• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.90-100
• /
• 1975

The estimation of the pre-processing condition of oyster is of great importance for distributors and processors. This study was attempted to establish the basic data for evaluating the processing suitability of oyster, which is the most important shellfish for domestic use and export. The data were analysed by measuring the condition index, chemical composition and heavy metal content of oysters. In order to eliminate the manual work that has to be done on a tightly closed oyster shell and avoid shrinkage in the oyster meat which is attendant on the steaming process, chemical means to open oyster were examined. finding the method of pretreatment of polyphosphate for frozen oysters were attempted to improve the product quality. The prevention of undesirable color change of the canned oyster meat is another problem to solve. The important results are as follows : 1. The ratio of meat volume and meat weight to the holding capacity by shells may be useful as an index to measure the condition index of oysters. 2. As a whole, monthly changes of moisture and fat content in oysters were reversely correlated. Protein content slightly decreased from April and rapidly decreased in July, and again rapidly increased in August but from September to November decreased slightly. In April, the content of glycogen was 4 percent. From this period to September, glycogen was rapidly decreased. From July to September, it was only 0. 7 to 1 percent but increased from October. There were little seasonal changes in pH value. The pH value of oyster meat was 6.0 to 6.2. The crude ash content was slightly decreased from June to August. 3. The range of monthly change of heavy metal content are as follows: Total mercury was 0 to 0.019 ppm, cadmium was 0.026 to 0.053 ppm, copper was 0.111 to 0.594 ppm, and lead_was 0.061 to 0.581 ppm. 4. By the results of condition index, chemical composition and heavy metal content of oysters, the suitable harvest season as raw materials for processing was the end of December to the end of May of next year. 5. The pretreatment of 10 percent polyphosphate in 5 percent salt solution of oyster meat appeared effective to reduce thawing drip during cold storage. 6. The pretreatment of $Na_2EDTA$ and BHA did not show the color prevention effect to the canned oyster meat during storage. 7. Magnesium chloride affected to open the valves of oysters.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.443-449
• /
• 1997

We examined the effect of pretreatments on seed germination, seedling growth, optimal seedling density of Phellodendron amurense. The seeds were carefully purified after collection in late Oct. from natural population at Mt. Chiri. For the evaluation of pretreatment effects, seeds were sowed in an experimental nursery after being stored in open ground($2{\sim}8^{\circ}C$) with soaking in 20% $H_2O_2$, 50-fold pon-pon solution, cold moist stratification in refrigerator($2{\sim}4^{\circ}C$) and dry storage in roam temperature($4{\sim}18^{\circ}C$), respectively, For the effect of growth density of seedlings, seedlings germinated in nursery were precisely controlled with 53, 104, 220, 380 seedlings per $m^2$. Among pretreatments for the promotion of germination rate, pon-pon treatment(68.8%) was highest, the others were higher than that in dry storage(2.3%), and these seed pretreatment methods were significantly different at 1% level. The height growth of seedlings showed the most vigor from Jun.12 to Jul. 8, and from Jul.20 to Aug. 2, and it reached to 72.8% of height growth. In case of 1-0 seedling, although seedling density per $m^2$ was increased, seedling growth was decreased. The optimal seedling density was 104 seedlings per $m^2$. The standard seedlings for plantation were above height 55cm, root collar diameter 8.1mm, and root length 21cm. These results demonstrated that seed of P. amurense requires stratification for the germination promotion.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2004.10a
• /
• pp.67-72
• /
• 2004

Quality of fresh-cut tomato slices was compared during cold storage under various modified atmosphere packaging conditions. Chilling injury of slices in containers sealed with Film A was higher than with Film B; these films had oxygen transmission rates of 87.4 and 60.0 ml $h^{-1}\;m^{-2}\;atm^{-1}$ at $5^{\circ}C\;and\;99\%$ RH, respectively. While slices in containers with an initial atmospheric composition of air, $4\%\;CO_2+1\;or\;20\%\;O_2,\;8\%\;CO_2+1\;or\;20\%\;O_2,\;or\;12\%\;CO_2+20\%\;O_2$ showed fungal growth, slices in containers with $12\%\;CO_2+1\%\;O_2$ did not. Low ethylene in containers enhanced chilling injury. Modified atmosphere packaging provided good quality tomato slices with a shelf-life of 2 weeks or more at $5^{\circ}C$. Experiments were conducted to compare changes in quality of slices of red tomato (Lycopersicon esculentum Mill. 'Sunbeam') fruit from plants grown using black polyethylene or hairy vetch mulches under various foliar disease management systems including: no fungicide applications (NF), a disease forecasting model (Tom-Cast), and weekly fungicide applications (WF), during storage at $5^{\circ}C$ under a modified atmosphere. Slices were analyzed for firmness, soluble solids content (SSC), titratable acidity (TA), pH, electrolyte leakage, fungi, yeasts, and chilling injury. With both NF and Tom-Cast fungicide treatments, slices from tomato fruit grown with hairy vetch (Vicia villosa Roth) mulch were firmer than those from tomato fruit grown with black polyethylene mulch after 12 days storage. Ethylene production of slices from fruit grown using hairy vetch mulch under Tom-Cast was about 1.5- and 5-fold higher than that of slices from WF and NF fungicide treatments after 12 days, respectively. The percentage of water-soaked areas (chilling injury) for slices from tomato fruit grown using black polyethylene mulch under NF was over 7-fold that of slices from tomato fruit grown using hairy vetch under Tom-Cast. When stored at $20^{\circ}C$, slices from light-red tomato fruit grown with black polyethylene or hairy vetch mulches both showed a rapid increase in electrolyte leakage beginning 6 hours after slicing. However, slices from tomato fruit grown using the hairy vetch mulch tended to have lower electrolyte leakage than those grown with black polyethylene mulch. These results suggest that tomato fruit from plants grown using hairy vetch mulch may be more suitable for fresh-cut slices than those grown using black polyethylene mulch. Also, use of the disease forecasting model Tom-Cast, which can result in lower fungicide application than is currently used commercially, resulted in high quality fruit for fresh-cut processing. Experiments were conducted to determine if ethylene influences chilling injury, as measured by percentage of slices exhibiting water-soaked areas in fresh-cut tomato slices of 'Mountain Pride' and 'Sunbeam' tomato (Lycopersicon esculentum Mill.). Ethylene concentration in containers without ventilation significantly increased during storage at $5^{\circ}C$, whereas little or no accumulation of ethylene occurred in containers with one or six perforations. Chilling injury was greatest for slices in containers with six perforations, compared to slices in containers with one perforation, and was over 13-fold greater than that of slices in control containers with no perforations. An experiment was also performed to investigate the effectiveness of including an ethylene absorbent pad in containers on subsequent ethylene accumulation and chilling injury. While ethylene in the no-pad controls increased continually during storage of both 'Mountain Pride' and 'Sunbeam' tomatoes at $5^{\circ}C$ under modified atmosphere conditions, no increase in accumulation of ethylene was observed in containers containing ethylene absorbent pads throughout storage. The ethylene absorbent pad treatment resulted in a significantly higher percentage of chilling injury compared with the no-pad control. In studies aimed at inhibiting ethylene production using AVG during storage of slices, the concentration of ethylene in control containers (no AVG) remained at elevated levels throughout storage, compared to containers with slices treated with AVG. Chilling injury in slices treated with AVG was 5-fold greater than that of controls. Further, we tested the effect of ethylene pretreatment of slices on subsequent slice shelf-life and quality. In slices treated with ethylene (0, 0.1, 1, or $10\;{mu}L\;L^{-1}$) immediately after slicing, ethylene production in non-treated controls was greater than that of all other ethylene pre-treatments. However, pretreatment of slices 3 days after slicing resulted in a different pattern of ethylene production during storage. Ihe rate of ethylene production by slices treated with 1 L $L^{-1}$ ethylene 3 days after slicing was greater during storage than any of the other ethylene treatments. With slices pre-treated with ethylene, both immediately and 3 days after slicing, the rate of ethylene production tended to show an negative correlation with chilling injury. Chemical name used: 1-aminoethoxyvinylglycine (AVG).

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.7-15
• /
• 1981

A Japanese larch has been reforested very much in Korea, but it is not used as a wood resources for paper pulp by now. So this study is carried out to utilize the larchwood for paper pulp manufacture through the Asplund pulping process. The experiment on increasing in the brightness of the pulp is made through the addition of $MgSO_4$, $ZnSO_4$, $Al_2(SO_4)_3$, and KI as a cellulose stabilizer in chip treatment with caustic soda which is followed by high-temperature defibration and conventional peroxide bleaching (5% NaOH plus 2% additive salt per wood in cold pretreatment), or in high-consistency (30%) pulp bleaching of hydrogen peroxide and peracetic acid (100% acitve oxygen per lignin) for conventional one. The results obtained are as follows: 1. The solution of 0.5% additive salts had different pH by the sort of bases that was pH 5.7 in $MgSO_4$, liquor, pH 4.9 for $ZnSO_4$, and pH 2.9 for $Al_2(SO_4)_3$, and in the precepitation of bases which ranged to pH 6-13 for $MgSO_4$, pH 5-12 for $ZnSO_4$, and pH 3-10 for $Al_2(SO_4)_3$. 2. The cellulose stabilizer affective in high-consistency peroxide bleaching was KI, $MgSO_4$, and $ZnSO_4$, but has made a little improvement in de lignification and brightness of pulp in comparison with no addition. 3. The higher alkalinity in the chip treatment has made the higher strength and brightness of larchwood Aspiund pulp instead of downing the pulp yield. And the effective compound for cellulose stabilizer in caustic soda pretreatment of chip was $ZnSO_4$, $Al_2(SO_4)_3$ and KI in order for the conventional peroxide bleaching after Asplund pulping. 4. Therefore, the more effective additives for cellulose stabilization in high-temperature defibration of larchwood suppose to be $ZnSO_4$, $Al_2(SO_4)_3$, and KI, while KI and $MgSO_4$ for peroxide bleaching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2018

Renewable energy has been of interests in the area of modern alternative fuels. Biogas is produced in waste landfill sites through anaerobic digestion processes, including hydrolysis, acidogenesis, organic acid fermentation (acetogenesis), and methane fermentation (methanogenesis). High contents of fine dust and moisture limited its utilization for direct combustion, town gas and vehicle fuel. Thus, this study proposed a new design for a cooling device using a centrifugal cyclone for simultaneous removal of fine dust and moisture as a pretreatment in the purification processes. A heat exchanger and an ID fan, which are installed inside and outside of the cyclone, in order to cool the humid gas below the freezing point and form a foggy mist. Such an atmosphere enhanced to capture fine dust as recirculating the cold mist flow. The water removal rate was 80.8% at a relative humidity of 95%, and the particle removal efficiency was 98.3% for $2.5{\mu}m$. Simultaneous removal efficiency was 70.8% and 99.6% for particle and moisture respectively.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.227-234
• /
• 1993

This study was carried out to seek for a most effective hastening method of seed germination by Pon-Pon treatment and asexual multiplication method by cutting in Zanthozylum piperitum. The results obtained in this study were as follows : 1. Cold moist stratification under the ground accompanied with Pon-Pon treatment was shown 74.3% of seed germination, which was the most effective one among pretreatment methods with significance at 1% level. 2. Height growth was shown continuous growth pattern and the maximum growth was shown during the period 1 July to 31 July, which corresponds 40.3% of total annual growth. 3. Although no noticeable difference among the kind of plant growth regulator in the rooting rate, there was difference among concentrations with significance at 1% level. 4. In the case of number of primary roots and T/R rate of rooted cuttings, treatment of plant growth regulators was significantly superior to control. 5. T/R rate in rooted cuttings was a high negative correlation (r=-0.7164) with the number of primary roots.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.645-661
• /
• 2009

The water extract of Dohongsamul-Tang(DHSMT) has been traditionally used to stroke and brain injuries in Oriental Medicine. The present study was designed to investigate the effects of DHSMT on the gene expression profile of cerebral infarction by cDNA microarray in photothrombotic ischemia mouse model. Photothrombotic ischemia was induced in stereotactically held male BALB/c mice using rose bengal and cold light. MRI was performed 24 hours after inducing photothrombosis using 1.5 T MRI and 47 mm surface coil to obtain T2-weighted, and contrast-enhanced images. After MRI test, animal was sacrificed and the brain sections were stained for hematoxylin and eosin and immunohistochemistry. MRI and histological analysis revealed that lesion of thrombotic ischemia was well induced in the cortex with the evidence of biological courses of infarction. The target area of thrombotic infarction was 1 mm anterior to bregma and 3 mm lateral to midline with 2 mm in diameter, which were decreased by administration of DHSMT. To assess gene expression pattern of cerebral infarction, mRNA was isolated and reacted with microarray chip(Agilant's DNA Microarray 44K). Scatter and MA plot analysis were performed to clustering of each functional genes. M value [M=log2(R/G), A={log2(R ${\times}$ G)}/2] was between -0.5 and +0.5 with 40% difference. After pretreatment with DHSMT, the expression levels of mRNA of many genes involved in various signaling pathway such as apoptosis, cell cycle, cell proliferation, response to oxidative stress, immune response, angiogenesis, and inflammatory cytokine were markedly inhibited in photothrombotic ischemia lesion compared to the control group. These results suggest that DHSMT prevent ischemic death of brain on photothrombotic ischemia model of mice through modulation of gene expression at the transcriptional level.

• Journal of Acupuncture Research
• /
• v.23 no.5
• /
• pp.23-29
• /
• 2006

Objectives : The present study was conducted to evaluate the effects of automatically controlled rotating acupuncture (ACRA) on thermal allodynia in neuropathic pain rats, and to examine whether the endogenous opioid system mediates the effects of ACRA. Methods : For the neuropathic surgery, the right superior caudal trunk was resected at the level between S1 and S2 spinal nerves innervating the tail. Two weeks after the nerve injury, ACRA stimulation with 4 different stimulation conditions (i.e., angle and frequency of rotation: 90o+1Hz, 90o+1/4Hz, 360o+/1Hz, and 360o+1/4Hz) was delivered to the Zusanli (ST36) acupoint for 15 min. The behavioral signs of thermal allodynia were evaluated by the tail immersion test (i.e., immersing the tail in cold $(4^{\circ}C)$ or warm $(4^{\circ}C)$ water and measuring the latency to an abrupt tail movement) before and after the stimulation. In an additional set of experiments, we examined the effects of naloxone (opioid Results : ACRA stimulations under all of the conditions above significantly relieved thermal antagonist, 2mg/kg, i.p.) on the action of ACRA stimulation. allodynia. There is no difference in the anti-allodynic effects among the 4 stimulation conditions. In addition, the effect of ACRA on thermal allodynia was reversed by naloxone pretreatment. Conclusion : These results indicate that ACRA stimulations have relieving effects on thermal allodynia in neuropathic pain rats, irrespective of stimulation parameters, and that this is mediated by the endogenous opioid system.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.194-199
• /
• 2008

In this study, the effective method to esterify the free fatty acids in jatropha oil was examined. Compared to other plant oils, the acid value of jatropha oil was remarkably high, 11.5 mgKOH/g. So direct transesterification by a base catalyst was not suitable for the oil. After the free fatty acids were esterified with methanol, jatropha oil was transesterified. The activities of four solid acid catalysts were tested and Amberlyst-15 showed the best activity for the esterification. After constructing the experiment matrix based on RSM and analyzing the statistical data, the optimal esterification conditions were determined to be 6.79% of methanol and 17.14% of Amberlyst-15. After the pretreatment, jatropha biodiesel was produced by the transesterification using KOH in a pressurized batch reactor. Jatropha biodiesel produced could meet the major specifications of Korean biodiesel standards; 97.35% of FAME, 8.17 h of oxidation stability, 0.125% of total glycerol and $0^{\circ}C$ of CFPP.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.202-209
• /
• 1991

This study was carried out to examine seed germination, seedling growth, and biomass production of Eucommia ulmoides. The results were summarized as follows ; 1. Cold moist stratification at a refrigerator showed 60.3% of seed germination, which is the most effective among pretreatment methods. 2. In case of 1-0 seedlings, sixty seedlings per $1m^2$ was the most appropriate density, and the growth quality of seedlings differed significantly among densities. 3. Height growth showed continuous growth pattern and the maximum growth was shown during the period 21 June to 20 July, which corresponds 32.7% of total annual growth. 4. As tree age and DBH increased, the production of bark and leaf increased, however, its increment rate remarkably dropped down after ten years. 5. When tree age was ten years, the rate of bark volume showed the maximum value, 12.42%. 6. Dry weight of barks and leaves and bark volume were positively related to the growth of DBH and height. 7. As tree age increased, leaf area decreased, but the number of leaves increased.