
• /
• 2023

On December 19, 2015, as Article 29-3 (Installation of Accident Recording Devices and Provision of Information) of Motor Vehicle Management Act came into force, In Korea, the EDR (Event Data Recorder) reports are often used for the analysis of various traffic accident cases such as multiple collisions, traffic insurance crimes, and sudden unintended acceleration (SUA), and the others. So many investigators have analyzed the driver's behavior and vehicle situation by comparing the time zero in the EDR report to the actual crash time in dash-cam (or CCTV). Time zero (T0) is defined as the reference time for the record interval or time interval when recording an accident in Article 56-2, Enforcement rule of Performance and Standard for Automobile and Automotive parts. Also in the EDR report, time zero (T0) is defined as whichever of the following occurs first; 1. "wake-up" by an air-bag control system, 2. Continuously running algorithms (by monitoring of longitudinal or lateral delta-V), 3. Deployment of a non-reversible deployment restraint. We have already proposed the "Flowchart & Checklist" to adopt the EDR report for traffic accident investigation and the necessity of specialized institutions or courses to systematically educate or analyze the EDR data. Therefore, in this paper, we report to traffic accident investigators notable points and analysis methods based on some real-world traffic accidents that can be misjudged in specifying time zero (T0).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1794-1799
• /
• 2022

Recently, the increasing number of overloaded vehicles on the road poses a risk to traffic safety, such as falling objects, road damage, and chain collisions due to the abnormal weight distribution, and can cause great damage once an accident occurs. therefore we propose to build an object detection-based AI model to identify overloaded vehicles that cause such social problems. In addition, we present a simple yet effective method to construct an object detection model for the large-scale vehicle images. In particular, we utilize the large-scale of vehicle image sets provided by open AI-Hub, which include the overloaded vehicles. We inspected the specific features of sizes of vehicles and types of image sources, and pre-processed these images to train a deep learning-based object detection model. Also, we propose an integrated system for tracking the detected vehicles. Finally, we demonstrated that the detection performance of the overloaded vehicle was improved by about 23% compared to the one using raw data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1653-1659
• /
• 2022

Virtual reality content provides users with a high sense of immersion by using HMD devices. However, while wearing the HMD device, it is difficult to determine the user's location or distance from obstacles, resulting in injuries due to physical collisions. In this paper, we propose a reminder module to prevent accidents by notifying the risk of collision with obstacles while wearing the HMD device. The proposed module receives the user's state from the acceleration and gyro sensor and determines the motion that is likely to cause a collision. If there is an obstacle in the expected collision range, a buzzer sounds to the wearer. As a result of the experiment, the accuracy of obstacle detection in the state of wearing the HMD was 86.6% in the 1st stage and 83.3% in the 2nd stage, confirming the performance of the accident prevention reminder.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.264-264
• /
• 2019

The purpose of this paper is to establish development concepts for a novel collision avoidance system with preventing function of navigator's human error (Hu-CAS) in ship control behaviors. Hu-CAS consists of four modules: 1) collision risk assessment module to estimate collision priority between the ship and objects, 2) decision-making module to decide collision risk levels, 3) parameter estimation module needed in the ship control to avoid collisions and 4) control system to control the rudder angle and speed. Hu-CAS, proposed in this paper, can provide a novel system substitution current Autopilot and/or a CAS be teen manned vessel and Autonomous ship in a future.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.89-97
• /
• 2022

Various efforts are needed to prevent accidents because ship collisions can cause various negative situations such as economic losses and casualties. Therefore, research to prevent accidents is being actively conducted, and in this study, new leading indicators for preventing ship collision accidents is proposed. In previous studies, the risk of collision was expressed in consideration of the distance between ships in a specific sea area, but there is a disadvantage that a new model needs to be developed to apply this to other sea areas. In this study, the density-based ship domain DESD (Density-based Empirical Ship Domain) including the environment and operating characteristics of the sea area was defined using AIS (Automatic Identification System) data, which is ship operation information. Deep clustering is applied to two-dimensional DESDs created for each sea area to cluster the seas with similar operating environments. Through the analysis of the relationship between clustered sea areas and ship collision accidents, it was statistically tested that the occurrence of accidents varies by characteristic of each sea area, and it was proved that DESD can be used as a leading indicator of accidents.

• Earthquakes and Structures
• /
• v.23 no.2
• /
• pp.129-138
• /
• 2022

One of the objectives to prevent building pounding between two adjacentstructures is to considerseparation distance or decrease relative displacement during seismic excitation. Although the majority of building codes around the world have basically suggested some equations or approximately recommended various distances between structuresto avoid pounding hazard, but a lot of reportsin zone of pounding have obviously shown thatsafety situation or economic consideration are not always provided due to the collisions between buildings and the cost of land, respectively. For this purpose, a dynamic MDOF model by having base isolation system is numerically considered and using various earthquake records, relative displacements are mathematically investigated. Different equations to determine the value of damping ratio are collected and the results of evaluations are listed for comparison among them to present a new equation for determination of impact damping ratio. Presented equation is depends significantly on impact velocity before and after impact based on artificial neural network, which the accuracy of them is investigated and also confirmed. In order to select the optimum equation, hysteresisloop of impact between base of building and rubber bumper is considered and compared with the hysteresis loop of each impact, calculated by different equations. Finally, using representative equation, the effect of thickness, number and stiffness of rubber bumpers are numerically investigated. The results of analysis indicate that stiffness and number of bumpers have significantly affected in zone of impact force while the thickness of bumpers have not shown significant influence to calculate impact force during earthquake. For instance, increasing the number of bumpers, gap size between structures and also the value of stiffness is caused to decrease impact force between models. The final evaluation demonstrates that bumpers are able to decrease peak lateral displacement of top story during impact.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.634-639
• /
• 2013

The aim of the study is to develop the 3D visualization of Building Information Model and integrated 4D model for optimization of resources in the construction project. This study discuss the process of methodology and creation of 4D model of the project and simulate it to monitor the workflow at the site. Different stages of the construction process and activities are generated by using Revit and MS Project. MS project has been used for creation of the schedules and these are linked with the Revit for 3D modeling. The time used as the fourth dimension and 4D model created by using Navisworks Time liner software. Narges shopping center is presented as a case study to realize the actual uses and benefits of Building Information Model (BIM). Narges shopping mall is located in Tehran, Iran. As a part of Hekmat master plan, Narges shopping center is an 11 stores building with a total area of 30000 Sq.m. This shopping and entertainment center is comprised of 150 retails and two multi-use public halls with a capacity of 400 persons each and underground parking with total 400 parking space. The main purpose of architecture was to create an urban public center along with its revolving, spiral like form and an ever changing continuous façade by means of different colors, materials, which is in harmony with the other building of the master plan. The approximate cost of the project is $17 million and duration of the project schedule is 30 months. The developed Building Information Model enabled us to identify the potential collisions or clashes between various structural and architectural systems. 4D model has been used for limiting the interaction between subcontractors installing the different systems so rework could be avoided and productivity maximized. It is also observed that the utility of BIM for construction stimulation and clash detection is the best suitable method. Clash detection before the implementation of work is highly recommended to avoid rework.