• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1273-1274
• /
• 2006

Chemically pure, hydride/dehydride titanium powders were cold pre-compacted then extruded at $850^{\circ}C$ and $\sim450MPa$ under argon. The extrusions were 100% dense with a narrow band of surface porosity and equiaxed microstructure of similar magnitude to the starting material. The tensile properties of the bars were better than conventionally extruded CP titanium bar product. Outcomes from this study have assisted in the identification of a number of key characteristics important to the extrusion of titanium from pre-compacted CP titanium powders, allowing the elimination of canning and hot isostatic pressing (HIPping) of billets prior to extrusion as per conventional PM processes.

• Preventive Nutrition and Food Science
• /
• 제7권1호
• /
• pp.5-11
• /
• 2002

The comparison of the volatile flavor components from Korean and Japanese Satsuma mandarin (C. unshiu Marcov. forma Miyagawa-wase) peel oils, isolated by cold-pressing, was performed by gas chromatography, mass-spectrometry and gas chromatography-olfactometry (GC-O). Eighty-five volatile components were identified in each oil by GC and GC-MS. Forty-three components were detected in each oil by GC-O. The total amount of monoterpene hydrocarbons was 95.88% (Korean mandarin) and 95.29% (Japanese mandarin). Limonene, ${\gamma}$-terpinene, myrcene and $\alpha$-pinene were the main components of the cold-pressed oils from the both samples. The volatile composition of the Japanese mandarin was characterized by a higher content of sesquiterpene hydrocarbons, especially bicyclogermacrene, $\alpha$-humullene and valencene. The volatile composition of two samples can easily be distinguished by the percentages of aldehydes, ketones and esters, which were found at higher levels in the Japanese mandarin. The sweet and fruity flavor was stronger in the Korean mandarin oil while herbaceous flavor was stronger in Japanese sample. From GC-O data it is suggested that the sweet and fruity flavor of the Korean mandarin resulted from terpinolene and linalool, and the herbaceous note of the Japanese mandarin from $\alpha$-humullene, nepal, ι-carvone and perill aldehyde.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.64-71
• /
• 1999

본 연구는 통상적으로 충밀도 섬유판 제조에 사용되고있는 요소수지를 페놀수지로 대체함으로써 그 장단점을 찾아 보기 위해 실행되었다. 페놀수지을 이용해 제조한 중밀도 섬유판의 성능은 표준 요건을 충족시켰으며 높은 내구성을 보였다. 아울러 24 시간 냉수 침적후 두께팽창은 2 퍼센트 이하로 낮게 나타났다. 요소수지를 페놀수지로 대체했을 경우 단점들은 비교적 높은 수지함량 (8% 섬유전건종량기준)과 긴 열압시간 (7 분)으로 판명되었다. 이러한 결과들은 페놀수지을 사용한 중밀도 섬유판제조시 열압공정의 최적화가 되어야함을 시사하였다.

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.21-31
• /
• 1989

최근 국내에서도 각종 공작기계 가공의 발전으로 말미암아 이에 쓰여지고 있는 윤활제의 이용범위도 점진적으로 확대되어 가고 있음은 물론 특히 Water계 윤활제의 요구성능은 점점 가혹하게 되어지고 있다. Water계 윤활제라고 하면 일반적으로 Cutting, Grinding, Drawing, Pressing, Heat Treating 등의 공작기계 계통의 Oil을 연상할 수 있겠지만 이들 이외에 각종 유압작동유를 비롯하여 Rolling Oil도 포함되고 있다. 따라서 본 논고에서는 근간 Crose up 되어지고 있는 Water계 윤활제 중 냉각압연유에 대하여 간략하게 기술하여 보고자 한다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1146-1147
• /
• 2006

Diamond segments were fabricated by cold pressing and sintering under pressure at the temperature up to $750^{\circ}C$. Based on the results of this investigation, it can be concluded that the segments containing 39wt.% cobalt in the matrix material have the highest bending strength at a fracture probability of 50 % due to the weibull distribution method. According to the weibull statistics, it was also determined that the transverse rupture strength was the best for 39 wt.% cobalt ratio in the matrix material for the fracture probability when the other variables are the same.

• 한국세라믹학회지
• /
• 제40권10호
• /
• pp.931-935
• /
• 2003

A complex-shaped part was successfully fabricated by Laminate Object Manufacturing (LOM) technique using silicon nitride tape with aligned silicon nitride whisker seeds. The ceramic tape was cut using a commercial cutting plotter according to the cross section drafts generated by slicing a 3-D model, and then the tapes were stacked sequentially. In order to improve adhesion between the tapes, stacking was performed under vacuum. After binder burnout, the part was encapsulated using latex emulsion and was cold isostaically pressed under 250 ㎫. It was sintered to 98.5% TD at 2148 K for 4 h under 2 ㎫ nitrogen pressure.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.189-190
• /
• 2006

During cold compaction processes loose powder is pressed under tooling action in order to produce complex shaped engineering components. Here, the analysis of the plastic deformation of granular packings is of fundamental importance to the development of computer simulation models. Powders can be idealized by packing discrete particles, where each particle is a sphere meshed with finite elements. The pressing of a body centered cubic packing was compared with numerical prediction and experimental data. The global response was expressed in force-displacement curve, and the accuracy of the numerical models analyzed for high relative densities up to 0.95.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.356-364
• /
• 1998

$ZTA:\;Al_2O_3/\;15\;vol{%}\;ZrO_2$ (Zirconia Toughened Alumina : ZTA)를 상압소결에 의해 제조시 분무건조한 granule의 특성에 따른 성형밀도 및 소결밀도의 변화를 고찰하여, 소결밀도의 재현성을 향상시킬 수 있는 성령 공정 조건을 제시하였다. 결합제의 첨가 유무에 따라 granule의 구형도, 평균크기, granule 내의 hollow의 생성정도, 수분함유량 등이 다름을 확인하였다. granule의 물성 차이가 성형거동에 미치는 영향을 성형압(80~120MPa)과 성형방법(일축성형과 정수압 성형)에 따른 성형밀도의 변화를 통하여 조사하였다. granule의 특성 변화에 의한 밀도의 낮은 재현성은 성형압과 성형방법의 최적화를 통하여 극복될 수 있음을 확인하였다. 즉 가능한 낮은 압력(80MPa)에서 일축성형한 후 고압(500MPa)에서 정수압 성형하였을 때 소결후 밀도변화는 1%이내에서 조절되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.471.2-471.2
• /
• 2014

We demonstrate here that an improvement in precursor film density (green density) leads to a great enhancement in the photovoltaic performance of CuInSe2 (CISe) thin film solar cells fabricated with Cu-In nanoparticle precursor films via chemical solution deposition. A cold-isostatic pressing (CIP) technique was applied to uniformly compress the precursor film over the entire surface (measuring 3~4 cm2) and was found to increase its relative density (particle packing density) by ca. 20%, which resulted in an appreciable improvement in the microstructural features of the sintered CISe film in terms of lower porosity, reduced grain boundaries, and a more uniform surface morphology. The low-bandgap (Eg=1.0 eV) CISe PV devices with the CIP-treated film exhibited greatly enhanced open-circuit voltage (VOC, from 0.265 V to 0.413 V) and fill factor (FF, from 0.34 to 0.55), as compared to the control devices. As a consequence, an almost 3-fold increase in the average power conversion efficiency, 3.0 to 8.2% (with the highest value of 9.02%), was realized without an anti-reflection coating. A diode analysis revealed that the enhanced VOC and FF were essentially attributed to the reduced reverse saturation current density (j0) and diode ideality factor (n). This is associated with the suppressed recombination, likely due to the reduction in recombination sites such as grain/air surfaces (pores), inter-granular interfaces, and defective CISe/CdS junctions in the CIP-treated device. From the temperature dependences of VOC, it was confirmed that the CIP-treated devices suffer less from interface recombination.

• Journal of Applied Biological Chemistry
• /
• 제57권2호
• /
• pp.123-129
• /
• 2014

The antioxidant and antimicrobial activities of Camellia oleifera seed oil were studied. Four kinds of seed oil samples were prepared, crude oil and refined oil, extracted by cold pressing method (CPC, CPR), and organic solvent extraction (OSC, OSR). Antioxidant activity analysis was measured in 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)-diammonium salt, ferric reducing Ability of Plasma, and 2,2-diphenyl-1-picrylhydrazyl assays. Besides, the percentage of inhibition of red blood cells hemolysis induced by 2,2'-azobis(2-amidnopropane) dihydrochlorid, the lag time of LDL conjugated dienes formation in vitro, and the inhibitors of loss in tryptophan fluorescence were all used to estimate the antioxidant activity of the samples. The total phenolic contents (TPC) were detemined by Folin-Ciocalteu method. The TPC of the C. oleifera seed oils can be arranged in descending order: CPC ($1.9172{\mu}g/mL$) > OSC ($1.5218{\mu}g/mL$) > CPR ($1.0611{\mu}g/mL$) > OSR ($0.6782{\mu}g/mL$). And the oils were investigated for activity against Escherichia coli, Bacillus subtilis, Saccharomyces cerevisiae and Aspergillus niger. The results showed the antioxidant activity of crude oil by cold pressing method was stronger than others, and all oils did inhibit activity of the top three bacteria expert A. niger. The further significance of the study contributes to measure the antioxidant and antimicrobial activity of the potential health benefits by the different methods of preparation and the oil of C. oleifera seeds acting as free radical scavenger, pharmaceuticals and preservatives may offer some information in medicine and cosmetic not just in food field.