• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.280-284
• /
• 2017

'Hwaweon 6' was developed from a cross between 'Hwaseongbyeo' and a wild species, Oryza minuta L. (Acc. No. 101154) based on marker-assisted selection and backcrossing. The recurrent parent 'Hwaseongbyeo' is a high grain quality cultivar with medium maturity. Hwaweon 6 is nearly isogenic to Hwaseongbyeo except a small O. minuta introgressed segment on chromosome 7 harboring genes related with spikelets per panicle. The preliminary and replicated yield trial was conducted at Chungnam National University and Chungcheongnamdo Agricultural Research & Extension (CARES), Yesan in 2009 and 2010. The local adaptability test was carried out by the National Seed Management Office (NSMO) in 2011 and 2012. This cultivar was registered to NSMO with a cultivar designated as Hwaweon 6. This cultivar averaged 80cm in culm length and has a medium growth duration. Milled rice of Hwaweon 6 is translucent and the grain quality traits are comparable to those of the recurrent parent. The average yield potential of Hwaweon 6 in grain was about 6.57 MT/ha at the ordinary fertilizer level for two years about 3.0% higher than that of Hwaseongbyeo due to an introgression of the quantitative trait locus (QTL) for spikelets per panicle (qSPP7) from O. minuta. This variety is comparable to Hwaseongbyeo in low temperature germinability and cold tolerance. The qSPP7 QTL would be useful in enhancing yield potential in rice breeding program.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.398-403
• /
• 2011

A dielectric barrier discharge plasma (DBDP) treatment system was fabricated and the optimum operating conditions for the plasma generation were determined in order to explore the potential of cold plasma as a non-thermal proessing technology. The microbial inactivation performance of the system was also evaluated against Staphyloocus aureus. The system consisted of power supply, transformer, electrode assembly and sample treatment plate. The input power was 220 V single phase AC and amplified to 10.0-50.0 kV on a transformer. A pulsed sine wave of frequency 10.0-50.0 kHz was introduced to the electrode embedded in ceramic as a dielectric barrier material in order to generate plasma at atmospheric pressure. Higher currents and consequently greater power were required for the plasma generation as the frequencies increased. A homogeneous and stable plasma was generated at currents of 1.0-2.0, and frequencies of 32.0-35.3 kHz. The optimum electrode-gaps for the plasma generation were 1.85 mm without loaded samples. More power was consumed as the electrode-gaps increased. The practically optimum electrode- gap was, however, 2.65 mm when samples were treated on slide-glasses for microbial inactivation. The maximum temperature increase after 10 min treatment was less than 20$^{\circ}C$, indicating no microbial inactivation effect by heat and thereby insuring a non-thermal method. The DBDP inactivation effect against Staphyloocus aureus increased linearly with treatment time up to 5 min, but plateaued afterward. More than 5 log reduction was achieved by 10 min treatment at 1.25 A.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.76-89
• /
• 2018

The distribution of the combined heat and power system is active as a solution to the instability of energy supply and environmental pollution caused by continuous industrial development. In Korea, the safety standards for combined heat and power system using a gas engine are insufficient therefore the study on this is needed. In this study, the safety performance and structural/material assessment items of domestic and international standards applied to the combined heat and power system were analyzed to carry out a standardization study on safety performance applicable to 20 kW gas engine combined heat and power system. In addition, the safety performance assessment (plan) of the gas engine combined heat and power system was derived by performing risk analysis and risk assessment using HAZOP. Assessment items include engine ignition systems related to safety performance, piping tight performance, watering and temperature rise performance, combustion performance, electrical efficiency, thermal efficiency, overall efficiency and humidity performance. Gas and water pipes, gas control and shut-off valves, durability, heat resistance, and cold resistance of metal or non-metallic materials related to the structure and materials of the gas engine combined heat and power systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.103-108
• /
• 2019

Non-equilibrium molecular dynamics simulation on the thermal boundary resistance(TBR) of an aluminum(Al)/silicon(Si) interface was performed in the present study. The constant heat flux across the Si/Al interface was simulated by adding the kinetic energy in hot Si region and removing the same amount of the energy from the cold Al region. The TBR estimated from the sharp temperature drop at the interface was independent of heat flux and equal to $5.13{\pm}0.17K{\cdot}m^2/GW$ at 300K. The simulation result was experimentally confirmed by the time-domain thermoreflectance technique. A 90nm thick Al film was deposited on a Si(100) wafer using an e-beam evaporator and the TBR on the film/substrate interface was measured using the time-domain thermoreflectance technique based on a femtosecond laser system. A numerical solution of the transient heat conduction equation was obtained using the finite difference method to estimate the TBR value. Experimental results were compared to the prediction and discussions on the nanoscale thermal transport phenomena were made.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.29-35
• /
• 2017

Quality changes of dried sea cucumber (Stichopusjaponicus) after applying a cyclic rehydration and retorting process were investigated during 4 weeks of storage. The length, volume, and weight of dried sea cucumber increased significantly as the number of rehydration cycles increased. Sea cucumber (SC) was bottled in the glass jar and a retort thermal process ($121.1^{\circ}C$, 0.15 MPa) was applied. The total thermal processing time (TTT) was 24 min based on the temperature at the cold point. The size and texture of retorted SC were significantly changed until the first week of storage. However, regardless of the number of rehydration cycles, the size and texture of samples at different rehydration cycles showed no significant difference during the whole storage. The length, volume, weight, rehydration ratio ($R_R$), hardness, and chewiness at the maximum degree of swelling during rehydration of dried SC were estimated as 100.86 mm, 38.62 mL, 41.05 g, 6.39 of $R_R$, $249.19g_f$, and 4.05 mJ, respectively.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.185-195
• /
• 2022

To enable the widespread use of buckwheat and create novel consumer demands through improved food processing techniques, we compared the quality characteristics of roasted groats following different processing and brewing methods for common and tartary buckwheat. The various processing steps resulted in significant reductions in rutin content for both buckwheat species, while the quercetin content increased in the tartary buckwheat. The fully processed tea products showed dramatic differences in rutin content, which varied based on the buckwheat species, formulation, and brewing method. Tartary buckwheat contained an average of 61 times more rutin than common buckwheat. The tartary buckwheat variety, Hwanggeum-miso, was used to determine an optimal roasting temperature of 70-80℃. Finally, we suggest that consumers who want buckwheat tea rich in rutin would prefer hand-drip-extracted tea, while those who want tea with less bitterness, sweetness, and good flavor would prefer the cold-brewed method.

• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.264-271
• /
• 2022

In this study, the nutritional properties of sterilized and non-heat-pressed raw perilla oil (SRPO) were studied and its potential as a functional food was evaluated. The copper, cobalt, and calcium levels were high in sterilized and SRPO. The total polyphenol content and ABTS radical scavenging activity were the highest in SRPO, whereas nitrite scavenging activity was the highest in 45℃ cold pressed perilla oil (CPPO). The above results confirmed that sterilized and non-heat-pressed perilla oil had high mineral and total polyphenol contents, as well as ABTS radical scavenging activity and nitrite scavenging ability. The peroxide value of SRPO decreased as the storage period increased, and the acid value of low-temperature pressed perilla oil over 65℃ (LPPO) significantly increased. This work also provided an opportunity to develop a new method for manufacturing perilla oil, and it is hoped that these experiments will form a basis for the commercialization of perilla oil.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.816-832
• /
• 2022

To evaluate the effects of early postmortem vacuum packaging (VP) on meat quality during postmortem chilled storage, hot-boned lamb was vacuum-packaged at 1, 6, 12, 24, and 48 h postmortem and stored around 2℃ until 168 h postmortem, with lamb packaged in plastic wrap as the control (aerobic packaging). Intramuscular pH decline was delayed when lamb was vacuum packaged at 1, 6, and 12 h postmortem (p<0.05). The lamb vacuum-packaged at 1 h postmortem (VP-1h group) had significantly lower shear force values and purge losses accompanied by lower free thiol group values than other treatments during postmortem storage and was also higher in extractable calpain-1 activity by 6 h postmortem (p<0.05). Free thiol group concentrations were significantly higher after VP at 6 and 12 h postmortem (p<0.05). Packaging lamb under vacuum very early postmortem produced the lowest shear force and purge loss, likely by slowing heat loss and muscle temperature decline, implying that lamb quality is improved by VP when applied very early postmortem. This was at the expense of protein oxidation, which was unrelated to other meat quality measurements, most likely because potential contracture during hot boning confounded its impact. Further research is required to understand the implications of the interaction between protein oxidation, VP, and hot boning on the acceptability of lamb.

• Korean Journal of Plant Resources
• /
• v.36 no.2
• /
• pp.133-171
• /
• 2023

This study was conducted to prepare basic data by analyzing the biological values and environmental factors of algific talus slope in order to respond to climate change due to the greenhouse effect, and to establish plans for forest biodiversity preserving and managing. Meteorological information was measured and the flora of vascular plants were investigated for six algific talus slope by seasonally from 2020 to 2021. As a result of the investigation, the temperature of all 6 algific talus slope was lower than that of the area where the algific talus slope was located in summer, and flora was 101 families, 350 genera, 621 species, 18 subspecies, 57 variants, 7 varieties, 703 taxa. In sum, it is judged that the algific talus slope has sufficient reasons and value to be preserved because it has excellent micrometeorological value from the cold wind blowing in summer and phytogeographical value in which various plants live in a small area. However, in spite of such an important area, the management of algific talus slope is insufficient, and the algific talus slope is damaged or the ecosystem of the algific talus slope is disturbed. Therefore, it is necessary to establish a systematic conservation and management plan by designating algific talus slope as a forest genetic resource reserve and OECM.

• Composites Research
• /
• v.36 no.4
• /
• pp.246-252
• /
• 2023

A secondary barrier made of glass fiber reinforced composites has been installed infinitely using automatic bonding machine(ABM) in membrane type LNG cargo containment system (CCS). At the same time, significant thermal stress due to cryogenic heat shrinkage has occurred in the composite on the non-bonding area between the adhesive fixation at both ends. There have been studies from the perspective of structural safety evaluation taking this into account, but none that have analyzed mechanical property taking an prolonged length into account. In this study, 2-parameter Weibull distribution statistical analysis was used to standardize reliable mechanical property for actual length, taking into account the composite's brittle fracture of ceramic material with wide fracture strength dispersion. Related experimental data were obtained by performing uniaxial tensile tests at specific temperatures below cryogenic condition considering LNG environment. As a result, the mechanical strength increased about 1.5 times compared to -20℃ at -70℃ and initial non-linear behavior of fiber stretched was suppressed. As the temperature decreased until the cryogenic, the mechanical strength continued to increase due to cold brittleness. The suggested mechanical property in this study would be employed to secure reliable analysis support material property when assessing the safety of secondary barrier's structures.