• 제목/요약/키워드: College Immersion

검색결과 345건 처리시간 0.026초

국소한냉자극이 전신 및 국소혈액순환에 미치는 영향 -제 2 보 : 동계 및 하계의 계절변화에 따른 한냉반응- (Cold Pressor Response to Seasonal Variation in Winter and Summer)

  • 박원균;채의업
    • The Korean Journal of Physiology
    • /
    • 제17권2호
    • /
    • pp.93-101
    • /
    • 1983
  • 국소한냉자극이 전신 및 국소혈액순환에 미치는 영향과 동계에 있어서 한냉에 대한 적응을 관찰하기 위하여 동계 및 하계에 편균연령 21세의 남녀 대학생 각 60명 및 50명을 대상으로 $5^{\circ}C$의 냉수에 일측 손을 담구어 3분간 국소한냉자극을 가하였다. 침수 1, 2, 3분과 회복기 1, 3, 5분에 침수한 측과 침수 반대측에서 평균혈압, 분시심박수, 광전 모세혈관 맥박의 파고, 피부전기저항을 관찰하여 다음과 같은 결과를 얻었다. 국소한냉자극시 혈압은 증가하였고 하계에서 동계보다 더 큰 증가를 보였다. 회복기에 동계는 서서히 대조치로 회복되나 하계에는 대조치보다 유의하게 감소하였다. 분시심박수는 침수시 증가하며 하계에서 동계보다 더 증가하였고 회복기에는 동계 및 하계 모두 대조치보다 감소하였다. 광전 모세혈관 맥박의 파고는 동계에는 침수 및 침수 반대측 모두 감소하였으나 침수한 측에서 더 크게 감소하였으며 이는 침수한 측에 있어서 한냉의 국소효과에 기인한 것으로 보인다. 하계에는 동계보다 작은 감소를 보였으며 회복기에는 더 빠른 회복을 보여 대조치보다 증가하였다. 피부전기저항은 침수시 침수 반대측에서는 감소하나 침수한 측에서는 유의하게 증가하였다가 회복기에 서서히 감소하였다. 침수 반대측의 감소는 동통에 의한 반응이 한냉에 의한 반응에 첨가되어 나타난 것으로 보이며, 침수한 측은 한냉에 의한 국소효과가 크기 때문인 것으로 보인다. 이상으로 $5^{\circ}C$의 국소한냉자극시 전신적 반응은 한냉자극에 의한 동통성 stress에 기인한 반응이 우세한 것으로 생각되며 김 등$^{39)}$의 보고와는 달리 동계 및 하계의 반응의 차이는 계절에 따른 한냉자극에 대한 주관적 감각의 차이에 의한 것으로 동계에서 한냉기후에 의한 국소한냉자극의 적응현상은 나타나지 않는 것으로 사료된다.

  • PDF

Thermal cycling과 시효처리가 Glass-Ionomer 수복재의 인장강도에 미치는 영향 (EFFECT OF THERMAL CYCLING AND AGING ON THE TENSILE STRENGTH OF GLASS-IONOMER RESTORATIVE MATERIALS)

  • 백병주;김문현;이승영;이승익;김재곤
    • 대한소아치과학회지
    • /
    • 제26권4호
    • /
    • pp.677-687
    • /
    • 1999
  • 본 연구에서는 구강환경과 유사한 액상의 조건하에서의 온도변화가 광중합형 글래스아이오노머계 수복재의 인장강도에 미치는 영향을 평가하기 위해 대조군으로 2종의 재래형 glass ionomer를 선택하고 실험군으로 2종의 광중합형의 resin-modified glass ionomer와 2종의 polyacid-modified resin composite을 선택한 다음 수중에서의 thermal cycling과 시효처리를 행하였으며, 다음과 같은 결론을 얻었다. 1. 글래스아이오노머 수복재의 인장강도를 측정한 결과, polyacid-modified resin composite, resin-modified glass ionomer 그리고 재래형 glass ionomer 의 순으로 나타났다. 2. 인장강도는 30일간의 시효처리로 증가되는 경향을 보였다. 3. 재래형 glass ionomer 수복재의 인장강도는 thermal cycling 처리로 증가되는 경향을 보였으며, $37^{\circ}C$의 증류수 중에 1시간 침적한 군과 10,000회의 thermal cycling을 비교한 결과 유의한 차이로서 강도의 증가를 나타냈다(P<0.01). 4. thermal cycling 군의 인장강도는 DR군이 45.4MPa로 최대치를, FL군이 13.4MPa로 최소치를 나타냈으며, 각 군간의 통계적 유의성을 검증한 결과 polyacid-modified resin composite의 인장강도가 나머지 군과 유의한 차이를 보였다(p<0.05). 5. 특성강도는 DR군이 48.6MPa로 가장 높은 강도치를 보였으나 Weibull 계수는 CG군이 8.9로 가장 높은 값을 보여 시험재료 중에서 가장 작은 강도의 분산을 나타냈다.

  • PDF

구치부 복합레진의 인장강도에 관한 실험적 연구 (AN EXPERIMENTAL STUDY ON THE TENSILE STRENGTH OF POSTERIOR RESIN-BASED COMPOSITES)

  • 김재곤;이용희;양철희;백병주
    • 대한소아치과학회지
    • /
    • 제28권3호
    • /
    • pp.464-470
    • /
    • 2001
  • 1960년대 수복재로서 복합레진이 소개된 이래, 심미성이 우수하고 치질에 대한 접착성이 있는 복합레진이 전치부 수복용 재료로서 널리 사용되어 왔으며, 최근 레진과 필러의 개선에 의해 기계적 성질, 내마모성 등의 물리적 성질이 크게 증가하면서 구치부 수복용 재료로서도 점차 그의 응용이 확대되고 있지만, 높은 응력이 작용하는 구치부의 경우 그 사용이 제한적이고 임상적인 예후가 불확실하다는 단점이 있어왔다. 초기의 구치용 복합레진의 예후의 보고에 의하면 비교적 초기에 변연파절이 발현하고 있는 듯하다. 이런 원인으로써는 재료 자신의 강도 접착기법, 환경요인등 여러 가지 물성 이 복잡하게 영향하고 있다고 생각되어지기 때문에 간단히는 설명할수 없지만, 일반적으로 취성재료가 인장응력으로 파단하는 것을 생각하면 구치용 복합레진의 인장강도에 대해서 상세히 검사할 필요가 있다고 생각한다. 본 연구에서는 구치부 수복용 복합레진의 인장강도를 평가하기 위해 5종의 광중합 복합레진(Denfil(Vericom, Korea), P60(3M, U.S.A.), Unifil S(GC, Japan), Z100(3M, U.S.A.), Z250(3M, U.S.A.))을 시험재료로 선택하여 소형 인장시험편을 제작한 다음 thermal cycyling 및 과 시효처리를 시행한 후 직접인장시험법에 의해 인장강도를 측정하고 다음과 같은 결론을 얻었다. 1. P60의 인장강도는 타 실험군인 Denfil, Unifil S, Z100에 비해 유의성 있게 높은 수치를 보였다(p<0.05). 그러나 Z250과는 유의한 차이를 보이지 않았다(p>0.05). 2. Denfil은 타 실험군인 P60, Unifil S, Z100, Z250 모두에 비해 유의성 있게 낮은 수치를 보였다(p<0.05). 3. Unifil S와 Z100은 P60과 Z250보다 낮은 수치를 나타냈으나(p<0.05), Denfil보다는 증가된 수치를 나타냈다. (p<0.05) Unifil S와 Z100간의 유의한 차이는 없었다(p<0.05).

  • PDF

세균성(細菌性) 아가미병(病)에 실험적(實驗的)으로 감염(感染)된 무지개송어에 있어서 Flavobacterium branchiophila에 대한 전자현미경학적(電子顯微鏡學的) 연구(硏究) (Electron microscopic studies on Flavobacterium branchiophila in experimentally induced gill disease of rainbow trout)

  • 허강준
    • 대한수의학회지
    • /
    • 제32권3호
    • /
    • pp.381-387
    • /
    • 1992
  • 건강한 무지개송어의 치어와 실험적으로 세균성 아가미병을 감염시킨 무지개송어의 치어에 있어서 아가미 조직과 그 병원균인 Flavobacterium branchiophila에 대하여 주사형 전자현미경(SEM)과 투과형 전자현미경(TEM)으로 관찰하였다. F branchiophila는 길이 $5{\sim}8{\mu}m$, 폭 약$0.5{\mu}m$의, 2~3균체가 서로 연결된 길고 가는 장간균으로서 균체의 주위에는 다수의 선모(pili)를 갖고있었다. 세균성 아가미병의 초기병소는 초미세 형태학적으로 이차새변의 비후에 의해 시작되며 병원균은 아가미 표면과 일정한 거리를 유지하며 부착되어 있었다. 주사형 전자현미경의 관찰에서 건강한 물고기의 아가미 표면은 미로와 같은 모양과 미세 섬모상의 돌기로 특정지어 질 수 있는 상피세포가 보이나 실험적으로 감염된 아가미 표면에서는 새변의 선단에서 부터의 증생 융합과 함께 표면의 미세구조가 붕괴되어 잘 관찰되지 않았다. F branchiophila는 표면에 실뭉치와 같이 엉클어져 부착되어 있었으며 5% 식염처리후에는 그 형태가 일정치 않았다.

  • PDF

명태 FILLET 제조를 위한 냉동원료의 해동방법과 가공품의 재동결방법에 관한 연구 (FACTORS INVOLVED IN THAWING OF FROZEN ALASKA POLLACK AND REFREEZING OF THE FILLET)

  • 최위경;박영호;이강호;장동석;김무남
    • 한국수산과학회지
    • /
    • 제8권2호
    • /
    • pp.107-117
    • /
    • 1975
  • Alaska pollack caught in the Northern Pacific Ocean and frozen aboard vessel are skipped to the plant and processed into frozen fillets. In the present paper quality changes during thwaing, refreezing and storage at $-20^{\circ}C$ are discussed. Natural, running-water, vacuum and steam thawing were employed as thawing methods. And contact plate, air blast, immersion in dry ice-alcohol solution freezing and storage at $-5^{\circ}C$ were applied to refreeze the thawed fillets. As quality factors content of drip released, salt-extractable protein, VBN, DNA in the drip and pH were determined. In addition, bacteriological tests were also carried out along with the whole process. In thawing of round material, the vacuum thawing was more effective than any other method, resulting in drip, salt-extractable protein $(N\%)$, VBN and DNA as $4.4\%,\;1.82\%,\;16.21mg\%$ and $13.70\;{\mu}g/ml$, respectively. Storage at $-5^{\circ}C$ as refreezing method yielded lower in drip and DNA content but similar to or slightly higher in both salt-extractable protein and VBN, which might postulate that the quality of the frozen fillet depends not largely on the secondary freezing but on the conditions of thawing and primary freezing. It seemed that most of the bacterial flora in thawed fillet came from skin and viscera of fish, worker's hands, utensils and other processing facilities, since sanitary indicative bacteria were not detected in the frozen flesh of round Alaska pollack. Bacterial quality of fillet varied with thawing methods, vacuum thawing appeared more sanitative compared with other methods as natural, running-water, and steam thawing. Bacterial colonies isolated from the thawed fillet were composed of $73.8\%$ Gram negative rod shape, $4.9\%$ Gram positive rod shape, $18.0\%$ cocci, and $3.3\%$ yeast. Decreasing rate of coliform group of the fillet during the storage at $-20^{\circ}C$ for 30 days was more than $70\%$ and that of plate count was less than of coliform group.

  • PDF

Survival and In Vitro Development of Immature Bovine Oocytes Cryopreserved by Vitrification

  • Yang, Byoung-Chul;Im, Gi-Sun;Chang, Won-Kyong;Lee, Yun-Keun;Oh, Sung-Jong;Jin, Dong-Il;Im, Kyong-Sun;Lee, Chang-Kyu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제16권1호
    • /
    • pp.23-28
    • /
    • 2003
  • The present study was undertaken to investigate the effects of PVP concentration and exposure temperature to vitrification solution on the post-thaw survival, in vitro maturation and development of immature bovine oocytes (germinal vesicle stage). The vitrification solution (VS) consisted of 40% ethylene glycol (EG)+0.5 M sucrose (S)+10% FBS. PVP was added to VS: 0%, 5% or 10%. The cumulus-oocyte complexes (COCs) were diluted in VS as one step, after 2 min the COCs were loaded in straw and vitrified by direct immersion into liquid nitrogen. For thawing, the straws were plunged into $30^{\circ}C$ water bath for 10s. After thawing, the oocytes were diluted in 0.5 M (in DPBS with 10% FBS) sucrose solution for 5 min. The survival rate (FDA-test and trypan blue) of immature bovine oocytes was measured. The survival rate was higher in 5% PVP (91.5%) than in 0% (64.2%) or in 10% PVP (79.7%). The proportion of metaphase II formation was 69.35% in control (no vitrified COCs), 9.3% in 40% EG+0.5 M S+0% PVP and 21.05% in 40% EG+0.5 M S+5% PVP (p<0.05). The effect of room temperature ($25^{\circ}C$ for 10 min) and cold temperature ($4^{\circ}C$ for 10 min) on COCs were determined in this study. After IVF, the cleavage and blastocysts rate of oocytes exposed to room temperature and cold temperature in VS+5% PVP was significantly different (2 cell: 63.20% vs 37.97%, blastocysts: 18.40% vs 2.53%). The cleavage rates of frozen-thawed oocytes were 20.53% with PVP and 22.13% without PVP (p>0.05). Two out of 151 oocytes (1.32%) developed to blastocyst stage after frozen-thawed with 5% PVP (p>0.05). Development of oocytes after frozen-thawing to the 2 cell were not significantly affected with or without PVP following IVF. However, the vitrification of immature bovine oocytes with PVP maintained the ability to develop to the blastocyst stage after IVM-IVF and IVC, while no blastocysts were obtained from oocytes vitrified without PVP. These results suggested that PVP has a protective role for vitrification of immature bovine oocytes as far as survival is concerned, however, the protection was not sufficient enough to support blastocyst formation.

유기산을 이용한 전복박리 (Exfoliation of abalone, Haliotis discus hannai using organic acid)

  • 김위식;이시우;김정;최동익;오명주;황두진
    • 한국어병학회지
    • /
    • 제26권1호
    • /
    • pp.51-56
    • /
    • 2013
  • 전복은 수산용 항생제인 옥시테트라사이클린(Oxytetracycline, OTC)에 함유되어 있는 염산(hydrochloric acid, HCl)에 의해 부착판 (쉘타)으로부터 박리된다고 보고되어 있다. 본 연구에서는 전복박리에 OTC 및 HCl을 대신해서 사용될 수 있는 제제로서 유기산을 평가하였다. pH 2.6의 유기산 (사과산, 구연산, 젖산 및 개미산)에 노출된 전복은 67.6% 이상이 쉘타로부터 박리되었고, pH 2.3 이하의 유기산에서 91.7% 이상이 박리되었다. OTC의 경우, pH 2.6에서 25.9%가 박리되었고 pH 2.3 이하에서 74.1% 이상이 박리되었다. 이상의 결과, 유기산은 동일한 pH의 OTC 보다 전복박리 효과가 뛰어난 것으로 확인되었다. 유기산의 노출 시간 (10-30초)에 따른 전복의 영향을 평가한 결과에서는 pH 2.3의 유기산 (개미산 제외)에 10초간 침지된 전복은 5분 이내에 회복되었으나 30초간 노출될 경우 12분 이내에 회복되었다. 더욱이 pH 2.1에서 30초간 노출될 경우, 회복하는데 최소 15분 45초 이상이 소요되는 것으로 나타나 전복은 유기산의 pH가 낮아질수록 또는 처리시간이 길어질수록 회복 시간이 늦어지는 것으로 확인되었다. 이상의 결과로 전복박리 방법으로 유기산은 OTC 및 HCl을 대신해서 사용될 수 있을 것으로 사료되나 pH의 농도 및 처리시간에 있어서는 각별한 주의가 요구된다.

시뮬레이션 실습에서 간호학생의 객관적 응급간호 임상수행능력에 영향 미치는 요인 (Factors Influencing Objective Emergency Nursing Performance of Nursing Students on Simulation Practice)

  • 최은희
    • 한국산학기술학회논문지
    • /
    • 제21권3호
    • /
    • pp.296-303
    • /
    • 2020
  • 본 연구의 목적은 간호학생의 객관적 응급간호 임상수행능력에 영향 미치는 요인을 확인하기 위함이다. 영향 변수로는 간호학생의 일반적 특성과 함께 시뮬레이션 관련 변수로 객관적·주관적 임상수행능력, 비판적 사고성향, 학습 성과 성취 정도, 시뮬레이션 만족도, 시뮬레이션 자신감과 시뮬레이션 몰입도가 포함되었다. 대상자는 Y대학의 간호학과 4학년 92명이었으며 대상자들은 시뮬레이션 실습 전 연구에 대한 전반적인 설명과 함께 연구참여에 대한 동의서를 작성하였다. 일반적 특성과 시뮬레이션 관련 변수들은 학생들의 자가설문형태로 자료를 수집하였으며 객관적 임상수행능력은 간호학생들이 시뮬레이션 상황에서 간호수행을 하는 동안 평가자가 수행평가표에 따라 평가하였다. 학습성과 성취는 시뮬레이션 실습이 끝난 후 디브리핑 시간 동안 학생이 작성한 보고서를 평가자가 학습성과 평가도구를 이용하여 평가하였다. 자료 분석은 SPSS/WIN 22.0 Program을 이용하여 실수, 백분율, 평균, 표준편차, X2-test, one-way ANOVA, Pearson correlation, progressive regression으로 분석하였다. 연구결과, 평가자에 의해 측정된 객관적 응급간호 임상수행능력은 임상실습만족도와 부정적인 상관관계가 있었으며(r=-.31, p=.005) 간호학생이 평가한 주관적 응급간호 임상수행능력과 긍정적인 상관관계가 있었다(r=.23, p=.036). 회귀분석 결과, 설명력은 12%로 나타나 시뮬레이션 상황에서 응급간호 임상수행능력을 전반적으로 설명하기에는 다소 부족하였으므로 추후 연구에서는 응급간호 임상수행능력에 영향을 미칠 수 있는 다른 요인에 대한 탐색이 요구된다.

Studies on Manufacturing Wood Particle-Polypropylene Fiber Composite Board

  • Lee, Chan-Ho;Eom, Young-Geun
    • Journal of the Korean Wood Science and Technology
    • /
    • 제29권3호
    • /
    • pp.47-58
    • /
    • 2001
  • For finding both ways of recycling the wood and plastic wastes and solving the problem of free formaldehyde gas emission through manufacturing wood particle-polypropylene fiber composite board without addition of formaldehyde-based thermosetting resin adhesive, control particleboards and nonwoven web composite boards from wood particle and polypropylene fiber formulation of 50 : 50, 60 : 40, and 70 : 30 were manufactured at density levels of 0.5, 0.6, 0.7, and 0.8 g/$cm^3$, and were tested both in the physical and mechanical properties according to ASTM D 1037-93. In the physical properties, control particleboard had significantly higher moisture content than composite board. In composite board, moisture content decreased with the increase of target density only in the board with higher content of polypropylene fiber and also appeared to increase with the increase of wood particle content at a given target density. Control particleboard showed significantly greater water absorption than composite board and its water absorption decreased with the increase of target density. In composite board, water absorption decreased with the increase of target density at a given formulation but increased with the increase of wood particle content at a given target density. After 2 and 24 hours immersion, control particleboard was significantly higher in thickness swelling than composite board and its thickness swelling increased with the increase of target density. In composite board, thickness swelling did not vary significantly with the target density at a given formulation but its thickness swelling increased as wood particle content increased at a given target density. Static bending MOR and MOE under dry and wet conditions increased with the increase of target density at a given formulation of wood particle and polypropylene fiber. Especially, the MOR and MOE under wet condition were considerably larger in composite board than in control particleboard. In general, composite board showed superior bending strength properties to control particleboard, And the composite board made from wood particle and polypropylene fiber formulation of 50 : 50 at target density of 0.8 g/$cm^3$ exhibited the greatest bending strength properties. Though problems in uniform mixing and strong binding of wood particle with polypropylene fiber are unavoidable due to their extremely different shape and polarity, wood particle-polypropylene fiber composite boards with higher performance, as a potential substitute for the commercial particleboards, could be made just by controlling processing variables.

  • PDF

참깨발병 품종저항성 검정방법 연구 (An Evaluation Method for Sesame (Sesamum indicum L.) Resistance to Phytophthora nicotianae var. parasitica)

  • Seong Ho, Choi;Eui Kyoo, Cho;Young Am, Chae
    • 한국작물학회지
    • /
    • 제32권2호
    • /
    • pp.173-180
    • /
    • 1987
  • 본 시험은 참깨 발병(병원균 : Phytophthora nicotianae var. parasitica)에 대한 품종저항성 검정방법 확립을 위해 실시하였다. 공식작물의 묘령, 접종방법, 토양수분상태 및 접종원의 농도는 공시한 중도저항성계통 B-67, IS 103과 나병성계통 수원9호, 수원 2006 모두의 병진전속도와 발병심도에 영향을 주는 것으로 나타났다. 그러나, 파종후 20일된 유묘에 1 $m\ell$당 200개 포자상의 접종원을 폿트(8$\times$16.7$\times$7.2cm)당 10$m\ell$씩 토양표면에 접종한 후 저면관수로 토양수분을 포화상태로 유지하였을 때 계통간 저항성의 차이를 갈 볼 수 있었다. 묘령 70일의 성묘를 사용하였을 때는 토양접종을 하였을 때나 분무접종을 하였을 때 모두 계통간 저항성 차이를 잘 볼 수 있었다. 전술한 유묘검정방법에 의해 이병성계통인 수원2006는 이병주율로는 100%, 발병심도로는 최대치인 9.0을 보였다. 반면에 중도저항성계통인 B- 67은 이병수율로는 20%, 발병심도로는 1.7을 보였다. 발병심도는 0에서 9까지 지수화하여 나타내었다. 예를 들면, 발병심도 0은 병징이 없는 상태, 5는 지면부 줄기가 변색된 경우, 9는 잎마름증상과 함께 줄기변색이 지면부로 부터 10cm 이상인 경우이다. 품종간 저항성의 차이는 병총면적률로도 조사를 하였으며, 이 결과는 발병심도로 조사한 검정결과와 잘 일치하였다.

  • PDF