• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.231-232
• /
• 2005

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.101-102
• /
• 2006

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.542-543
• /
• 2012

Coherent diffraction imaging (CDI) method using hard x-ray at 5.46 keV was applied to study assembly of Ni and Ni oxide nano structures formed on a Si3N4 membrane. Density distribution of Ni nano-particles was obtained quantitatively with about 15 nm lateral resolution by reconstructing images from the speckle diffraction pattern. In addition, reconstructed images of nickel oxide particles indicated that Ni atoms diffuse out during the oxidation process leaving pores inside the nickel oxide crust. Furthermore, we recognize that really weak phase object, less than 5 nm thickness of Ni residues, can be reconstructed due to the reference particles. We achieved quantitative information of nanometer sized materials and demonstrate the effect of reference particles by using hard x-ray coherent diffractive imaging method.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.466-472
• /
• 2019

A system for continuous-wave coherent Doppler lidar (CW lidar), made up of all-fiber structures and a coaxial transmission telescope, was set up for wind measurement in Hefei (31.84 N, 117.27 E), Anhui province of China. The lidar uses a fiber laser as a light source at a wavelength of $1.55{\mu}m$, and focuses the laser beam on a location 80 m away from the telescope. Using the CW lidar, radial wind measurement was carried out. Subsequently, the spectra of the atmospheric backscattered signal were analyzed. We tested the noise and obtained the lower limit of wind velocity as 0.721 m/s, through the Rayleigh criterion. According to the number of Doppler peaks in the radial wind spectrum, a classification retrieval algorithm (CRA) combining a Gaussian fitting algorithm and a spectral centroid algorithm is designed to estimate wind velocity. Compared to calibrated pulsed coherent wind lidar, the correlation coefficient for the wind velocity is 0.979, with a standard deviation of 0.103 m/s. The results show that CW lidar offers satisfactory performance and the potential for application in wind measurement.

• 대한토목학회논문집
• /
• 제26권2B호
• /
• pp.139-144
• /
• 2006

측벽이 존재하는 개수로 난류흐름에 대한 DNS 자료를 사용하여 레이놀즈 전단응력 및 이차흐름의 생성메커니즘을 규명하였다. 측벽 부근에서 이차흐름의 양상을 보면, 상부 및 하부 모서리 부근에서는 측벽을 향해 침투되는 이차흐름이 형성된 반면, 그 외의 영역에서는 수로 중앙을 향해 분출하는 이차흐름이 형성된 것으로 나타났다. 측벽 부근에서 레이놀즈 전단응력의 분포를 산정하였으며, 고유구조와 연계하여 분석하였다. 사분면 해석에서 측벽을 향해 침투되는 이차흐름이 생성된 영역에서는 쓸기현상이 지배적인 반면, 측벽으로부터 분출되는 이차흐름이 형성된 영역에서는 분출현상이 지배적인 것으로 나타났다. 또한 조건부 사분면 해석을 통해 레이놀즈 전단응력의 생성 및 이차흐름의 양상이 지배적인 고유구조의 방향성에 의해 결정된다는 것을 확인하였다.

• 한국가시화정보학회지
• /
• 제4권1호
• /
• pp.56-61
• /
• 2006

A change of three-dimensional vortical structures on the wake behind a road vehicle has been investigated according to the existence of an air spoiler. To reconstruct the three-dimensional velocity fields, two-dimensional PIV(particle image velocimetry) measurements were performed for lots of the x-y, y-z and z-x planes. Since the isovorticity surface does not represent exactly the vortical structures within the recirculation region due to strong shear flows, the velocity component normal to the x-y plane is obtained by interpolating those velocities in the z-x plane. Then, the ${\lambda}_2-definition$ is applied to visualize the vortices in the recirculation region. As a result, it is found that the air spoiler weakens C-pillar vortices and produces strong wing-tip vortices. Inside the recirculation region, the height and volume of coherent vortices are increased relatively when an air spoiler is equipped. On the other hand, two small coherent vortices are observed in case that an air spoiler is absent.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.26-31
• /
• 2021

The spanwise growth of turbulence structures in turbulent pipe flow was investigated using the direct numerical simulation data of Re_𝜏 = 544, 934 and 3008. Two-point correlations and pre-multiplied energy spectra of streamwise velocity fluctuations were examined along the spanwise direction. The arclength direction is defined as r𝛳, which is useful for an analogy with the spanwise direction for channels or boundary layers; here, r and 𝛳 are the radial distance from the core and the azimuthal angles, respectively. Both analyses showed that the arclength scales increased with increasing the wall-normal distance. It showed that the coherent structures were confined in the core region due to the crowding effect of a circular pipe geometry. The pipe flow simulation could describe a realistic geometrical flow along the azimuthal direction, unlike the simulations of turbulent channel or boundary layer flow using periodic boundary conditions along the spanwise direction. The present results provided the spanwise organization of energy-containing motions over a broad range of scales in turbulent pipe flow.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.567-577
• /
• 2016

The hutches which are installed in the beamline are largely classified into two, i.e XPP (X-ray pump probe) and CXI (Coherent X-ray image). Laser room is installed on the hutch and provides laser to XPP and CXI simultaneously. And two hutches have heavy crane to install some optics equipments. Safety and reliability of hutch structures should be taken into account for the precise operating of the laser facilities, so vibration analysis is essential to do this. The main purpose of vibration analysis is to install hutch structures with large stiffness. We have changed materials specification several times to install hutch structures having strong stiffness. Now hutch structures were installed and checked vibration status at laser room and XPP hutch. The results of laser table and robot arm satisfy vibration criteria. This paper explains about the design and vibration analysis of hutch structures.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.26-27
• /
• 2005

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1464-1469
• /
• 2000

The effects of SiCl$_4$addition on flame structures have been studied in flame hydrolysis deposition (FHD) processes using Coherent anti-Stokes Raman spectroscopy (CARS) and planar laser induced fluorescence (PLIF) to measure temperatures and OH concentrations, respectively. The results demonstrate that even a small amount of SiCl$_4$ addition can change thermal and chemical structures of H$_2$/O$_2$ diffusion flames. When SiCl$_4$ is added to a flame temperature decreases in non-reacting zone due to the increases in both specific heat and density of the gas mixture, while flame temperature increase in particle formation zone due to the heat release through hydrolysis and oxidation reactions of SiCl$_4$. It is also found that OH concentration decreases dramatically in particle formation zone where temperatures increase. This can be attributed to consumption of oxidative species and generation of HCl during silica formation.