• Journal of Animal Science and Technology
• /
• 제44권5호
• /
• pp.523-530
• /
• 2002

본 연구는 1999년 8월부터 2000년 2월까지 공인 제2종돈능력검정소에서 검정 종료된 Duroc종, Landrace종 및 Yorkshire종에 대하여 체중, 등지방두께, 일당증체량 및 정육율을 측정하여, 동일 개체의 반복측정치 간의 반복력과, 상관 및 순위상관을 추정하였으며, 그 결과를 요약하면 다음과 같다. 1. 평균능력은 측정시 체중이 각각 91.0, 114.7, 123.2kg이였으며, 측정시 일령은 각각 142.1, 173.7, 182.5일이였으며, 정육율은 각각 57.9, 56.2, 55.2%였으며, 등지방두께는 각각 1.33, 1.61, 1.63cm였으며, 일당증체량은 각각 946.6, 879.2, 879.4g으로 나타났다. 2. 각 형질의 측정차수간 상관은 정육율의 경우, 1차와 2차, 1차와 3차, 2차와 3차간 각각 0.493, 0.471, 0.619로 나타났고, 등지방두께의 경우, 각각 0.424, 0.424, 0.700으로 나타났으며, 일당증체량의 경우, 각각 0.716, 0.601, 0.861로 모든 형질에서 1차와 2차간, 1차와 3차간 보다는 2차와 3차간에 높게 추정되었다. 3. 각 측정차수의 형질간 상관은 1차 측정의 경우, 정육율과 등지방두께, 정육율과 일당증체량, 등지방두께와 일당증체량이 각각 －0.597, －0.291, 0.303으로 나타났고, 2차 측정의 경우, 각각 －0.667, －0.292, 0.396으로 나타났으며, 3차 측정의 경우, 각각 －0.711, －0.369, 0.409로 정육율과 등지방두께 및 일당증체량은 부의 상관관계에 있으며, 등지방두께와 일당증체량은 정의 상관관계에 있고, 일령이 증가할수록 상관이 높게 추정되었다. 4. 각 형질의 반복력 추정치를 살펴보면, 등지방두께가 0.374, 정육율이 0.428, 일당증체량이 0.673으로 추정되었으며, 일당증체량의 반복력은 상당히 높게 추정되어, 110kg까지 검정의 필요성이 인정되지 않으나, 등지방두께와 정육율의 추정치는 낮게 추정되어 더욱 많은 연구가 필요할 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권5호
• /
• pp.597-602
• /
• 2001

This study was conducted to examine the relationships between the methods used to determine the number of transferable embryos collected per flush and the estimated cumulative genetic improvements in the Japanese Holstein MOET breeding population. Cumulative genetic improvements were predicted by Monte Carlo simulation using three different determination methods (MODEL 1, MODEL 2, and MODEL 3), for calculating the number of embryos collected per flush. Moreover EBVs were estimated including or ignoring coefficients of inbreeding in MME. Inbreeding coefficients were also predicted. The number of transferable embryos was determined using normal, gamma, and Poisson distributions in MODEL 1, gamma and Poisson distributions in MODEL 2, and only the Poisson distribution in MODEL 3. The fitness of MODEL 2 in relation to field data from Hokkaido Japan was the best, and the results for MODEL3 indicated that this model is unsuitable for determining the number of transferable embryos. The largest cumulative genetic improvement (3.11) in the 10th generation was predicted by MODEL 3 and the smallest (2.83) by MODEL 2. Mean coefficients of correlation between the true and estimated breeding values were 0.738, 0.729, and 0.773 in MODELS 1, 2, and 3, respectively. It is suggested that the smallest genetic improvement in MODEL 2 resulted from the smallest correlation coefficient between the true and estimated breeding values. The differences in milk, fat, and protein yields between MODELS 2 and 3 were 182.0, 7.0, and 5.6 kg, respectively, in real units when each trait was independently selected. The inbreeding coefficient was the highest (0.374) in MODEL 2 and the lowest (0.357) in MODEL 3. The effects of different methods for determining the number of transferable embryos per flush on genetic improvements and inbreeding coefficients of the simulated populations were remarkable. The effects of including coefficients of inbreeding in MME, however, were unclear.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.550-557
• /
• 1998

The saturated vapor density correlation proposed here relates logarithmic density to the inverse of temperature. Its performance is examined correlating the date listed in the ASHTAE tables for 40 refrigerants. The correlation equation is valid over the entire range where data point exist and gives better results than a conventional equation with the same number of adjustable coefficients. Number of terms in the equation is a variable so that great flexibility can be given to the representation of data.

• Communications for Statistical Applications and Methods
• /
• 제26권3호
• /
• pp.305-313
• /
• 2019

Generalized canonical correlation analysis (GCCA) extends the canonical correlation analysis (CCA) to the case of more than two sets of variables and there have been many studies on how two-set canonical solutions can be generalized. In this paper, we derive certain stationary equations which can lead the higher-order solutions of several GCCA methods and suggest a type of iterative procedure to obtain the canonical coefficients. In addition, with some numerical examples we present the methods for graphical display, which are useful to interpret the GCCA results obtained.

• Plant Resources
• /
• 제5권3호
• /
• pp.196-201
• /
• 2002

This study was conducted to investigate the relationships between yearly variations of climatic elements and yearly variations of productivity in sesame. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1992 to 2001. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly variation of the amount of precipitation in July and September were large with coefficients of variation(c.v.) of 64.59, 92.47%, respectively, but the variation of the average temperature in June and August were relative small. Yield and plant height greatly with c. v. of 26.24, 23.41 %, respectively, 1, 000 grain weights show more or less c.v. of 3.83% and length capsule setting show still less variation. Correlation coefficients between maximun temperature in period of cultivation(from June to September) and yield are positively significant at the level of 5.1 %, respectively. Correlation coefficients amount the plant height, length capsule setting, number of capsules per plant, weight of 1, 000 grains and seed yield were positively significant at the level of 1 %, respectively. Simple linear regression equations by the least square method are estimated for number of capsules per plant(Y$_1$) and the maximun temperature in August(X) as $Y_1$=10.1255+0.1725X, and for yield(Y$_2$) and the maximun temperature in August(X) as $Y_2$=21.6151 + 1.3724X.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.65-74
• /
• 2004

The heat transfer coefficient and pressure drop of $CO_2$(R-744) during gas cooling Process of carbon dioxide in a horizontal tube were investigated experimentally and theoretically. The experiments were conducted without oil in the refrigerant loop. The main components of the refrigerant loop consist of a receiver. a variable-speed pump. a mass flowmeter, an evaporator. and a gas cooler(test section). The main components of the water loop consist of a variable-speed Pump. an constant temperature bath. and a flowmeter. The gas cooler is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus The test section consists of smooth, horizontal stainless steel tube of 9.53 mm outer diameter and 7.75 mm inner diameter. The length of test section is 6 m. The refrigerant mass fluxes were 200 ~ 300 kg/($m^2{\cdot}s$) and the inlet pressure of the gas cooler varied from 7.5 MPa to 8.5 MPa. The main results were summarized as follows : The predicted correlation can evaluated the R-744 exit temperature from the gas cooler within ${\pm}10%$ for most of the experimental data, given only the inlet conditions. The predicted gas cooley capacity using log mean temperature difference showed relatively food agreement with gas cooler capacity within ${\pm}5%$. The pressure drop predicted by Blasius estimated the pressure drop on the $CO_2$ side within ${\pm}4.3%$. The predicted heat transfer coefficients using Gnielinski's correlation evaluated the heat transfer coefficients on the $CO_2$ side well within the range of experimental error. The predicted heat transfer coefficients using Gao and Honda's correlation estimated the heat transfer coefficients on the coolant side well within ${\pm}10\;%$. Therefore. The predicted equation's usefulness is demonstrated by analyzing data obtained in experiments.

• 한국환경과학회지
• /
• 제28권6호
• /
• pp.571-579
• /
• 2019

In this study, monthly average values of BOD, COD, and TOC observed for 10 years (2008-2017) in the Nam River were estimated, and monthly variations of BOD, COD, and TOC were analyzed. Monthly average COD was always higher than monthly average BOD; monthly average TOC was high from June to September when rainfall was high. Monthly correlation coefficients between BOD and COD ranged from 0.57 to 0.94, those between BOD and TOC from 0.45 to 0.93, and those between COD and TOC from 0.75 to 0.93. The correlation coefficients were high from November to February when rainfall was low. Regression analyses for monthly average water quality data of the Nam River classified into dry season (October to April) and wet season (May to September) were conducted. Correlation coefficients were higher in the dry season than those in the wet season, and the determination coefficients of linear regression functions for BOD and COD with TOC were also higher in the dry season than those in the wet season. From this study, it can be concluded that it is appropriate to use monthly data to analyze the correlations among BOD, COD, and TOC in the stream. To analyze the relationship between TOC flowing into the stream and BOD/COD, it was found that seasonal characteristics should be considered.

• 대한의용생체공학회:의공학회지
• /
• 제42권4호
• /
• pp.143-149
• /
• 2021

In order to predict and prevent the disease of the abdominal aorta, which is the largest artery in the human body and the most common aneurysm, the normal arterial blood flow operation should be considered. To this end, we are trying to solve problems that may arise in the future by executing FSI based on the data obtained from 4D flow MRI. However, to match the similarity between the 4D flow MRI flow and the FSI flow, correlation was used in previous papers, but the correlation did not show the degree of agreement. Therefore, in this paper, we analyzed the correlation between the 4D flow MRI flow velocity of the human abdominal aorta and the two-way FSI flow velocity in which the three physical properties used for the aortic FSI were added to the CT abdominal aorta 3D model and the interclass correlation coefficient. As a result, the physical property M2 showed the highest similarity in correlation and intraclass correlation coefficient, and this property is intended to be helpful in the future study of the abdominal aortic two-way FSI flow rate.

• Restorative Dentistry and Endodontics
• /
• 제38권2호
• /
• pp.98-102
• /
• 2013

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.684-696
• /
• 2017

An investigation of grain size, organic compounds and metal distribution in lakes from Geum river basin (Republic of Korea) was conducted in two years (2014 and 2015). The samples of sediment were collected from the 3 lakes (12 sites). The samples were analyzed the concentration of metals (Pb, Zn, Cu, Cr, Ni, As, Cd, Hg, Al, and Li) and general indices including grain size. Spearman correlation coefficients were determined using general indices and metal concentrations respectively. The organic qualities of sediments were improved in 2015 compared with 2014. The concentrations of metals were lower than Sediment Criteria of Lakes in Korea. The significant Spearman correlation coefficients were presented only sand-clay, clay-water content, COD-TOC, Cu-Ni, Cd-Li, Zn-Li, and Cr-Ni of general and metal parameters in 2014, 2015 and both of two years.