• Journal of Preventive Medicine and Public Health
• /
• 제21권2호
• /
• pp.238-244
• /
• 1988

This study was conducted to investigate the causes of burn and emergency cares taken on the spot for the burn patient. Study population included 161 burn patients admitted to 2 university hospitals and 1 general hospital in Taegu from November 1, 1987 to April 30, 1988. Patients or guardians were interviewed with a structured questionnare. Out of 161 burn patients 111(68.9%)were males and 50(31.1%) females. Preschool children of 1-4 years old accounted for 29.8% of the total patients. Burns of children under 15 years of age took place at home in 91.0%, while 48.3% of burns of adult (15 years and over)males occurred at the working place, and 68.0% of adult females occurred at the home. Out of total burns occurred at home 39.8% took place at kitchen/dining room and 24.1% in the room. The most common cause of burns in children was the boiling water or hot food (74.3%). In adults the common causes were electrical burn(22.4%), hot water or food(19.0%) and explosion(12.1%) for males, and hot water or food(32.0%) and explosion (20.0%) for females. Common emergency cares for the burn taken on the spot were undressing(64.6%), pouring Soju(liquor)(13.7%), and pouring cold water(5.0%). There were a few cases who applied ash, soy or salt. To prevent burn, it is recommended to remodel the traditional kitchen and coal-briquet hole, to strengthen the safety control of LP Gas and LN Gas supply, to educate the public for the handling method for such gases, to strengthen the occupational safety control, to improve the safety device for the electric wire and socket, and to limit the temperature of hot water at home and public baths.

• 한국환경생태학회지
• /
• 제35권6호
• /
• pp.659-668
• /
• 2021

본 연구는 부산광역시를 대상으로 열환경을 개선하기 위한 바람길 관리 방안 제안을 목적으로 한다. 이를 위해, Landsat-7 위성 열영상 자료와 공간통계 분석을 실시하여 부산광역시의 Hot spot과 Cool spot 지역 특성을 파악하였으며, WRF 기상모의를 통해 주요 바람길을 분석하였다. 그 결과, Hot spot 지역 중 열환경 개선이 요구되는 지역은 부산진구, 동래구, 연제구와 사상구 공업지역, 대규모 시설지역에는 부산항 부두로 나타났으며 주요 바람길에는 금정산~백양산~구덕산 계곡부로서 확인되었다. 이를 바탕으로 바람길 관리 전략을 제시하면 다음과 같다. 공업시설과 부산항 일대는 대기 온도 상승 요인으로서 주변 지역의 열환경을 악화시키므로 시설의 온도저감 및 바람길을 고려한 도시·건축계획이 요구된다. 바람길 관리가 필요한 지역으로 만덕동, 사직동 일대 산림에 대한 추가적인 훼손이 일어나지 않도록 하여야 하며, 산림과 인접한 지역의 대규모 고층아파트는 산림에서 생성된 차고 신선한 공기의 흐름을 방해하므로 금정산과 접해있는 제3종 일반주거지역의 신규·재개발에 따른 고층아파트 단지 조성은 지양해야 한다. 본 연구 결과는 부산광역시의 기후변화에 대응한 도시계획 및 환경계획수립 시 기초자료로 활용할 수 있을 것으로 기대한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.48-53
• /
• 1997

Electronic Speckle Pattern Interferometry(ESPI) using the Model 95 Ar laserm, a video system and an image processor was applied to the in-plane displacement measurements. Unlike traditional strain gauges or moire method, ESPI method requires no special surface preparation or attachments and can be measured in-plane displacement with no contact and real time. In this experiment wpecimen was loaded in parallel with a loadcell. The specimen was the cold rolled sdteel sheet of 2mm thickness, which was attached strain gauges. The study provides an example of how ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI compare with the data which was measured by strain gauge method in tensile testing.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.8-15
• /
• 2007

The jet impingement cooling characteristics are investigated experimentally. The study is motivated by the potential application of local hot spot cooling by means of the vortex tube. The purposes of this research are to examine the effect of the nozzle-block spacing and flow rate. The results of jet through vortex tube is compared with ones of circular Jet. Flow visualization by the smoke-wire technique is also performed to investigate the flow structure. As the nozzle-block spacing is increased and flow rate decreased, the cooling effect of the Jet through the vortex tube decreases mere remarkably than that of the circular jet. So the cooling effect for the jet through the vortex tube is higher than that for the circular jet at $H/D{\leq}3$, $Q{\geq}10m^3/h$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.424-428
• /
• 2007

In the current most tool using heat and mass balance in a coal gasifier is dependent on commercial code such as STANJAN, CHEMKIN. However, in order to keep the self-reliance technology, it is necessary to develop the original design tool available for comprehension and analysis on the spot. So in this study, its own heat and mass balance program is developed on the assumption that the process in a coal gasifier is adiabatic and quasi-equilibrium. The mass balance is calculated by using the chemical equilibrium principle. Also the heat and mass balance according to main operating factors such as temperature, pressure and O2/Coal ratio, was carried in this tool. This heat and mass balance was verified on the basis of the results simulated in STANJAN, commercial codes using similar logic.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.52-57
• /
• 1997

Electronic Speckle Pattern Interferometry(ESPI) using the Model 95 Ar. laser, a video system and an image processor was applied to the in-plane displacement measurements. Unlike traditional strain gauges or Moire method, ESPI method requires no special surface preparation or attachments and can be measured in-plane displacement with no special surface preparation or attachments and can be measured in-plane displacement with no contact and real time. In this experiment specimen was loaded in parallel with a loadcell. The specimen was the cold rolled steel sheet of 2mm thickness, which was attached strain gauges. The study provides an example of how ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI compare with the data which was measured by strain gauge method in tensile testing.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.69-77
• /
• 1998

Development on the mechanical properties of steel sheet for the automobile body panel is very important in the BAF(Batch annealing furnace) annealing process. Because of the heat treatment method in the BAF, mechanical properties were decided on the heat treatment method of the coil. So, we tested on the development of mechanical properties according to heat treatment method at the annealing furnace using the In atmospheric gas($H_2$ : 75%, $N_2$ : 25%) and the HNx atmospheric gas($H_2$ : 5%, $N_2$ : 95%) We confirmed the following characteristics, mechanical properties were changed under the influence of the annealing cycle and the atmospheric gas. And, we have some result according to heat treatment method. Elongation of the mechanical properties in the HNx BAF is higher than the Ax BAF. But tensile strength and hardness is higher than the HNx BAF.

• 생명과학회지
• /
• 제20권10호
• /
• pp.1427-1432
• /
• 2010

본 연구는 WSSV의 재조합단백질 rVP466에 대하여 생산된 항혈청을 사용하여 WSSV에 대한 neutralization (중화) 효과를 확인하고자 수행하였다. 먼저 재조합단백질 rVP466의 생산을 위해 WSSV의 구성단백질 VP466을 암호화하는 유전자인 VP466을 포함하는 재조합 플라스미드 pCold-VP466을 제작한 다음 이것을 발현용 숙주인 E. coli RIPL에서 발현하였다. 발현된 rVP466에 대한 항혈청은 토끼를 사용하여 생산하였으며, 항원 rVP466에 대한 특이면역반응은 Western blot을 통해 확인하였다. WSSV에 대한 항혈청의 중화효과를 확인하기 위해 항혈청과 반응시킨 바이러스액($1{\times}10^4$ 배로 희석된 WSSV)을 이용하여 실험용 새우(Penaeus chinensis)에게 주사 감염을 통해 공격실험(challenge test)을 수행하였다. 실험 결과, WSSV로 공격실험한 감염대조구(positive control)의 새우들은 감염 후 17일째에 100% 누적폐사율을 보였으며, preimmune serum과 WSSV의 혼합액을 challenge한 preimmune control의 새우들은 감염 후 25일째에 83%의 누적폐사율을 보였다. WSSV와 rVP466 항혈청을 1:0.01, 1:0.1, 1:1로 혼합한 액으로 challenge한 새우들은 감염 후 25일째에 각각 73%, 53%, 46%의 누적폐사율을 보였다. 이상의 결과를 통해 WSSV가 rVP466 항혈청에 의해 농도의존적으로 neutralization됨을 확인하였으며, 이는 WSSV 감염과정에 VP466이 관여함을 나타내는 것이다.

• 한국지리정보학회지
• /
• 제23권3호
• /
• pp.161-173
• /
• 2020

이 연구는 부산소방재난본부의 119 구급활동일지를 이용하여 부산의 구급서비스의 지역적 불균형을 조사하였다. 2017년 구급신고 자료를 집계구 단위로 취합하여 구급서비스의 수요(신고건수, 인구대비 신고건)와 공급(신고건수, 인구대비 신고건수, 현장도착시간의 평균·변동계수·이상치, 관할구역 외 출동건수)의 공간분포를 GIS 공간통계분석 중 핫스팟분석을 이용하여 분석하였다. 분석결과는 구급서비스의 수요와 공급 모두 집중적으로 나타나는 핫스팟지역과 콜드스팟지역이 명확하게 구분되었으며, 이는 부산 내 구급서비스의 수요 뿐 아니라 공급이 지역적으로 불균형함을 의미한다. 특히 원도심과 그 주변지역과 부산시 외곽지역에서의 구급수요 및 공급에서 극명한 차이를 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.433-433
• /
• 2016

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission. CNT yarns have demonstrated its potential as excellent field emitters. It was demonstrated that a small focal spot size was achieved by manipulating some electrical parameters, such as applied bias voltage at the mesh gate, and electrostatic focal lenses, geometrical parameters, such as axial distances of the anode, and the electrostatic focal lens from the cathode assembly, and the dimension of the opening of the electrostatic lens. Electrical-optics software was used to systematically investigate the behavior of the electron beam trajectory when the aforementioned variables were manipulated. The results of the experiment agree with the theoretical simulation results. Each variable has an individual effect on the electron beam focal spot size impinging on the target anode. An optimum condition of the parameters was obtained producing good quality of X-ray images. Also, MWCNT yarn was investigated for field emission characteristics and its contribution in the X-ray generation. The dry spinning method was used to fabricate MWCNT yarn from super MWCNTs, which was fabricated by MW-PECVD. The MWCNT yarn has a significant field emission capability in both diode and the triode X-ray generation structure compared to a MWCNT. The low-voltage-field emission of the MWCNT yarn can be attributed to the field enhancing effect of the yarn due to its shape and the contribution of the high-aspect-ratio nanotubes that protrude from the sides of the yarn. Observations of the use of filters on the development of X-ray images were also demonstrated. The amount of exposure time of the samples to the X-ray was also manipulated. The MWCNT yarn can be a good candidate for use in the low voltage field emission application of X-ray imaging.