• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.1-12
• /
• 2010

Well production by a riverbank filtration facility with multi-radial collector well systems in Jeungsan-ri, Changnyeong gun, Korea was evaluated. In this study, the drawdown at collector wells due to pumping and groundwater inflow rates along the horizontal arms of the collector wells were computed through numerical simulations. Sensitivities of the well production to hydraulic conductivity and well flow coefficient, which represents the resistance to the flow from the aquifer to the horizontal arms, were analyzed. Simulation results showed that, with given proposed pumping rate conditions, the drawdown in the caisson exceeded maximum drawdown constraints in the study site and the adjustment of the pumping rate at each well is needed. The drawdown is affected by the hydraulic conductivity of the main aquifer and the well flow coefficient, which means the profound field investigation of the study site is needed to accurately estimate the efficiency of riverbank filtration through radial collector wells.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.167-173
• /
• 2007

This study analyzed by simulation using TRNSYS as well as by experiment on the solar district heating system installed for the first time for the district heating system in Bundang. Simulation analysis using TRNSYS focused on the thermal behavior and long-term thermal efficiency of solar system. Experiment carried out for the reliability of simulation system. This solar system where the circuits of two different collectors, flat plate and vacuum tube collector, are connected in series by a collector heat exchanger, and the collection characteristics of each circuit varies. Therefore, these differences must be considered for the system's control. This system uses variable flow rate control in order to obtain always setting temperature of hot water by solar system. Specifically, this is a system that heats returning district heating water (DHW) at approximately $60^{\circ}C$ using a solar collector without a storage tank, up to the setting temperature of approximately $85{\sim}95^{\circ}C$ To realize this, a flat plate collector and a vacuum tube collector are used as separate collector loops. The first heating is performed by a flat plate collector loop and the second by a vacuum tube collector loop. In a gross collector area basis, the mean system efficiency, for 4 years, of a flat plate collector is 33.4% and a vacuum tube collector is 41.2%. The yearly total collection energy is 2,342GJ and really collection energy per unit area ($m^2$) is 1.92GJ and 2.37GJ respectively for the flat plate vacuum tube collector. This result is very important on the share of each collector area in this type of solar district heating system.

• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.59-67
• /
• 2012

In this paper, performances of solar hot water supply systems are parametrically analyzed with the variations of solar collector area, slope of collector and volume of storage. All simulations are conducted by using TRNSYS computer program. Average solar fractions, collector efficiencies and temperatures of storage are investigated monthly as well as annually. For system analysis, the maximum value of monthly average solar fractions has a limitation of 90 percent. As a result, the designed solar thermal system with $6m^2$ collector area, $50^{\circ}$ slope and $0.36m^2$ storage volume could provide almost an annual average solar fraction of 72 percent. By increasing the storage volume to $0.42m^2$, the annual solar fraction of system increases up to 73 percent.

• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.21-27
• /
• 2008

In this study, the design of the solar heating system for district heating as well as it's operating characteristics and the performance analysis was carried out. This solar district heating system was composed of two different types of solar collector circuit, flat plate and vacuum tube solar collector, in a system. This system supply constant temperature of hot water without solar buffer tank. For this, the proportional(variable flow rate) control was used. The experimental facility for this study was used the Bundang district solar heating system which was installed in the end of 2006. The operating characteristics and behaviour of each collector circuits are investigated especially for the system design and control. The yearly solar thermal efficiency is 47.5% on the basis of aperture area and 39.8% on the basis of gross area of collector. As a result this solar heating system without solar buffer tank and with proportional controller was testified a very effective and simplified system for district heating. It varied especially depend on the weather condition like as solar radiation and ambient temperature.

• 한국태양에너지학회 논문집
• /
• 제23권2호
• /
• pp.51-58
• /
• 2003

PSHC(Prismatic Solar Hybrid Collector) is a passive solar system composed of prismatic acrly glazing, glazing and ventilating fan. This PSHC system is applied to effectively reduce heating ventilation load as well as lighting load. But so far no method appraising thermal performance of this PSHC system has been developed yet. To assess thermal performance of the PSHC system, a prototype PSHC experimental facility and TRNSYS subroutine type-205 model have been developed in Korea Institute of Energy Research (KIER). The results indicated that l)TRNSYS empirical model of PSHC has been properly modeled with actual performance data, 2)a more reliable source of weather data such as NASA and KIER weather station have been also obtained, and therefore, 3)the annual energy performance of PSHC could be assessed based on this proposed TRNSYS model.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.17-22
• /
• 2007

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. The extraction of hot air from the space will enhance the performance of BIPV systems. The solar collector utilizing these two aspects is called PV/T(photovoltaic/thermal) solar collector. This paper compares the experimental performance of two different types of air type PV/T collector units: the base case of a collector unit with 10cm gap for forced ventilation and the other unit with copper pin attached to PV module to enhance its thermal performance. The experimental results shows that the base case unit had the overall efficiency of 41.9% and the improved unit with copper pin attached to PV module had 50.1% efficiency. For these air type PV/T units, the forced ventilation of the air space improved the electrical performance as well as the thermal performance.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제14권1호
• /
• pp.1-10
• /
• 2009

지하수 유동 수치 모사 프로그램 (FEFLOW 5.1)을 이용하여 수평 방사형 집수정 취수에 따른 강변여과 지역의 지하수 유동을 분석하였다. 양수량, 대수층 두께, 취수정과 하천 사이의 이격거리, 하천 바닥의 투수 능력(Conductance)등의 조건 변화에 따른 집수정 인접 대수층의 수위강하가 계산되었다. 이들 조건 변화에 따라 지하수위 강하는 뚜렷한 변화를 보여주었다. 민감도 분석 결과, 대수층의 두께와 취수정과 하천 사이의 이격거리가 하천 바닥의 수리 전도에 비해 지하수위 강하에 더 민감하게 영향을 주는 것으로 평가되었다. 이러한 결과는 수평 방사형 집수정을 통한 강변여과 취수 가능지역을 선정하고 그 개발량을 추정할 때, 충적 대수층의 두께와 분포 특성이 중요한 요소임을 시사한다. 또한 FEFLOW의 1차원 선형 불연속 특징 요소를 활용한 수치 모사는 효과적으로 수평 방사형 집수정의 정량 평가와 강변여과 현장의 개발 가능량 추정을 할 수 있는 도구임이 밝혀졌다.

• 대한환경공학회지
• /
• 제27권12호
• /
• pp.1305-1310
• /
• 2005

하상여과에서 집수관의 최적 설계를 위한 방편으로 여러 개의 모래통을 이용하여 모형 집수관 실험을 수행하였다. 집수정의 수위, 집수관의 직경, 집수관의 길이, 그리고 모래의 투수계수를 변화시키면서 모형 집수관을 운영하였으며, 집수관 표면에서의 잔류 수두와 집수관 각 부위에서의 여과수 유입율, 그리고 집수정에서의 산출유량을 측정하였다. 실험결과 모래층에서의 저항에 비해 집수관에서의 저항이 작아서 집수관 표면에서의 잔류수두가 수평에 가까운 경우 효율적인 집수관임을 알 수 있었다. 집수관의 여과수 유입율은 집수정에 근접할수록 지수함수적으로 증가하였고, 집수관의 직경이 작을수록 그리고, 대수층의 투수계수가 클수록 이 지수함수의 기울기는 증가하였다. 집수관의 길이와 직경이 증가하면 산출유량은 증가하지만 그 한계생산성은 감소하였다. 효율적인 하상여과를 위해서는 집수관에서의 축방향 유속을 줄이는 것이 중요함을 알 수 있었으며, 본 연구의 조건에서는 이 유속이 1 m/sec를 넘을 경우 우물의 효율이 크게 감소함을 알 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제34권3호
• /
• pp.30-41
• /
• 2014

PV/Thennal combined system is a solar energy device that uses photovoltaic module as thermal absorption plate, producing thermal energy as well as electricity which can be utilized in buildings. The system removes heat from PV module through air or liquid and its efficiency will vary dependant on the thermal medium. The heat as the forms of hot air or hot water can be utilized for building use, like space heating and hot water. A significant amount of research and development on hybrid PV/thermal(PVT) collectors has been carried out. This study reviews literature on the research of air-based hybrid PVT collectors in terms of their design and energy performance.

• Advances in Energy Research
• /
• 제8권3호
• /
• pp.137-144
• /
• 2022

This study presents an experimental investigation of conventional and enhanced receiver tube performance for the application of a concentrated parabolic trough collector (CPC). The CPC system is fabricated and tested for the conventional and enhanced receiver tubes. The experiments were performed on both tubes for the change of flow rates. The temperature rise of the tube surface, as well as working fluid, were monitored for varying flow rates. The results were compared and discussed in view of enhanced CPC system performance. The results exhibited that the temperature rise of the working fluid passing through the tube was more in the case of the enhanced tube compared to the conventional receiver tube under the same flow rates.