• 한국화재소방학회논문지
• /
• 제21권3호
• /
• pp.91-96
• /
• 2007

수계소화시스템 버터플라이 밸브의 성능해석에 대한 연구를 수행하였다. 버터플라이 밸브의 성능해석으로는 토크특성, 압력손실과 캐비테이션을 고찰하였다. 밸브의 토크특성은 토크 이론식에 밸브 디스크의 개도각이 보정되었고, 보정식이 추가되었다. 밸브의 열림각에 대한 압력손실계수는 Carnot 방정식을 응용하여 수식화하였다. 버터플라이 밸브의 토크특성, 압력손실과 캐비테이션은 디스크의 두께와 직경 비에 대해 해석하였다. 캐비테이션은 밸브의 압력손실계수로부터 해석하였다. 압력손실과 캐비테이션 해석은 밸브의 열림각에 대한 두께 비의 변화에 따라 수행하였다. 이들 해석 데이터는 버터플라이 밸브를 개발하는데 필요한 엔지니어링 데이터로 활용하고자 한다.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.109-115
• /
• 2019

The purpose of this study was to analyze and test the flow rate of a 1-inch ball valve used in a thermal power plant. To identify the flow-rate characteristics, numerical analysis was conducted and an experimental apparatus of the valve flow rate coefficient was used to compare the flow coefficient Cv values. To determine the internal pressure distribution, the sites of opening ball valves and flow fields were investigated. In particular, a smaller the valve opening resulted in a more complicated the flow field of the ball. The valve flow characteristic test showed that the Cv value and flow rate increased with increasing valve-opening rate and the secondary function was performed. The pressure drop increased as the valve opening rate decreased. In addition, the experimental results for the flow analysis are similar to the numerical analysis results.

• 토지주택연구
• /
• 제11권4호
• /
• pp.15-26
• /
• 2020

This study analyzes the Domestic Economic Ripple Effect (DERE) of the Donghae-Bukpuseon Railway (DBR). Input-Output Analysis and Scenario Analysis are employed. First, the future demand is approximately 6.86 billion people, 1.4 billion tons of logistics, and future forecast production is 1.2 trillion won for passengers, and 0.15 trillion won for logistics. Second, the production inducement (PI) coefficient of the railway industry is 2.080, the value-added inducement (VAI) coefficient is 0.680, the import inducement (II) coefficient is 0.32 and the employment inducement (EI) coefficient is 6.45. Third, for the DERE, PI is 2.846 trillion won, VAI is 0.939 trillion won, II is 0.446 trillion won, and EI is 8,737 people/1 billion won. Fourth, PI is approximately 2.8 trillion won, and the payback period is 35 years. Scenario 1 (a 50% increase in the demand for tourism) takes approximately 27 years, Scenario 2 (an 100% increase), 20 years, and Scenario3 (an 150% increase), 16 years. The successful way of the DBR is to enlarge the linkage effect of trans-railways for which international cooperation and agreements are needed. Also, even if the DBR is isolated due to worsening inter-Korea relations, the development of tourism resources is important for public investment feasibility.

• 수산경영론집
• /
• 제54권2호
• /
• pp.77-90
• /
• 2023

This study employed the Gini coefficient decomposition analysis to classify and examine fishery household income inequality according to income sources. The raw data from the Fisheries Economic Survey by the National Statistical Office were used for the analysis after equalization according to the recommended method of the OECD. In particular, the Gini coefficient was decomposed by classifying with and without public subsidies, and the contribution, correlation, and marginal effect by income source were presented.As a result of the analysis, the inequality of fishing income and non-fishing income of fishermen was worsening, and the inequality of transfer income was continuously easing. Among them, fisheries subsidies have been analyzed to have the greatest contribution to the Gini coefficient of gross income and the highest relative marginal effect, although distribution inequality has been alleviated. On the other hand, other subsidies, including public pensions, were found to have the opposite contribution, correlation, and marginal effect to fisheries subsidies. The results of this analysis showed that even within public subsidies, the contribution to income redistribution might differ depending on the nature of the subsidy. In addition, in the case of other public subsidies, it can be seen that the transition from selective welfare to universal welfare occurs.

• 한국환경과학회지
• /
• 제22권5호
• /
• pp.563-570
• /
• 2013

Roughness coefficient was computed for review of applicability based on measurement of the representative grain diameter reflecting channel characteristics of Han Stream. After field survey, collection of bed material, and grain analysis on the collected bed material, roughness coefficient was computed using representative grain and existing empirical equation for roughness coefficient. Value of roughness coefficient calculated using equation by Meyer-Peter and Muller (1948) was 0.0417 for upstream, 0.0432 for midstream, and 0.0493 for downstream. As a result of comparing the computed roughness coefficient to other empirical equations for review of applicability, the coefficient was larger in Strickler (1923) equation by 0.006. Smaller coefficient was shown by Planning Report for River Improvement Works. Equation by Garde and Raju (1978) was larger by 0.004, and equations by Lane and Carlson (1953) and by Meyer-Peter and Muller (1948) were larger by 0.001. Such precise roughness coefficient is extremely important when computing the amount of flood in rivers to prevent destruction of downstream embankments and property damages from flooding. Since roughness coefficient is a factor determined by complicated elements and differs according to time and space, continued management of roughness coefficient in rivers and streams is deemed necessary.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.54-60
• /
• 2016

The valve used in nuclear power plant must be qualified but the limitation of the test facility leads to use the numerical analysis. The flow coefficient is calculated with the consideration of the pressure, velocity and geometry. And the flow coefficient is the important physical property which is prepared using experiment or analysis by valve manufacturer. In this study, the analysis model was made according to ISA 75.02.01 and the mass flow rate and pressure drop ratio was calculated. The model of the expansion factor was applied to the simulation result and the pressure drop ratio at the start of the choked flow in the valve was found. With the simulation result, the consideration was performed that the expansion factor is the important physical property to the system engineer in addition to the flow coefficient.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권1호
• /
• pp.147-157
• /
• 2005

본 연구에서는 다양한 지층조건과 압밀특성의 변화를 반영하여, 프리로딩 공법 및 연직배수공법을 독립적 혹은 복합적으로 적용했을 경우 발생할 수 있는 연약지반의 압밀거동을 보다 정확히 예측할 수 있는 방안을 제시하고자 한다. 전체적으로는 수직배수만을 고려한 1차원 압밀현상의 예측과 관련된 내용 및 수직배수와 수평배수를 동시에 고려한 축대칭 압밀현상의 예측에 관한 내용을 포함한 압밀해석 프로그램을 개발하였다. 각 조건별 기본 해석알고리즘의 개발과 함께 이질층에 대한 경계면 방정식 및 유효응력을 함수로하는 압밀계수 함수식을 해석기법에 추가하였다. 이를 이용하여 다양한 경계면 조건과 압밀계수의 변화가 압밀현상에 미치는 영향을 분석하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제23권4호
• /
• pp.643-648
• /
• 2012

여러 임상자료를 이용하여 반응변수와 설명변수간의 관계를 규명하는 분석이 많이 이루어지고 있다. 이를 위해서 회귀분석이 흔히 사용되고 있으며, 이를 통해 설명변수가 반응변수를 얼마나 설명하는지 또한 모형이 얼마나 자료에 적합한지에 대해 분석하고 있다. 그러나 임상자료로 분석된 회귀모형에 대한 타당성 확인은 대부분 분석된 회귀모형이 얼마나 자료를 설명하는가를 나타내는 결정계수만을 살펴보는 것에 그치고 있다. 결정계수 이외의 다른 방법으로도 분석된 회귀모형의 회귀계수에 대한 타당성을 확인할 필요가 있다. 따라서 본 논문에서는 잭나이프 회귀분석과 붓스트랩 회귀분석을 이용하여 임상자료로 분석한 회귀모형의 회귀계수에 대한 타당성을 확인하는 방법을 소개하고자 한다.

• Structural Engineering and Mechanics
• /
• 제90권3호
• /
• pp.273-285
• /
• 2024

Tapered girders emerged as an economical remedy for the challenges associated with constructing long-span buildings. From an economic standpoint, these systems offer significant advantages, such as wide spans, quick assembly, and convenient access to utilities between the beam's shallow sections and the ceiling below. Elastic-local buckling is among the various failure modes that structural designers must account for during the design process. Despite decades of study, there remains a demand for efficient and comprehensive procedures to streamline product design. One of the most pressing requirements is a better understanding of the tapered web plate girder's local buckling behavior. This paper conducts a comprehensive numerical analysis to estimate the critical buckling coefficient for simply supported tapered steel web plates, considering loading conditions involving compression and bending stresses. An eigenvalue analysis was carried out to determine the natural frequencies and corresponding mode shapes of tapered web plates with varying geometric parameters. Additionally, the study highlights the relative significance of various parameters affecting the local buckling phenomenon, including the tapering ratio of the panel, normalized plate length, and ratio of minimum to maximum compressive stresses. The regression analysis and optimization techniques were performed using MATLAB software for the results of the finite element models to propose a separate formula for each load case and a unified formula covering different compression and bending cases of the elastic local buckling coefficient. The results indicate that the proposed formulas are applicable for estimating the critical buckling coefficient for simply supported tapered steel web plates.

• 방사선산업학회지
• /
• 제17권1호
• /
• pp.111-118
• /
• 2023

The International Commission on Radiological Protection (ICRP) 103 recommends a cost-benefit analysis method as an auxiliary tool for scientific and rational decision-making for the principle of optimization of radiological protection. In order to conduct a cost-benefit analysis, the safety improvement of nuclear power by regulation must be measured and converted into monetary terms. The improvement of nuclear safety can be measured by reducing the radiation exposure dose of the people, and it is necessary to determine the coefficient to convert the radiation exposure dose into money. The monetary coefficient is calculated as the product of the statistical life value (VSL) and the nominal risk coefficient. In order to derive the monetary coefficient, the willingness to pay (WTP) can be estimated using the contingent valuation method (CVM), which quantifies the value of non-market goods by converting them into monetary units. WTP can be estimated based on the random utility model, which is the basic model for bivariate selection type conditional value measurement data. Statistical life value can be calculated using the estimated WTP and reduction in early mortality, and a monetary coefficient can be derived.