• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.952-957
• /
• 2015

Recently, the interior permanent magnet (IPM) motors for electric vehicle (EV) traction motor are being extensively researched because of its high energy density and high efficiency. The traction motor for EV requires high power and high efficiency at the wide driving region. Therefore, it is essential to fully consider the characteristics of the motor from low speed to high-speed driving regions. Especially, when the motor is driven at high speed, a significant centrifugal force is applied to the rotor. Thus, the rotor must be stably structured and be fully endured at the critical speed. In this paper, aims to examine the characteristics of the IPM motor by adjusting the width of air-barrier according to the permanent magnet position which is critical in designing an IPM motor for EV traction motors and to conduct a centrifugal force analysis for grasping mechanical safety.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.69-77
• /
• 2017

To empower safe, economical and eco-friendly sustainable solution for enhancing oil and gas productivity from deep water reservoirs, new downhole technologies are recommended. Since electric machine plays leading role in the downhole application, it is a squeezing requirement for researchers to design and develop advanced electric machine. The Recent improvement in technology and uses of high-temperature magnets, permanent magnet flux switching machine (PMFSM) has become one of the appropriate contenders for offshore drilling but fewer designed for downhole due to ambient temperature. Therefore this comprehensive study deals with the design optimization and performance analysis of outer rotor PMFSM for the downhole application. Preliminary, the basic design parameters needed for machine design are calculated mathematically. Then the design refinement technique is implemented through deterministic method. Finally, initial and optimized performance of the machine is compared and as a result the output torque is increase from 16.39 Nm to 33.57 Nm while diminishing the cogging torque and PM weight up to 1.77 Nm and 0.79 kg, respectively. Therefore, it is concluded that purposed optimized design is suitable for the downhole application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.65-67
• /
• 2008

An adaptive response surface method with Latin Hypercube sampling strategy is employed to optimize a magnet pole shape of large scale BLDC motor to minimize the cogging torque. The proposed algorithm consists of the multi-objective Pareto optimization and ($1+{\lambda}$) evolution strategy to find the global optimal points with relatively fewer sampling data. In the adaptive RSM, an adaptive sampling point insertion method is developed utilizing the design sensitivities computed by using finite element method to set a reasonable response surface with a relatively small number of sampling points. The developed algorithm is applied to the shape optimization of PM poles for 6MW BLDC motor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.305-308
• /
• 2005

Linear motor has been developed for linear motion of machine tools. Linear motor is useful to design the linear motion, high speed and high accuracy, because of the simple system not required the additional mechanical part such as coupling and ballscrew. This paper tested performance of linear motor such as velocity response, position tracing performance, subordinate Traction force change and positional accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.969-970
• /
• 2011

본 논문은 표면부착형 영구자석 동기전동기(Surfacemounted Permanent Magnet Synchronous Motor)의 영구자석 offset의 변화와 노치(notch)의 적용에 따른 코깅토크 저감 특성을 분석하고, 중심합성계획법(Central Composite Design)을 이용한 최적 모델 설계에 대한 연구이다. 영구자석 offset만 적용한 모델의 경우 코깅토크의 피크-피크값은 95%로 크게 저감되었지만 정격전류 인가시 평균토크의 감소율이 12.3%로 출력 손실이 크기 때문에 최적 설계를 통해 추가적으로 노치를 적용하고 영구자석 Offset을 조절함으로써 코깅토크 저감율을 96.5%로 개선시킬 수 있었고, 평균토크의 감소율은 7.7%로 영구자석 offset만 적용한 모델보다 평균토크의 감소량이 작아진 것을 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2307-2316
• /
• 2017

The aim of this paper is to provide an optimal design of in-wheel motor for an electric scooter (E-scooter) considering economical production. The preliminary development in-wheel motor, which has a direct-driven outer rotor type attached to the E-scooter's rear wheel without any gear, is introduced first. The objective of the optimal design of this in-wheel motor is to improve the output characteristics of the motor and to have a stator form to facilitate automatic winding. Response surface methodology was used for the optimal design and 2-dimensional finite element method was used for electro-magnetic field analysis. Experimental results showed that the designed and fabricated in-wheel motor could satisfy the required specifications in terms of speed, power, efficiency, and cogging torque.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.609_610
• /
• 2009

This paper deals with experimental verifications and the electromagnetic characteristics analysis of multi-pole permanent magnet (PM) generator for small-scaled wind power system. Field distribution due to PMs and winding current, cogging torque considering skew effect are analyzed. In addition, using the equivalent circuit method and dynamic d-q method, generating performance analysis is performed. Analysis results are validated by comparison with nonlinear finite element analyses and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.646_647
• /
• 2009

소형 다상 외전형 BLDC 전동기의 코깅토크를 최소화하기 위해 코깅토크의 발생원인 중 하나인 영구자석의 형상에 샘플링 포인트 기법인 LHS를 이용한 최적화 알고리즘을 적용하여 코깅토크를 최소화하는 최적 설계를 수행 하였다. 총 3번의 반복계산을 하여 코깅토크가 최소화 되는 최적점을 계산한 결과,최대 코깅토크가 0.20 [N.m]에서 0.15 [N.m]로, 초기 형상의 약 75%로 감소되었다

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.215-215
• /
• 2011

본 논문은 상용차용 전동 쿨링팬 모듈의 개발을 위한 5kW급 브러시리스 DC 전동기에 관하여 기술한다. 개발 대상전동기는 정격 3,000rpm의 회전속도를 목표로, 기존 팬 쉬라우드에 장착 가능한 박형으로 설계되며, 코깅토크 저감을 위한 회전자와 고정자 형상 최적화를 수행하여, 구동시 소음과 진동을 감소시키고자 하였다. 전동기를 제작하여 입출력 특성을 분석하고, 최종적으로 기 개발된 팬 블레이드와 결합하여, 쿨링팬 시스템의 유량 및 유압 특성시험을 진행하였다.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.772-777
• /
• 2017

In this paper, the goal of optimization design is efficiency increase and vibration optimization. For this purpose, shape optimization design was performed using Quasi-Newton method, which is one of optimization techniques, and it was verified through finite element analysis In addition, modal analysis of the stator was performed to estimate the natural frequency. through the vibration experiment, the vibration was verified for cogging torque and RMF analysis. Finally, optimal and basic models were compared and analyzed for efficeincy characteristics.