• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.85-90
• /
• 2001

This work presents experimental results of filter media test by using particles from $0.02\;to\;0.6{\mu}m$ in diameter and by applying different charging states. In order to investigate the electret filter performance, the collection efficiency and the pressure drop of filter were measured. The face velocities of test filters varied from 2.4 to 20.4 cm/s. Another experiment setup for the cartridge cabin air filter was used to get an collection efficiency in submicron region. After charging level of electret filter severely decreased, the change of collection efficiency was verified. Experimental results show that the reliability of electret filters can be poor in some conditions.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.1
• /
• pp.68-69
• /
• 1996

The isoprenoid quinone composition of Leclercia adecarboxylata KCTC $1036^T$ was determined by using high-performance liquid chromatography. L. adecarboxylata KCTC $1036^T$ are characterized by their production of both ubiquinone-7, ubiquinone-8 and menaquinone-8 as major quinones. It is clear that the analysis of isoprenoid quinone profiles provides a new criterion of great promise for identifying Leclercia strains.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2009

This study was carried out to investigate the effects of collection time on the physical characteristics, Nutritive value, digestibility and palatability in rice straw. Collection time of rice straw after the rice harvest was allocated into nine treatments: T1 (10 days), T2 (25 days), T3 (40 days), T4 (55 days), T5 (70 days), T6 (85 days), T7 (100 days), T8 (115 days) and T9 (130 days). The results are summarized as follow: Plant length, leaf length and green degree were decreased with prolonging collection time. Mold distribution and dry matter loss were increased with prolonging collection time. Crude protein and crude fat were decreased with prolonging collection time, crude fiber were increased with prolonging collection time. But crude ash showed multifarious. In situ dry matter digestibility was decreased with prolonging collection time. Palatability of Hanwoo, Holstein and deer was decreased with prolonging collection time. The results of this study indicate that good rice straw collection time would be recommendable during the from 10 days to 40 days after rice straw harvest.

• Journal of the Korean Society for Library and Information Science
• /
• v.22
• /
• pp.109-141
• /
• 1992

University library must have a substantial collection development policy, by which the short and long term plannings are set up to meet the goals of university education and to support university function. Only when university library organizes collection building based on the well-planned policy, can it establish the systematic collection building, which can satisfy users, support continuity of work, use budget efficiently, and solve the space problem by with-drawing the materials. But most Korean university libraries, contrary to many foreign cases, don't have proper systematic collection development policy or guideline that controls overall library work from planning the collection of materials to evaluating and preserving them. Questionaire on whether university library has collection development policy or guideline was answered positively by only 6 cases out of 57 cases, which is just 10.5 percent. Even in cases that they have a guideline, the content of the copied guideline they sent was confined to acquisition, which is just a part of collection development. Collection development is a statement needed to set up long and short term plannings in consideration of the aims of the library and the needs of users and to shape and manage the library collection systematically. With the above conception and definition, we try to make a proper collection development policy and guideline for the Korean university libraries. Here we must define the object of the university. Object of university is to have good curriculum, good courses, research activities on the part of the faculty, enlargement of graduate school, and establishment of various institutes, etc. And in guideline, selector, method of selection, level of selection and arrangement of budget, etc. must be described concretely in its contents. Since collection development policy and guideline of Korean university libraries should concern their situation, we must confer with the result of the survey and analysis on the matter of collection determination. Here the contents include the priority of materials to be collected, method of collecting materials, arrangement of budget, and others. The purpose of this study is to develop a tenative collection development guideline in reference to the Jeonju University Library by means of analyzing the guiding principle, contents of the guideline, and present conditions of the Korean university libraries. The systematic collection development based on the Guideline for Collection Development of the Korean University Library, can offer a satisfactory service to the users of the university community, and also contribute to the development of the university itself as well as the university library.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.6
• /
• pp.1-11
• /
• 2015

Recently, NAND flash memories are used for storage devices because of fast access speed and low-power. However, applications of FTL on low power computing devices lead to heavy workloads which result in a memory requirement and an implementation overhead. Consequently, studies of B+-Tree on embedded devices without the FTL have been proposed. The studies of B+-Tree are optimized for performance of inserting and updating records, considering to disadvantages of the NAND flash memory that it can not support in-place update. However, if a general garbage collection method is applied to the previous studies of B+-Tree, a performance of the B+-Tree is reduced, because it generates a rearrangement of the B+-Tree by changing of page positions on the NAND flash memory. Therefor, we propose a novel garbage collection method which can apply to the B+-Tree based on the NAND flash memory without the FTL. The proposed garbage collection method does not generate a rearrangement of the B+-Tree by using a block information table and a proxy block. We implemented the B+-Tree and ${\mu}$-Tree with the proposed garbage collection on physical devices with the NAND flash memory. In experiment results, the proposed garbage collection scheme compared to greedy algorithm garbage collection scheme increased the number of inserted keys by up to about 73% on B+-Tree and decreased elapsed time of garbage collection by up to about 39% on ${\mu}$-Tree.

• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.159-164
• /
• 2011

This study was performed in order to determine optimum flushing solution using the direct embryo collection (DEC). Donors, at random stages of the estrous cycle, received a CIDR. 7 days later, 200 mg FSH was treated with 40, 30, 20, 10 mg FSH levels in declining doses twice daily by intramuscular injection for 4 days. On the 3$^{rd}$ day administration of FSH, 25 mg $PGF_2{\alpha}$ was administered and CIDR was withdrawn. After FSH injections were complete, donors were artificially inseminated twice at 12 hr intervals. The donor cattle received 250 ${\mu}g$ GnRH at time of 1$^{st}$ insemination and embryos were recovered 8 days after the 1$^{st}$ insemination. Embryo collection from superovulated donors were performed to flushing by DEC and conventional method. As a results, the average number of recovered embryos were significantly higher as 19.1${\pm}$1.40 with DEC method than 12.0${\pm}$0.44 with conventional embryo collection method, respectively (p<0.05). Also, The average number of transferable embryos were significantly higher (p<0.05) as 15.8${\pm}$1.72 with DEC method than 6.9${\pm}$0.35 from conventional embryo recovery procedures. Meanwhile, number of recovered embryos and number of recovered transferable embryos following the number of flushing times until 6${dr}$ flushing were significantly higher as 8.6${\pm}$0.53 and 8.6${\pm}$0.53 from 2$^{nd}$ flushing time than other groups (p<0.05). No. of Ear. B stage embryos were significantly higher as 3.9${\pm}$0.90 and 3.9${\pm}$0.90 with 2$^{nd}$ flushing time in total collected embryos and transferable embryos (p<0.05). Com M stage embryos were significantly higher as 3.7${\pm}$1.00 in 2$^{nd}$ flushing time and as 2.2${\pm}$0.76 in 3$^{rd}$ flushing time for recovered embryos (p<0.05). In transferable embryos, Com. M stage embryos were significantly higher (p<0.05) as 3.7${\pm}$1.00 in 2$^{nd}$ flushing time and as 2.2${\pm}$0.76 in 34$^{dr}$ flushing time, also. No. of degradation embryos was significantly higher as 2.2${\pm}$0.72 in 5${rd}$ flushing time, On the other hand, degradation embryos was not observed in transferable embryos (p<0.05). In conclusion, these results suggest that DEC method should effective methods for production of in vivo embryos using less flushing solution following perform until 4$^{rd}$ flushing time than conventional embryo collecting method. Also, it might be effectively collection of transferable embryos following more less procedure times compared to conventional embryo recovery methods.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.168-177
• /
• 2006

Thirty-nine strains of Colletotrichum gloeosporioides and 5 strains of C. acutatum stored in Korean Agricultural Culture Collection(KACC) were re-identified based on molecular characteristics of ribosomal internal transcribed spacer(ITS) and partial $\beta$-tubulin gene and cultural characteristics on potato dextrose agar(PDA) and Benomyl-added PDA. As the results, 19 strains were identified as C. acutatum with 13 strains of group A2, 5 strains of group A3, and 1 strain of group A4. In addition, 20 strains were identified as C. gloeosporioides with 18 strains of ribosomal DNA group(RG) 4 and 2 strains of RG6. The rest were identified as C. boninense RG5(2 strains), C. coccodes RG2(2 strains), and C. dematium RG12(1 strain). Out of domestic 31 strains, 12 strains were identified as C. acutatum A2, one strain as C. acutatum A3, 14 strains as C. gloeosporioides RG4, 2 strains as C. gloeosporioides RG6, one strains as C. boninense RG5 and one strain as C. dematium RG12. We also discussed taxonomy of C. gloeosporioides and C. acutatum and composition of C. gloeosporioides/C. acutatum isolates from major crops in Korea.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.897-906
• /
• 2007

Effect of seawater temperature (temperature) on the production of anchovy, Engraulis japonica and laver, Porphyra tenera Kjellman, were investigated in the eastern part of South Sea of Korea (ESS). Bimonthly temperature data (Feb., Apr., Jun., Aug., Oct., Dec.) from 1980 to 2002 were collected from Korean Oceanographic Data Center (KODC) and monthly anchovy catch and laver production from 1980 to 2002 were used from published sources by the Ministry of Maritime Affairs & Fisheries, Korea. Effects of temperature on the two organisms were examined in four cases. In case of lower anchovy catch and higher laver production (1993), temperature during main spawning season of anchovy was about $0.2-0.6^{\circ}C$ lower than normal condition, and temperature during seed collecting season of laver in Namhaedo, Kojedo went down below $22.0^{\circ}C$. In case of higher anchovy catch and higher laver production (1995), optimum temperature for catch was formed in main fishing ground, temperature for seed collection was lower than $22.0^{\circ}C$, In case of lower anchovy catch and lower laver production (1996), temperature for spawning and catch was about $0.6-1.6^{\circ}C$ lower than normal condition, and temperature during seed collection in nursery was about $0.5-1.0^{\circ}C$ higher than optimum temperature for seed collection. In case of higher anchovy catch and lower laver production (1998), temperature during main fishing and spawning season was about $1.0-1.8^{\circ}C$ higher than normal condition, and temperature during laver seed collection in nursery was $1.5^{\circ}C$ higher than optimum temperature for seed collection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.496-500
• /
• 2007

Holstein cow ovaries obtained at a slaughterhouse were used to study the influence of the oocyte collection methods (slicing, puncture, aspiration I and II) on recovery efficiency and subsequent in vitro maturation and embryonic development competence of immature oocytes recovered. In the slicing method, the whole ovarian was chopped into small pieces with a surgical blade. In the puncture method, the whole ovarian surface was punctured by 18-g needle. In other 2 aspiration methods, collected oocytes by aspirating from the visible follicles using an 18-g needle attached to a 5 ml syringe (aspiration I) or using a constant negetive pressure (-80 mmHg) with a vacuum pump (aspiration II). The oocytes were classified into 4 classes on the basis of the morphology of cumulus cells and cytoplasmic appearance of oocyte. Slicing ($9.6{\pm}0.4$) and puncture ($9.7{\pm}0.4$)yielded a larger number of oocytes per ovary than other two aspiration methods (aspiration I and II were $5.8{\pm}0.3$and $5.6{\pm}0.4$, respectively) (p<0.05). The number of the highest quality oocytes (grade A) per ovary was significantly higher in slicing ($4.2{\pm}0.2$) and puncture ($4.6{\pm}0.1$) methods than in other methods (aspiration I and II were $1.2{\pm}0.2$ and $1.4{\pm}0.2$, respectively) (p<0.05). The rate of nuclear maturation of the highest and higher quality oocytes (grade A and grade B, respectively) was not affected by the oocytes collection methods. The oocytes collection methods also did not influence subsequent embryonic developmental competence after in vitro fertilization with M II stage oocytes. It is concluded that slicing and puncture methods of the ovaries can be used as an alternative techniques to aspiration by the syringe or vacuum pump.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.6
• /
• pp.441-450
• /
• 2001

A three stage impactor with the cutoff diameters of 1, 2.5, and 10$\mu\textrm{m}$ in aerodynamic diameter was developed and tested. The gravimetric method and the particle counting method were utilized to evaluate the collection performance of each stage. A vibrating orifice aerosol generator was employed to generate monodisperse test aerosols larger that 2$\mu\textrm{m}$ in diameter. Polystyrene latex (PSL) particles smaller than 2$\mu\textrm{m}$ in diameter were generated by an atomizer and the particle number concentration was measured by an Aerodynamic Particle Sizer Spectrometer. The experimental cutoff diameters obtained from the particle collection efficiency curves are in good agreement with the designed values. The square roots of Stokes number at 50% collection efficiency for stage 1, 2, and 3 are 0.42, 0.48, and 0.45, respectively. Effects of the particle bounce and the impaction plate on the collection efficiency were investigated. The collection efficiency curves including effect of the particle bounce were also compared with those of the MOUDI cascade impactor.