• 대한치과의사협회지
• /
• 제19권6호통권145호
• /
• pp.535-540
• /
• 1981

In order to collect the basic data for planning school dental health programmes, the author had examined dental health conditions of 120 males and 120 females of Changgyung Primary School children in the first grade. The percentages of persons with conditions requiring immediate attention, toothbrushing times and daily frequency, df rate, df index, dt index, ft index, it index, DMF rate, DT index, MT index, FT index, IT index, DMFT index, percentages of persons with periodontal status in every of the four categories with soft deposits, calculus, intense gingivitis, and advanced periodontal involvement were calculated and evaluated. The obtained results were as follows: 1. Persons with requiring immediate attention was 7.1% of all the examined children. 2. The df rate was 88.3%, and df index was 3.4 teeth per person. And then the DMF rate was 17.1%, while DMFT index was 0.3 teeth per person. 3. As the periodontal status, the persons with soft deposits was 90.0% of children, calculus 26.3%, intense gingivitis 0.4%, and no advanced periodontal involvement. 4. Average toothbrushing frquency was 1.2 times in a day per person. But 71.5% of toothbrushing was performed before meals, while the others after meals.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.

• Journal of Biosystems Engineering
• /
• 제10권1호
• /
• pp.54-68
• /
• 1985

It is desirable to collect the solar thermal energy at relatively high temperature in order to minimize the size of thermal storage system and to enlarge the scope of solar thermal energy utilization. So far the concentrating solar collector has been developed to collect solar thermal energy at relatively high temperature, but it has some difficulties in maintaining the volumetric body of solar collector for long term utilization. On the other hand, the flat-plate solar collector has been developed to collect the solar thermal energy at low temperature, and it has advantages in maintaining the system for long term utilization, since it's thickness is thin and not volumetric. In this study, to develop a solar collector that has both advantages of collecting solar thermal energy at high temperature and fixing conveniently the collector system for long term period, a cylindrical parabolic concentrating solar collector was designed, which has two rows of parabolic reflectors and thin thickness such as the flat-plate solar collector, maintaining the optical form of concentrating solar collector. The characteristics of the concentrating parabolic solar collector newly designed was analysed and the results are summarized as follows; 1. The temperature of the air enclosed in solar collector was all the same as $50^{\circ}C$ in both cases of the open and closed loop, and when the heat transfer fluid was not circulated in tubular absorber, the maximum surface temperature of the absorber was $118-120^{\circ}C$, this results suggested that the heat transfer fluid could be heated up to $118^{\circ}C$. 2. In case of longitudinal installation of the solar collector, the temperature difference of heat transfer fluid between inlet and outlet was $4^{\circ}-6^{\circ}C$ at the flow rate of $110-130{\ell}/hr$, and the collected solar energy per unit area of collector was $300-465W/m^2$. 3. The collected solar energy per unit area for 7 hours was 1960 Kcal/$m^2$ for the open loop and 220 Kcal/$m^2$ for the closed loop. Therefore it is necessary to combine the open and closed loop of solar collectors to improve the thermal efficiency of solar collector. 4. The thermal efficiency of the solar collector (C.P.C.S.C.) was proportional to the density of solar radiation, indicating the maximum thermal efficiency ${\eta}_{max}=58%$ with longitudinal installation and ${\eta}_{max}=45%$ with lateral installation. 5. The thermal efficiency of the solar collector (C.P.C.S.C.) was increased in accordance with the increase of flow rate of heat transfer fluid, presenting the flow rate of $110{\ell}/hr$ was the value of turning point of the increasing rate of the collector efficiency, therefore the flow rate of $110{\ell}/hr$ was considered as optimum value for the test of the solar collector (C.P.C.S.C.) performance when the heat transfer fluid is a liquid. 6. In both cases of longitudinal and lateral installation of the solar collector (C.P.C.S.C.), the thermal efficiency was decreased linearly with an increase in the value of the term ($T_m-T_a$)/Ic and the increasing rate of the thermal efficiency was not effected by the installation method of solar collector.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.656-661
• /
• 2015

본 연구의 목적은 스마트폰이나 태블릿 PC와 같이 문자 입력이 수월하지 않은 모바일 기기에서 사용자로 하여금 최소한의 키입력을 통해 최대한 빠르고 정확히 원하는 단어를 얻을 수 있도록 도와주는 단어 자동완성 시스템의 성능을 평가하는 것이다. 우리는 트위터에서 대량의 데이터를 수집하였으며, 수집된 데이터의 사용빈도에 따라 유니그램(unigram) 사전과 바이그램(bigram) 사전을 각각 구축하였다. 구축된 사전을 사용한 단어 자동완성 시스템의 성능을 평가하였으며 기존의 평가방법보다 단어 자동완성 기능의 특성을 잘 반영한 키입력 수익률과 복원율을 새로운 평가 방법으로 제안하였다.

• 한국인공지능학회지
• /
• 제4권1호
• /
• pp.11-13
• /
• 2016

These days, medical technology has been developed rapidly to meet desire of living healthy life. Average lifespan was extended to let people see a doctor because of many reasons. This study has shown rate of leaving of hospitals to investigate the rate of not only department of surgery but also department of internal medicine. Linear model, tree, classification rule, association and algorithm of data mining were used. This study investigated by using J48 and AD tree of decision-making tree In this study, J48 and AD tree of decision-making tree of data mining were used to investigate based on result of both data. Both algorithms were found to have similar performance. Both algorithms were not equivalent to require detailed experiment. Collect more experimental data in the future to apply from various points of view. Development of medical technology gives dream, hope and pleasure. The ones who suffer from incurable diseases need developed medical technology. Environment being similar to the reality shall be made to experiment exactly to investigate data carefully and to let the ones of various ages visit hospital and to increase survival rate.

• 성인간호학회지
• /
• 제26권6호
• /
• pp.621-629
• /
• 2014

Purpose: The purpose of this study was to investigate the nutritional support, gastric residual volume, and nutritional status of the intensive care unit (ICU) patients on enteral feeding. Methods: A descriptive longitudinal design was used to collect 5 day data on enteral nutrition of 52 ICU patients in an university hospital. Nutritional support was calculated with actual caloric intake compared to individual caloric requirement. Residual volumes were measured prior to routine feedings, and the serum albumin levels and the total lymphocyte counts were checked to evaluate nutritional status. The data were analyzed using one group repeated measures ANOVA, paired t-test, and Spearman's bivariate correlation analysis. Results: The subjects received their first enteral feeding on the $5.75^{th}$ day of ICU admission. The mean nutritional support rate was 49.1% of the requirement, however prescription rate and support rate were increased as time goes by. Gastric residual volumes were less than 10 cc in 95% cases. A significant negative correlation was found between nutritional support and nutritional status. Conclusion: The nutritional support for ICU patient was low compared to the requirement, and their nutritional status was worse than at the time of ICU admission. Further studies are necessary to develop nursing interventions for improving nutritional support for ICU patients.

• 천문학회지
• /
• 제46권6호
• /
• pp.235-242
• /
• 2013

We compare mass-loss rates of OH/IR stars obtained from radio observations with those derived from the dust radiative transfer models and IR observations. We collect radio observational data of OH maser and CO line emission sources for a sample of 1533 OH/IR stars listed in Suh & Kwon (2011). For 1259 OH maser, 76 CO(J=1-0), and 55 CO(J=2-1) emission sources, we compile data of the expansion velocity and mass-loss rate. We use a dust radiative transfer model for the dust shell to calculate the mass-loss rate as well as the IR color indices. The observed mass-loss rates are in the range predicted by the theoretical dust shell models corresponding to $\dot{M}=10^{-8}M_{\odot}/yr-10^{-4}M_{\odot}/yr$. We find that the dust model using a simple mixture of amorphous silicate and amorphous $Al_2O_3$ (20% by mass) grains can explain the observations fairly well. The results indicate that the dust radiative transfer models for IR observations generally agree with the radio observations. For high mass-loss rate OH/IR stars, the mass-loss rates obtained from radio observations are underestimated compared to the mass-loss rates derived from the dust shell models. This could be because photon momentum transfer to the gas shell is not possible for the physical condition of high mass-loss rates. Alternative explanations could be the effects of different dust-to-gas ratios and/or a superwind.

• 말소리와 음성과학
• /
• 제9권4호
• /
• pp.43-50
• /
• 2017

These days voice models of speech recognition software are sophisticated enough to process the natural speech of people without any previous training. However, not much research has reported on the use of speech recognition tools in the field of pronunciation education. This paper examined Google speech recognition of a short English paragraph produced by Korean college students in clear and casual speech styles in order to diagnose and resolve students' pronunciation problems. Thirty three Korean college students participated in the recording of the English paragraph. The Google soundwriter was employed to collect data on the word recognition rates of the paragraph. Results showed that the total word recognition rate was 73% with a standard deviation of 11.5%. The word recognition rate of clear speech was around 77.3% while that of casual speech amounted to 68.7%. The reasons for the low recognition rate of casual speech were attributed to both individual pronunciation errors and the software itself as shown in its fricative recognition. Various distributions of unrecognized words were observed depending on each participant and proficiency groups. From the results, the author concludes that the speech recognition software is useful to diagnose each individual or group's pronunciation problems. Further studies on progressive improvements of learners' erroneous pronunciations would be desirable.

• 한국태양에너지학회 논문집
• /
• 제26권1호
• /
• pp.7-12
• /
• 2006

The dish type solar thermal concentrating system can collect the solar energy above $800^{\circ}C$. It has a concentration ratio of 800 and total reflector area of $49m^2$. To operate solar receivers at high temperature, the optimum aperture size is obtained from a comparison between maximizing absorbed energy and minimizing thermal losses. The system efficiency is defined as the absorbed energy by working fluid in receiver divided by the energy coming from the concentrator. We find that system efficiency is stable in case of flow rate of above 6lpm. The system efficiency are 64.9% and 65.7% in flow rate of 6lpm and 8lpm, respectively. The thermal performance showed that the maximum efficiency and the factor of thermal loss in flow rate of 8lpm are 68% and 0.0508.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.