• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.356-362
• /
• 2014

Wear and corrosion of the engine parts surrounded with combustion chamber is more serious compared to the other parts of the engine because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. Therefore, an optimum repair weldment as well as an available choice of the base metal for these parts are very important to prolong their lifetime in a economical point of view. It reported that there was an experimental result for repair weldment on the forged steel which would be generally used with piston crown material, however, it is considered that there is no study for the repair weldment on the cast steel of piston crown material. In this study, four types of electrodes such as 1.25Cr-0.5Mo, 0.5Mo Inconel 625 and 718 were welded with SMAW and GTAW methods on the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. In the cases of Inconel 625, 718, the weld metals and base metals exhibited the best and worst corrosion resistance respectively, however, 1.25Cr-0.5Mo and 0.5Mo indicated that corrosion resistance of the base metal was better than the weld metal. And the weld metal welded with electrodes of Inconel 625 revealed the best corrosion resistance among the electrodes, and Inconel 718 followed the Inconel 625. Hardness relatively also indicated higher value in the weld metal compared to heat affected zone and base metal. In particular, Inconel 718 indicated the highest value of hardness compared to other electrodes in the heat affected zone.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.90-96
• /
• 2013

Effects of dietary Scutellaria baicalensis extract (SBE) on growth, feed utilization and challenge test of olive flounder (Paralichthys olivaceus) were determined. Six hundred thirty fish averaging 5.0 g were distributed into 18, 180-L tanks. Six experimental diets were prepared in triplicate: SBE-0, SBE-0.5, SBE-1, SBE-2, SBE-3 and SBE-5 diets containing SBE at the concentrations of 0, 0.5, 1, 2, 3 and 5%, respectively. Fish were hand-fed to apparent satiation twice a day for 8 wks. At the end of 8-wk feeding trial, ten fish from each tank were infected by Edwardsiella tarda for challenge test. Survival and weight gain of fish were not affected by dietary concentrations of SBE. However, specific growth rate of fish fed the SBE-2 diet was higher than that of fish fed the SBE-0, SBE-1, SBE-3 and SBE-5 diets. Neither feed efficiency nor serum chemical composition of fish was affected by dietary concentrations of SBE. The cumulative mortality of fish fed the SBE-0 diet was 100% at 96 h after E. tarda infection, but 77 to 87% for fish fed the other diets. Dietary inclusion of 2% SBE appears to be recommendable to improve specific growth rate of fish and SBE had the potential to mitigate mortality of fish at E. tarda infection.

• Biomedical Science Letters
• /
• v.11 no.3
• /
• pp.397-405
• /
• 2005

Noise may cause damage of the auditory system, hypertension, and cardiovascular disease. However, we haven't the data enough to be available for understanding various effects of noise on the human body. The current study was prospectively designed to investigate the changes of the cardiac factors and cerebral hemodynamics following a transient exposure to noise in young people. 80 subjects (mean aged $23.45\pm2.40$ years) participated in this experiment and were exposed to excavator-noise with 90 decibels for 15 minutes using ear-phone. Cardiac factors such as heart rate (HR), blood pressure (BP) and heart rate-systolic pressure product (RPP), and cerebral hemodynamics such as mean blood flow velocities (Vm), pulsatility indexes (PI), resistance indexes (RI) and mean blood flow velocities at breathing-hold (Vh) in the middle (MCA), anterior (ACA) and posterior cerebral arteries (PCA) were measured before (baseline) and during the noise-exposure. Although there were individual differences in above mentioned parameters, HR, systolic and diastolic BP, RPP, MCA-Vm, MCA-PI, MCA-RI, ACA-Vm, ACA-PI, ACA-RI, PCA-Vm, PCA-PI, and PCA-RI during the noise-exposure decreased compared with the baselines (P<0.05 or P<0.01), The findings of the present study suggest that a transient exposure to excavator-noise at rest causes changes in the cardiac factors and cerebral hemodynamics with individual differences. Further studies need to be carried out for clarifying the effects of longer exposure and combined mental activity with noise exposure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.823-829
• /
• 2016

Yacon (YC), ginger (GG) and blueberry (BB) were added to the diet of juvenile rockfish Sebastes schlegeli to investigate the effects of these substances on growth, feed utilization and resistance to Streptococcus iniae compared to feed additive ethoxyquin. A total of 480 fish were distributed in 12 tanks and four experimental diets [control (Con), with 0.01% ethoxyquin, and 1% YC, GG and BB diets] were provided in triplicate. After an 8-week feeding trial, 20 fish from each tank were infected with Streptococcus iniae. Fish fed the BB diet had higher weight gain than fish fed the GG and Con diets. Feed efficiency of fish fed the GG and YC diets was higher than that of fish fed the BB and Con diets. The protein efficiency ratio of fish fed the GG diet was higher than that of fish fed any other diet. The cumulative mortality 54 h after infection of fish fed the Con diet was higher than that of fish fed any other diet. These results indicate that YC, GG, and BB are effective dietary additive, not only improving growth performance and feed utilization but also lowering the mortality of juvenile rockfish exposed to S. iniae.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.4
• /
• pp.338-343
• /
• 2006

Histological observations of the barbels of torrent catfish (Amblycipitidae) in Korea are reported. The bullhead torrent catfish (Liobagrus andersoni) and Korean torrent catfish (L. obesus) have eight obvious barbels in two pairs each on the maxilla and mandible. Each barbel is composed of an epidermis, dermis, and central cartilagerod. The epidermis of the maxillary and mandibular barbels of the bullhead torrent catfish is thicker than that of the Korean torrent catfish (P<0.05) and is formed of stratified epithelium that contains many cutaneous taste buds and a few small club cells. There are many taste buds on the upper part of each barbel. The dermis consists of loose connective tissue fibers that enclose blood vessels and bundles of nerve fibers. The barbels of these fish can be categorized into stiff and flexible types and are accessory, feeding, and sensory structures. Our results validate the barbels as gustatory receptor organs for these fishes.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.447-458
• /
• 2024

In this study, the antioxidizing effect of 2,3-dicaffeoyl-epi-quinic acid (DEQA) was investigated. The antioxidant activity was evaluated by measuring the scavenging effect on DPPH radical and peroxynitrite and the reducing power on ferric ion. DEQA showed a scavenging effect and reducing power comparable to vitamin C used as a positive control. Also, DEQA effectively inhibited production of intracellular reactive oxygen species (ROS) in HT-1080 cells, showing the scavenging ratio of 43.8% even at 10 µM concentration of DEQA after 2 hours in HT-1080 treated with H₂O₂. In addition to this, DEQA inhibited the production of nitric oxide (NO) very effectively in Raw 264.7 cells. The above results suggest that DEQA has the potential to be developed as a natural antioxidant.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.386-390
• /
• 2017

A $5^{th}$-order low-pass filter (LPF) chip implemented in a six-layer low-temperature co-fired ceramic (LTCC) dielectric substrate has been presented. Lumped elements constituting the LPF are designed three-dimensionally in multilayers. In order to improve the parasitic and mutual coupling effects between them, the LPF is designed by sequentially integrating the three-dimensional (3D) lumped elements, by comparing it to the results of the schematic circuit and 3D electromagnetic (EM) analysis. The designed 3D LPF chip was fabricated in a six-layer LTCC substrate as small as $4.0{\times}3.22{\times}0.68mm^3$. The measured return and insertion losses are less than -11 dB and -0.61 dB, respectively, below 1.5 GHz.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.80-85
• /
• 2010

This study focused on laser assisted machining (LAM) of silicon nitride ceramic that efficiently removes the material through machining of the softened zone by local heating. The effects of laser-assisted machining parameters were studied for cost reduction, and active application in processing of silicon nitride ceramics in this study. Laser assisted machining of silicon nitride allows effective cutting using CBN tool by local heating of the cutting part to the softening temperature of YSiAlON using by the laser beam. When silicon nitride is sufficiently preheated, the surface is oxidized and decomposed and then forms bloating, micro crack and silicate layer, thereby making the cutting process more advantageous. HIPSN and SSN specimens were used to study the machining characteristics. Higher laser power makes severer oxidation and decomposition of both materials. Therefore, HIPSN and SSN specimens were machined more effectively at higher power.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.5
• /
• pp.581-588
• /
• 2014

Extensive researches toward pool boiling characteristics have been widely investigated. However, the correct understanding of its boiling crisis by Critical Heat Flux (CHF) phenomenon during steady and transient heat transfer as a fundamental database for designing heat generation systems is still need to be clarified. The pool boiling CHFs were investigated to clarify the generalized phenomena of transition to film boiling at transient condition. The CHFs were measured on 1.0 mm diameter horizontal cylinder of platinum for exponential heat generation rates with various periods for saturated liquids at atmospheric pressure. The incipience of boiling processes was completely different depending on pre-pressurization. Also, the dependence of pre-pressure in transient CHFs changed due to the wettability of boiling liquids. The trend of typical CHFs were clearly divided into the first, second and third groups for long, short and intermediate periods, respectively. By the effect of pre-pressurization, the boiling incipience mechanism was replaced from that by active cavities entraining vapor to that by the HSN in originally flooded cavies.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.40-44
• /
• 2010

Laser assisted machining (LAM) has been researched in order to machine the silicon nitride ceramics economically and effectively. LAM is an effective machining method by local heating of the cutting part to the softening temperature of the silicon nitride using laser beam. When silicon nitride ceramics is heated using a laser beam, the surface of silicon nitride ceramic is softened, oxidized and decomposed. And then surface hardness is decreased. Through machining in low viscosity and hardness conditions, silicon nitride was machined effectively and the life span of tool was increased. The plastic deformation was occurred due to softening of amorphous YSiAlON above $ 1,000^{\circ}C$. Transgranular fracture of ${\beta}-Si_3N_4$ was occurred when YSiAlON was not softened, but mostly intergranular fracture was occurred by the plastic deformation of softened YSiAlON.