• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1383-1384
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1357-1358
• /
• 2011

• 한국식품영양과학회지
• /
• 제44권8호
• /
• pp.1212-1218
• /
• 2015

본 연구는 저온 및 재래식 압출성형 공정에 따른 쌀 야채류 압출성형의 항산화 활성에 대해 분석하였다. 압출성형 조건은 수분 함량 25%, 스크루 회전속도 150 rpm으로 고정하였다. 저온 압출성형 조건은 사출구 온도 $80^{\circ}C$, $CO_2$ 주입량 300 mL/min, 재래식 압출성형은 사출구 온도 $140^{\circ}C$, $CO_2$ 0 mL/min으로 조절하였다. 원료는 쌀 분말에 단호박, 토마토, 딸기 및 녹차 분말을 각각 10%씩 혼합하여 사용하였다. 단호박 및 토마토 첨가한 압출성형물의 DPPH 라디칼 소거능은 저온 압출성형 공정보다 재래식 압출성형 공정에서 더 높았다. 단호박, 토마토 및 딸기를 첨가한 압출성형물은 압출성형 후 총 페놀 함량이 증가하였으며, 저온 압출성형물보다 재래식 압출성형물에서 총 페놀 함량이 다소 높았다. 총 플라보노이드 함량은 녹차를 첨가한 재래식 압출성형물이 18.82 mg/g으로 가장 높았다. 압출성형 후 단호박을 첨가한 압출성형물의 총 카로티노이드 함량은 낮아졌으나 토마토 압출성형물은 증가하였다. 토마토 압출성형물의 라이코펜 함량은 압출성형 후 증가하였으며, 재래식 압출성형에서 더 높았다. 딸기 압출성형물의 안토시아닌 함량은 저온 압출성형보다 재래식 압출성형 공정에서 높았다. 압출성형 후 녹차 압출성형물의 총 클로로필 함량은 감소하였으며 클로로필 a, b 및 총 클로로필은 저온 및 재래식 공정에 따른 유의적인 차이는 없었다.

• 소성∙가공
• /
• 제5권3호
• /
• pp.219-231
• /
• 1996

The current five-stage cold extrusion process to produce an axle-housing is investigated for the purpose of improved process. The main goal of this study is to obtain an appropriate reduced process sequence which can produce the required part most economically without tensile crack-ing workpiece buckling and overloading of the tools. The current process sequence is simulated and design criteria are examined. during the simulation several remeshings are done due to severe mesh distortions, Based on the results of simulations of the current five-stage process, design strategy for improving the process sequence are developed using the thick hollow pipes. The finished product of an axle-housing is produced in two operations and one annealing treatment while the conventional sequence consists of five operations and one annealing treat-ment. Also die loads of the new process are compared with those of the current one.

• 소성∙가공
• /
• 제20권7호
• /
• pp.485-490
• /
• 2011

The application of helical gears in crucial parts of automotive transmissions has been steadily increasing due to their higher power transfer performance compared to spur gears. However, the traditional gear manufacturing methods such as hobbing and deburring require large cycle times with expensive production lines so that there have been intensive efforts trying to manufacture gears via forging processes. Although forging processes for spur and bevel type gears have been developed on the practical level, the manufacturing of helical gears is still dependent on the traditional cutting process. Therefore, this paper seeks to develop a cold forward extrusion process for the helical gear with the pitch diameter of 43.5mm and a helix angle of $18.4^{\circ}$. A forward extrusion process was used due to the relatively small diameter of the target geometry. The material deforming behavior influenced by the die geometry was examined by using CAE analysis. Finally, it was found that the helical gear manufactured by the developed extrusion process satisfied the dimensional accuracy and mechanical characteristics for automotive transmissions.

• 한국식품영양과학회지
• /
• 제33권5호
• /
• pp.899-904
• /
• 2004

압출성형공법을 이용한 수삼의 전처리를 통한 추출수율의 향상과 최적조건에서 열수 추출한 인삼추출액의 첨가량을 달리하여 저온압출공정으로 제조한 구형과립의 입자분포, 마모율, 용적밀도, 진동밀도, 압축지수와 용출패턴을 결정하였다. 열수추출수율에서 수삼을 압출성형할 때 수분함량이 가장 유의적으로 영향을 미쳤다. 수분함량의 감소와 함께 스크류 회전속도가 증가할수록 압출성형 수삼의 추출수율이 크게 증가하였다. 추출수율이 최대가 되는 압출성형 공정변수는 수분함량 15%, 스크류 회전속도 250 rpm, 사출구 부위온도 13$0^{\circ}C$였다. 동일한 추출조건에서 15개 압출성형 수삼 시료의 평균 추출수율(43.5%)은 홍삼(38.3%)과 백삼(29.0%) 추출수율과 비교하여 크게 향상되었다. 저온압출공정으로 압출성형 수삼농축액(고형분함량 59.2%)의 농도를 5, 20, 30, 40, 50, 60%로 각각 증류수에 희석한 용액 200 mL과 200 g 미세결정 셀룰로오즈를 이용하여 과립화시킬 수 있는 압출성형 수삼추출액의 최대 농도는 60%였으며 추출액의 증가와 함께 입자수율의 증가, 마모율의 감소, 압출지수의 감소 등으로 입자의 물리적 특성은 구형과립을 젤라틴 캡슐에 포장하여 제품화할 수 있었다. 또한 압출성형 수삼 추출액을 포함한 구형과립으로부터 농축액 성분이 10분 이내에 쉽게 용출되므로 구형과립은 젤라틴 캡슐에 적합하다는 결론을 내릴 수가 있었다.

• 한국정밀공학회지
• /
• 제32권11호
• /
• pp.977-982
• /
• 2015

This study uses finite element analysis to evaluate the forming load of tool entrance angle of the cold forward extrusion molding process of helical gear; this can replace the spur gear applied to the Electronic Parking Brake (EPB) system. A cold forging process is often used in the automobile industry as well as in various industrial machines due to its high efficiency. Finite element analysis is frequently used when interpreting results of the forging process. Formality was evaluated by calculating tooth profile filling rate of helical gear. Change in required forming load was investigated when the entrance angle of forward extrusion tool die was changed from $30^{\circ}$ to $60^{\circ}$, also by finite element analysis. We suggest suitable tool entrance angles.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.174-184
• /
• 1996

Two methods for cold extrusion processes to produce an axisymmetric steel gear blank are investigated for comparing each other. The "classical" forming method consisting of four operations is selected first to be simulated using the rigid-plastic finite element method and uses single-die presses. The other using a fully automated transfer headers can produce the final part without interannealing. The final products must be checked at the design criteria such as area reduction, the extrusion ratio and punch diameter to depth ratio, especially punch buckling by simulations. FEM analysis is performed mainly for strain distribution, both process sequences are proved to have proper charicteristics suitable for each production method in terms of maximum load. Those simulation results will provide good design criteria in the future work to advance the manufacturing process.

• 소성∙가공
• /
• 제32권1호
• /
• pp.5-11
• /
• 2023

The aim of this study is to manufacture an aluminum pipe yoke of automotive steering system for lightweight. In a multistage cold forging process for aluminum pipe yoke, the surface defects frequently occur due to excessive deformation or friction during extrusion process for forming hollow pipe part. It is import to reduce the friction between the material and the forging die. This study investigated a multistage forging process with sliding die to reduce friction for aluminum pipe yoke. After evaluating by FE analysis, the forging experiment with the sliding die was carried out. As a result, it was possible to manufacture a sound aluminum pipe yoke.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1996년도 제6회 학술강연회논문집
• /
• pp.197-205
• /
• 1996

A combined extrusion process studied here consists of forward and backward extrusion, and it is formed in single operation. The metal flow involved in the operation has appeared to be difficult to analyze accurately because of mixed directions of the flow. In this study, conventional two operations of a forward and a backward extrusions is transformed into one operation of mixed extrusion. A process designed by an industry expert is simulated by the rigid-plastic finite element method to investigate the metal flow and defects. In addition to the FEM simulation, experimental analysis has been carried out to confirm the design in industry, which includes material characterization, preliminary expriment, and whole experimental forming operation. The experimental results show that warm forming of extrusion is more desirable than cold working and hot forming in view of grain growth. Also two conditions of lubrication between workpiece and die has been investigated.