• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1633-1641
• /
• 2020

Objective: The objective of this study was to develop a model for estimating the carcass weight of Hanwoo cattle as a function of body measurements using three different modeling approaches: i) multiple regression analysis, ii) partial least square regression analysis, and iii) a neural network. Methods: Data from a total of 134 Hanwoo cattle were obtained from the National Institute of Animal Science in South Korea. Among the 372 variables in the raw data, 20 variables related to carcass weight and body measurements were extracted to use in multiple regression, partial least square regression, and an artificial neural network to estimate the cold carcass weight of Hanwoo cattle by any of seven body measurements significantly related to carcass weight or by all 19 body measurement variables. For developing and training the model, 100 data points were used, whereas the 34 remaining data points were used to test the model estimation. Results: The R² values from testing the developed models by multiple regression, partial least square regression, and an artificial neural network with seven significant variables were 0.91, 0.91, and 0.92, respectively, whereas all the methods exhibited similar R² values of approximately 0.93 with all 19 body measurement variables. In addition, relative errors were within 4%, suggesting that the developed model was reliable in estimating Hanwoo cattle carcass weight. The neural network exhibited the highest accuracy. Conclusion: The developed model was applicable for estimating Hanwoo cattle carcass weight using body measurements. Because the procedure and required variables could differ according to the type of model, it was necessary to select the best model suitable for the system with which to calculate the model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.857-863
• /
• 2012

In this study, tailor-welded blanks(TWB) were formed between high-strength steel(SABC1470) and cold rolled steels(SPFH590 and SPFC980) to improve passenger safety and reduce the weight of cars. Multi-material TWB specimens were highly strengthened through the heat treatment of SABC1470. The change in tensile strength caused by the stand-by time until water cooling after stamping and the deformation behavior of high-speed bending in a statically indeterminate condition such as in the center-pillar were evaluated. Multi-material TWB specimens that were heat-treated at the same temperature tended to show a decrease in tensile and yield strength, depending on the stand-by time until water cooling. On the other hand, Multi-material TWB specimens(SABC1470+SPFH590) that were heat treated at $850^{\circ}C$ showed good properties that were suitable for ensuring passenger safety in car accidents. From the viewpoint of passenger safety, it is best to use SABC1470 and SPFH590 in the upper and lower area of the center-pillar, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.35-48
• /
• 2013

Biodiesel is an alternative diesel fuel which can be obtained from the transesterification of vegetable oils, animal fats and waste cooking oil. The objective of this study is to evaluate the properties of biodiesel obtained from different feedstocks (soybean, waste cooking, rapeseed, cottonseed and palm oils). The biodiesel derived from different feedstocks was analyzed for FAME (fatty acid methyl esther) content, kinematic viscosity, flash point, CFPP (cold filter plugging point) and glycerin content. The quality of biodiesel was tested according to the Korean and European standard (EN14214, requirements and test method for biodiesel fuel). The biodiesels derived from soybean, waste cooking, rapeseed and cottonseed oils contain high amount of unsaturated fatty acid, while palm biodiesel is dominated by saturated fatty acid. The fuel properties of biodiesel, such as low temperature performance, kinematic viscosity and oxidation stability are correlated with the FAME composition components in biodiesel.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.475-487
• /
• 2013

The aim of this study is to examine an existence of mutual interdependency in terms of military expenditure and arms imports between Northeast Asian countries such as South Korea, North Korea, China, Japan, and U.S. Recently, the mood of post cold war and intensified globalization lead to be disarmament in pursuing a policy on national defence in many countries. Since potential menace to national security has been receiving more concern rather than a direct armed clash, mutual interdependency on military spending should be fully understood. For a methodological tools, ${\beta}$ and ${\sigma}$-convergences, convergence with rational expectation, and Granger causality test are employed. Empirical evidence shows that the convergences which are evaluated by ${\beta}$, ${\sigma}$, and by a model based on rational expectation are in general revealed, and differences are more sensitive to a military decision making procedures. Granger causality, however, is not being existed. To this end, it would be concluded that the Northeast Asian countries are going with a trend in the world than forming their own tendency in this region.

• Korean Journal of Cognitive Science
• /
• v.28 no.1
• /
• pp.27-42
• /
• 2017

Stroop effect(Stroop, 1935) is a reliable paradigm which has been used in various psychological research. Although classic Stroop experiment used color and color name for experimental stimuli, subsequent research reported that a color(e.g. green) and an object(e.g. grass) which displays a typical color show similar effects depending on color-object congruency(Klein, 1964). Because past research that used Stroop effect to investigate semantic representation tested association between concrete object and color, they predominantly used concrete nouns and their corresponding color names as stimuli(e.g. Dalrymple-Alford, 1968, 1972; Klein, 1964). Recently, Sherman and Clore(2009) reported that response time to white or black words is affected by moral value of words (e.g., honesty, crime) even when the words do not have specific referents. Based on this result, we tested association between thermesthesia-related adjectives(e.g., 따스한, 냉정한) and color(warm color, cold color) using Stroop task. The results showed that subjects were faster in their response to color when adjective-color was congruent than when incongruent, and there was an interaction between color and meaning of adjectives. The Stroop effect in this research is unique because, contrary to previous research that used concrete nouns, the effect was obtained even with abstract adjectives which do not have specific referents. In addition, unlike Sherman and Clore(2009) that used achromatic color, our results show that Stroop effect obtains between abstract adjectives and chromatic color.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.211-219
• /
• 2009

The purpose of the study described in this paper was to experimentally investigate branch squared T joints with cold formed hollow structural sections under the in plane moment in a Vierendeel Truss. The branch in the T joints was welded to the upper flange of the chord. The main experimental parameters were the ratio of the width to the thickness of the chord ($2{\gamma}$), with ${16.7{\leq}2{\gamma}{\leq}33.3}$, and the width ratio of the branch to the chord ($\beta$), with ${0.40{\leq}{\beta}{\leq}0.71}$. Nine specimens were tested and manufactured in joints under the in plane bending moment. Based on the results of the test, the in plane moment strength of the branch squared T joints was determined according to the bending deformation of the chord flange yielding, regardless of the ratio of the width to the thickness of the chord and the ratio of the width of the branch to the width of the chord. Also, the in plane moment strength of the branch squared T joints in the hollow structural sections can be defined as 1.5 times the moment load at M1%B the strength of the joints that governed the serviceability in the control group. Finally, the experimental results with the branch squared T joints show that the in lane moment strength of the joint increased as $2{\gamma}$ decreased and $\beta$ increased.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.645-661
• /
• 2009

The water extract of Dohongsamul-Tang(DHSMT) has been traditionally used to stroke and brain injuries in Oriental Medicine. The present study was designed to investigate the effects of DHSMT on the gene expression profile of cerebral infarction by cDNA microarray in photothrombotic ischemia mouse model. Photothrombotic ischemia was induced in stereotactically held male BALB/c mice using rose bengal and cold light. MRI was performed 24 hours after inducing photothrombosis using 1.5 T MRI and 47 mm surface coil to obtain T2-weighted, and contrast-enhanced images. After MRI test, animal was sacrificed and the brain sections were stained for hematoxylin and eosin and immunohistochemistry. MRI and histological analysis revealed that lesion of thrombotic ischemia was well induced in the cortex with the evidence of biological courses of infarction. The target area of thrombotic infarction was 1 mm anterior to bregma and 3 mm lateral to midline with 2 mm in diameter, which were decreased by administration of DHSMT. To assess gene expression pattern of cerebral infarction, mRNA was isolated and reacted with microarray chip(Agilant's DNA Microarray 44K). Scatter and MA plot analysis were performed to clustering of each functional genes. M value [M=log2(R/G), A={log2(R ${\times}$ G)}/2] was between -0.5 and +0.5 with 40% difference. After pretreatment with DHSMT, the expression levels of mRNA of many genes involved in various signaling pathway such as apoptosis, cell cycle, cell proliferation, response to oxidative stress, immune response, angiogenesis, and inflammatory cytokine were markedly inhibited in photothrombotic ischemia lesion compared to the control group. These results suggest that DHSMT prevent ischemic death of brain on photothrombotic ischemia model of mice through modulation of gene expression at the transcriptional level.

• Korean Journal of Pharmacognosy
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1978

The result of the study about the cultivation, the constituents, the sweetenity, and the development of preparations of Stevia and Hydrangea are as follows: 1. Hydrangea thrived at $200{\sim}1,400m$ above the sea-level, and the good ones were brought up at $600{\sim}1,200m$. 2. The good ones which belonged to the genera of Hydrangea were produced in the damp, dark and cold place. 3. The growth and cultivated yield of Stevia was not significantly influenced by the acidity of the soil. 4. The best season was May and June for propagation of Stevia by cutting method. 5. The growth rate of Stevia and Hydrangea was really good in the sandy fertile soil, but in the mucotic soil it was not suitable. 6. The extraction and separation of phyllodulcin by solvent had many difficulties, because it was very soluble in water, ethanol, ether, petroleum ether, acetone and benzene, etc. 7. The solubility of stevioside on the solvent was as follows: It was very soluble in water and methanol, slightly soluble in ethanol and acetone, and insoluble in ether, petroleum ether and chloroform. 8. The alkaloid reaction by Mayer reagent in Hydrangea extract was positive. 9. The ashification rate of Stevia was 8.66% to 8.72% and that of Hydrangea 17.02% to 17.04%. 10. The tannin of Stevia leaf was 7.80% to 7.88% and its of Hydrangea decreased 9.46% to 6.08% by fermentation. 11. The percent rates in minimum concentration-occurring sweetness in sugar, glycyrrhiza methanol extract, Hydrangea water extract, Stevia leaf water extract, decoction of Stevia's leaf, decoction of Stevia's stem were as follows: 1.2, 0.1, 0.1, 0.2, 0.4, 0.01, 0.1, 0.6. and sweetenity ratios of those were 1, 12, 12, 6, 3, 64, 12, 2, 12. It was very meaningful to develop preparations of stevia as stevioside, micronized powder, water extract, methanol extract and compound teas and in Hydrangea, water extract, methanol extract, single tea, and compound teas were less meaningful. 13. The genera of Hydrangea which is natural species in Korea was positive in phyllodulcin-identification test, but it was not available to make the sweet tea because of having a little content.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.575-583
• /
• 2009

As the height of buildings rises, new structural systems are being applied other than theexisting S, RC, and SRC to decrease the weight of buildings and to make their construction more efficient, CFT structureshad been applied in many building construction projects due to their superior structural performance and construction efficiency. CFT structures need a diaphragm to harmoniously transmit the beam flange load to the column and the opponent beam in connections. Especially, on the right and left sides of the column other beams are connected, The establishment of a diaphragm for the lower part flange load delivery of the beam and guarantee for concrete filing capacity difficulty have (What does this mean?). In this paper, connection details are proposed in the form of a welded vertical plate with a circular hole on the CFT column's interior to harmoniously transmit the lower-part beam flange load to the column and the opponent beam. Thesediaphragm details use the concrete anchor effect in the beam flange load delivery, with the concrete-filled CFT column interior piercing the hole of the perforated plate, and a perforated board is established vertically to improve the concrete filling capacity. To analyze the structural performance of the proposed connection details, five simple tension specimens were made with the following parameters: with our without vertical and horizontal perforated plates, shear hole number, concrete filled or not, thickness of the perforated plate, etc. Then experimental tests were performed on these specimens.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.416-421
• /
• 1984

Six soybean cultivars were used to study their seed development and germinability after flowering, in 1977 and 1978. The earlier varieties showed the faster seed development, but indeterminate types resulted in slower development. The earliest germinability was found in 15 to 25 days after flowering when dried with the pod shell. The germination of the seeds dried without pod shell, however, was inhibited significantly in early seed filling stages. Regular germinability of the Hill cultivar in a cold test was 40-45 days after flowering, or 10 to 15 days earlier than the physiological maturity.