• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1983.10a
• /
• pp.118-123
• /
• 1983

A minicomputer system with the purpose of automations the operations of a Repair Service Bureau is described. SLMOS automates three major functional areas-administration, testing, and report senerations In the administration of repair sevice SLMOS performs a database maintenance functions alons with trouble collection and tracking. Trough ALT, automated testing of customer lines is performed, and the results of the test are utilized to dertermine the action taken to effect a repair. Certain problem areas may be detected and corrected by using the reports senerated by Trouble Report statics and Analysis System.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.149-155
• /
• 2012

SSD is a storage device of having high-performance controller and cache buffer and consists of many NAND flash memories. Because NAND flash memory does not support in-place update, valid pages are invalidated when update and erase operations are issued in file system and then invalid pages are completely deleted via garbage collection. However, garbage collection performs many erase operations of long latency and then it reduces I/O performance and increases wear leveling in SSD. In this paper, we propose a new method of de-duplicating valid data and recycling invalid data. The method de-duplicates valid data and then recycles invalid data so that it improves de-duplication ratio. Due to reducing number of writes and garbage collection, the method could increase I/O performance and decrease wear leveling in SSD. Experimental result shows that it can reduce maximum 20% number of garbage collections and 9% I/O latency than those of general case.

• Korean Management Science Review
• /
• v.9 no.1
• /
• pp.31-40
• /
• 1992

The size of software collection at any organization is increasing rapidly with the use of computer becomes popular for various applications. This trend points out the importance of proper 'catalog'or 'directory' for software collections, however, only 'title list' is found in practice. The problem of no proper directory with software collection would be more serious than the problem with book collection since browsing is not possible with softwares. Many of the expensive softwares will be a waste of money to purchase and to hold if no catalog about them is provided. In this paper the difficulties in applying AACR2 to software cataloging and the most important characteristic of computer software are discussed as well as presenting the necessity of localized information due to the requirement of a machine to be used, the difficulty using subject-based-call-number scheme, an expected way of searching software to design a location indicator, software qualifications to be cataloged, and so on. In addition, an analysis of randomly selected softwares after a cataloging practice is followed.

• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.79-84
• /
• 2017

In a cognitive radio network (CRN), cognitive radio users (CUs) should be powered by a small battery for their operations. The operations of the CU often include spectrum sensing and data transmission. The spectrum sensing process may help the CU avoid a collision with the primary user (PU) and may save the energy that is wasted in transmitting data when the PU is present. However, in a time-slotted manner, the sensing process consumes energy and reduces the time for transmitting data, which degrades the achieved throughput of the CRN. Subsequently, the sensing process does not always offer an advantage in regards to throughput to the CRN. In this paper, we propose a scheme to find an optimal policy (i.e., perform spectrum sensing before transmitting data or transmit data without the sensing process) for maximizing the achieved throughput of the CRN. In the proposed scheme, the data collection period is considered as the main factor effecting on the optimal policy. Simulation results show the advantages of the optimal policy.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.98-104
• /
• 2003

While the impact or internet on our everyday life keeps increasing, the internet users are turning toward the value added information only that suits their purpose instead of just wandering over a sea (pool) or information. Although it is easy to locate the information using various search engines. we still finds it time and cost consuming to update the existing information or to add similar Information. There are several portal sites managed by each industrial types or associations/organizations for the purpose or strengthening the competitiveness or small and medium-sized enterprises And currently, tremendous manpower and expenses are put into the selection and quality improvement or information to satisfy the needs toward the high qualify information by the specialized users in their fields collection and updating or the information is partially available manually during He period or budget allocation by the government it becomes problematic, however, to continue this service when the project expires. This report presents the system for the information collection, analysis and classification of portal sites operated for the special purposes and automatic upload to the proper sites. In addition. expression or web robots and application of robots and several information types are suggested which will eventually accomplish currency or information and automatic updates and addition or documents with the least expenses or maintenance.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.3
• /
• pp.111-118
• /
• 2001

This study was performed to analyze collection parameters for food wastes, which were used to estimate man power and vehicles required to collect those. For this purpose, collection activities were separated into unit operations, such as a pickup, a haul and at-site, and design data that can be used generally were developed by survey and interpretation. In case of a detached dwelling area, the pickup time to collect 1ton of food wastes(Phcs) was $3.3man{\cdot}hour$ and haul time was 22.4km/hour. At-site time of a collection vehicle to load 2.5ton of food wastes was 5minutes and that time was varied according to the loading quantity of vehicles. The estimation of collection time(Thcs), required to move 2.5ton of food wastes from a pickup location to a treatment facility in the same condition for vehicles and man power, showed that Thcs for an apartment area was 3.03hours and for a detached dwelling area was three times as much as that of for the apartment area. More data should be required to evaluate both typical variables associated with collection activities and the variables related to particular district types.

• Particle and aerosol research
• /
• v.19 no.3
• /
• pp.63-76
• /
• 2023

An electrostatic precipitator (ESP) has a low pressure drop and a high collection efficiency but its collection efficiency can be reduced due to dust accumulation on the collection plates during long-term operations. In order to maintain the initial dust collection efficiency, it is necessary to periodically clean the collection plates. The common cleaning methods are using physical impacts or water sprays. These cleaning methods can lead to damage to the collection plate or generate wastewater. Herein, we implemented an electrodynamic screen (EDS) for ESP cleaning and evaluated its surface cleaning performance of particles. The EDS is an electrostatic system that can electrostatically repel particles on surfaces, allowing it to clean the ESP without causing damage and wastewater generation. Our evaluation included the analysis of the effects of AC voltage characteristics, electrode configuration and environmental conditions on the cleaning performance of the EDS with the aim of achieving effective surface cleaning. It has been demonstrated that activating the EDS cleans up to 65% of the particles on the surface, which indicates about 94% of our target cleaning zone.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.2
• /
• pp.62-67
• /
• 2009

LOSA is a flight safety program that analyses human errors in normal operations. Trained pilot observers monitor the normal flights at the observer seat. LOSA is a proactive non jeopardy data collection tool using threat and error management(TEM) as a framework. With the analysis of crew behaviors through LOSA with The LOSA collaborative(TLC), the airlines can identify the behaviors of the crew during normal operations. The major objective of LOSA is to measure how the crew manage threats, errors and undesired aircraft deviations in the cockpit on day to day operations. The airlines are able to set up effective TEM training with practical six generation Crew recourse management(CRM) with data of error from LOSA instead of theoretical CRM courses. The Airlines can use TEM as an integral part of a Safety Management System(SMS) and uses monitoring and cross-checking skills in the flight operations to manage threats and errors effectively when we know the errors we make in the cockpit on daily operation. The result of LOSA indicates that the error detection rate should be enhanced since around the half of the errors went undetected. The areas which should be focused for enhancing the error detection are monitor, cross-check, the management of workload, automation and taxiway/ runway to manage errors effectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.121-130
• /
• 2017

NAND flash memory has advantages of non-volatility, little power consumption and fast access time. However, it suffers from inability that does not provide to update-in-place and the erase cycle is limited. Moreover, the unit of read/write operation is a page and the unit of erase operation is a block. Therefore, erase operation is slower than other operations. The AGC, the proposed garbage collection policy focuses on not only garbage collection time reduction for real-time guarantee but also wear-leveling for a flash memory lifetime. In order to achieve above goals, we define three garbage collection operating modes: Fast Mode, Smart Mode, and Wear-leveling Mode. The proposed policy decides the garbage collection mode depending on system CPU usage rate. Fast Mode selects the dirtiest block as victim block to minimize the erase operation time. However, Smart Mode selects the victim block by reflecting the invalid page number and block erase count to minimizing the erase operation time and deviation of block erase count. Wear-leveling Mode operates similar to Smart Mode and it makes groups and relocates the pages which has the similar update time. We implemented the proposed policy and measured the performance compare with the existing policies. Simulation results show that the proposed policy performs better than Cost-benefit policy with the 55% reduction in the operation time. Also, it performs better than Greedy policy with the 87% reduction in the deviation of erase count. Most of all, the proposed policy works adaptively according to the CPU usage rate, and guarantees the real-time performance of the system.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.1-8
• /
• 2017

In this paper, we propose a new hybrid wear leveling technique for NAND Flash memory, called Time-Aware Wear Leveling (TAWL). Our proposal prolongs the lifetime of NAND Flash memory by using dynamic wear leveling technique which considers the wear level of hot blocks as well as static wear leveling technique which considers the wear level of the whole blocks. TAWL also reduces the overhead of garbage collection by separating hot data and cold data using update frequency rate. We showed that TAWL enhanced the lifetime of NAND flash memory up to 220% compared with previous wear leveling techniques and our technique also reduced the number of copy operations of garbage collections by separating hot and cold data up to 45%.