• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.3
• /
• pp.257-263
• /
• 1992

Immature embryos were tested for investigating the effect of cold treatment duration and GA$_3$ concentration on the vernalization response in barley. Immature embryos were cultured on B$_{5}$ medium with GA$_3$ for 5 days, and were transplanted under 20/15$^{\circ}C$ temperature after cold treatment. Germination rate and shoot length were increased more in 20-day-old embryos than those in 13-day-old ones but germination day was decreased. Addition of 1 or 10 ppm of GA$_3$ to B5 medium was effective on the growth of immature embryos. The higher GA$_3$ concentration was, the shorter time from embryo culture to flag leaf emergence and heading was. The earlist flag leaf emergence and heading were showed on treatment of 1 or 10 ppm of GA$_3$, but GA$_3$ did not completely replace vernalization. The days to flag leaf emergence of immature embryo-cultured barley with cold treatment for two and three weeks was shortened by 3 and 18 days at 1 ppm GA$_3$, and 16 and 20 days at 10 ppm GA$_3$, respectively, when compared to 0 ppm GA$_3$ culture with cold treatment for three weeks. It was at 10 ppm GA$_3$ with 3 weeks cold treatment that showed the lowest culm length, spike length and number of grain per spike. GA$_3$ concentration was not correlated significantly with each character in 1 week cold treatment, but was significant with each character in 2 weeks. In 3 weeks cold treatment, it was except for days to heading. Correlation between cold treatment duration and culm length was negative in 0 ppm GA$_3$. In 1 or 10 ppm of GA$_3$, all characters had highly negative correlation with cold treatment duration.n.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.466-472
• /
• 2013

This study was performed to determine the effects of the pretreatment and cold-vacuum drying methods on the physicochemical properties and antioxidant activities of dried peaches. Moisture content was significantly lower with 0.3% NaCl treatment with cold-vacuum drying. The pH, brix and acid ratio (SS/TA) were the lowest with 1.0% soluble Ca treatment, while soluble solid and SS/TA were significantly higher with 0.1% vitamin C treatment compared to those with other treatments. The ${\delta}E$ and browning degree was lower in the pretreated sample compared to the untreated sample. Cutting strength of dried peaches was highest in the pretreated samples, and it was the highest with 1.0% soluble Ca treatment. Total sugar content with 0.1% vitamin C and 1.0% soluble Ca treatment was significantly higher than that with 0.3% NaCl treatment. The free sugar content was lower with 0.3% NaCl treatment but it was higher with 0.1% vitamin C and 1.0% soluble Ca treatment. The sensory evaluation result was highest with 0.1% vitamin C treatment. Phenolic compounds and antioxidant ability were the highest with the 0.1% vitamin C and 0.1% soluble Ca treatment; all the dried peaches showed relatively high antioxidant activities. These results suggest that pretreatment can affect the quality of dried peaches, showing that cold-vacuum drying can be applied for the production of high quality dried peach products.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2014

For connector material applications, the influence alloying elements of Mn, Cr, Fe, and Ti and cold rolling reduction on the mechanical property, electrical conductivity and bendiability of Cu-Ni-Si-P alloy was investigated. The hot rolled plates were solution treated at $980^{\circ}C$ for 1.5 h, quenched into water, cold rolled by 10% and 30% reduction in thickness, and then aged at $440{\sim}500^{\circ}C$ for 3, 4, 5 times. respectively. Cu-Ni-Si-P-x alloys cold rolled by 10 reduction before heat treatment have a good bendability compare to cold rolled by 30 reduction. Cu-3.4Ni-0.8Si-0.03P-0.1Ti shows the peak strength value of 759 MPa, an electrical conductivity of 39%IACS, an elongation of 10% and a hardness of 256 Hv aged at $440^{\circ}C$ for 6 hrs. Thus it is suitable for lead frame and connector.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.877-885
• /
• 1995

Cold forging die for metal scissor is made by electric discharge machine. The impression of female die is made by electric discharge machine, the heat treatment is applied, and the impression is polished. When we forge goods by using this kind of die, the abrasion is severe and the crack occurs after forging about 240 strokes. Because the die should be frequently produced in the case, the cost rises, the work is delayed, and the precesion of goods is not good. Therefore, the electric discharge machine was not used in this study. Main die was produced by making hob, installing the hob to cold hobbing press, indenting the die material, and cold hobbing the impression. The die life was increased to 5,000-6,000 strokes in this case. In the future study, the die life will be increased to 10,000 strokes by changing the following : (1) the pre-treatment of slug, (2) the structure of die block, (3) the heat treatment of die material

• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.46-51
• /
• 2008

The effect of the addition of Co and N and subzero treatment on tensile strength and damping capacity was investigated in Fe-Cr-Mn alloy. Austenite was transformed into martensite by cold rollins increasing the degree of cold rollins led to an increase in the volume fraction of martensite. The damping capacity linearly increased with increasing volume fraction of ${\varepsilon}$ martensite in cold rolled specimens and subzero treated specimens after cold rolling. The volume fraction of ${\varepsilon}$ martensite, tensile strength and damping capacity was also increased by the addition of Co, while this treatment decreased the elongation. However, the volume fraction of ${\varepsilon}$ martensite, elongation and damping capacity were reduced by the addition of N, although the tensile strength increased. Tensile strength and damping capacity werealso increased by subzero treatment, while elongation decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.63-68
• /
• 2010

The use of aluminum alloy parts in the automotive industry has been increasing recently due to its low weight compared with steel to improve fuel efficiency. Companies in the auto parts' manufacturing sector are expected to meet the government's strict environmental regulations. In this study, manufacturing process of aluminum alloy bolt has been designed from forming to heat treatment. Bolt forming process is composed of cold forging for body and rolling for thread. In this study only cold forging process is considered by employing the finite element method. In the cold forging process, preform shape was designed and damage value was considered for die design. Two steps of forging process has been developed by the simulation and a prototype was manugactured accordingly. As a final process, solution heat treatment and aging process was employed. A final prototype was found to meet the required specifications of tensile strength and dimension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1308-1312
• /
• 2011

CCFL(Cold Cathode Fluorescent Lamp)for BLU of LCD and special lighting has been widely utilized. The removal of oxide film formed on electrode of CCFL in manufacturing process is required. In this pape Plasma treatment was carried out to remove the oxide film. To ensure the optimum process, the analysis of sheet resistance, XRD, AFM and solder test was conducted. A minimum sheet resistance and the maximum percentage of the solder coverage ratio were measured in optimal process conditions such as plasma power consumption 600W and processing time of 70 seconds. As the plasma treatment is confirmed to be due to removal of copper oxide, this process is expected to be used as a treatment of electrode for CCFL.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.2
• /
• pp.101-105
• /
• 2004

After extrusion, cold rolling and T-6 treatment, texture development of 7x1x Al-alloy with 0.1% Sc is studied. During extrusion the very strong <111>+weak <100> fiber texture is developed, which is Influenced on the formation of rolling texture. The texture after 80% cold rolling can be described by strong{112}<111>(Cu)+{123}<634>(S) component in the cross section of the extruded rod, the strong -fiber+weak{110}<001>(Goss) components in the longitudinal section, and the strong {110}<112>(Bs)+weak{001}<100>(Cube) components in the transverse section. The components of rolling texture are remained after T-6 treatment, but the maximum density of ODF is higher. The calculated mean r-values and the planar anisotropy are relatively high, which are dependent on the texture. After T-6 treatment, recrystallized equiaxed grains with average grain size of $1{\sim}2{\mu}m$ are obtained.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.2
• /
• pp.23-33
• /
• 2007

Summary of background data: At the wound from life of the human being very regarding at and a healing process the wound in the portion which is important meantime the many research is accomplished and healing process at the wound the research is small very from the physical therapy territory. Purpose: This study was performed to examine the effects of cold therapy and pulsed ultrasound treatment in the process of acute wound healing. To this end, we measured changes in the length of the wounds, and observed tissues through an optical microscope in order to evaluate the healing process of the acute wounds. Methods: We divided twenty Sprague-Dawley rats into four experimental groups of five rats each and treated them for three days after wound creation. Then we extracted tissues from the wounds on day 6th after wound creation and then took them out for hematoxylin-eosin(HE) staining. We measured changes in the length of the wounds every other day. Result: We were able to detect significant statistical differences in the cold therapy and pulsed ultrasound-treated wounds compared with control wounds. We observed tissues through an optical microscope and found the tissues in cold therapy and pulsed ultrasound-treated wounds healed well. Conclusions: Overall results indicated that the use of cold therapy and pulsed ultrasound treatment were effective in the process of acute wound healing.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.18 no.3
• /
• pp.149-174
• /
• 2014

Objectives to study definition and treatment of dizziness in the books of Cold damage which are classified as symptoms of all time. Methods 1. Quote provisions related to dizziness in "Sanghanlon(傷寒論)" 2. Among the books of Cold damage which are classified as symptoms, select 19 literatures on dizziness with table of contents and collect data and categorize in two perspectives on theories and disease pattern. 3. Compare and draw a chart all data collected in above methods. Results & Conclusions 1. In the books on Cold damage, dizziness is expressed in 2 ways such as head dizziness(頭眩) and fainting(鬱冒). fainting is much more several symptoms than head dizziness and it is the difference that it has mental confusion. 2. The cause of head dizziness after promoting sweating, vomiting and purgation is that source qi(元氣) of upper energizer(上焦) is deficiency, and cause of head dizziness before using method of treatment is wind(風), heat(熱), phlegm(痰), blood deficiency(血虛) and etc. 3. Main cause of fainting is that deficiency is getting severe so that cold invades, and symptoms are blood deficiency, after giving birth and excess pattern of fire and heat. 4. Remedies for head dizziness are using Yeonggyechulgam-tang(苓桂朮甘湯), jinmu-tang(眞武湯), sosiho-tang(小柴胡湯), sagunja-tang(四君子湯), samul-tang(四物湯) and etc. 5. Insamsambaek-tang (人蔘三白湯) and Sayeok-tang(四逆湯) are used for deficiency pattern of fainting, and Dojeok-san(導赤散), Daeseunggi-tang(大承氣湯), and Hwangryeonhaedok-tang(黃連解毒湯) are used for excess pattern(實證).