• 한국농공학회지
• /
• 제16권1호
• /
• pp.3225-3262
• /
• 1974

The purposes of this thesis are to clarify experimentally the variation of ground water temperature in tube wells during the irrigation period of paddy rice, and the effect of ground water irrigation on the growth, grain yield and yield components of the rice plant, and, furthermore, when and why the plant is most liable to be damaged by ground water, and also to find out the effective ground water irrigation methods. The results obtained in this experiment are as follows; 1. The temperature of ground water in tube wells varies according to the location, year, and the depth of the well. The average temperatures of ground water in a tubewells, 6.3m, 8.0m deep are $14.5^{\circ}C$ and $13.1^{\circ}C$, respercively, during the irrigation period of paddy rice (From the middle of June to the end of September). In the former the temperature rises continuously from $12.3^{\circ}C$ to 16.4$^{\circ}C$ and in the latter from $12.4^{\circ}C$ to $13.8^{\circ}C$ during the same period. These temperatures are approximately the same value as the estimated temperatures. The temperature difference between the ground water and the surface water is approximately $11^{\circ}C$. 2. The results obtained from the analysis of the water quality of the "Seoho" reservoir and that of water from the tube well show that the pH values of the ground water and the surface water are 6.35 and 6.00, respectively, and inorganic components such as N, PO4, Na, Cl, SiO2 and Ca are contained more in the ground water than in the surface water while K, SO4, Fe and Mg are contained less in the ground water. 3. The response of growth, yield and yield components of paddy rice to ground water irrigation are as follows; (l) Using ground water irrigation during the watered rice nursery period(seeding date: 30 April, 1970), the chracteristics of a young rice plant, such as plant height, number of leaves, and number of tillers are inferior to those of young rice plants irrigated with surface water during the same period. (2) In cases where ground water and surface water are supplied separately by the gravity flow method, it is found that ground water irrigation to the rice plant delays the stage at which there is a maximum increase in the number of tillers by 6 days. (3) At the tillering stage of rice plant just after transplanting, the effect of ground water irrigation on the increase in the number of tillers is better, compared with the method of supplying surface water throughout the whole irrigation period. Conversely, the number of tillers is decreased by ground water irrigation at the reproductive stage. Plant height is extremely restrained by ground water irrigation. (4) Heading date is clearly delayed by the ground water irrigation when it is practised during the growth stages or at the reproductive stage only. (5) The heading date of rice plants is slightly delayed by irrigation with the gravity flow method as compared with the standing water method. (6) The response of yield and of yield components of rice to ground water irrigation are as follows: \circled1 When ground water irrigation is practised during the growth stages and the reproductive stage, the culm length of the rice plant is reduced by 11 percent and 8 percent, respectively, when compared with the surface water irrigation used throughout all the growth stages. \circled2 Panicle length is found to be the longest on the test plot in which ground water irrigation is practised at the tillering stage. A similar tendency as that seen in the culm length is observed on other test plots. \circled3 The number of panicles is found to be the least on the plot in which ground water irrigation is practised by the gravity flow method throughout all the growth stages of the rice plant. No significant difference is found between the other plots. \circled4 The number of spikelets per panicle at the various stages of rice growth at which_ surface or ground water is supplied by gravity flow method are as follows; surface water at all growth stages‥‥‥‥‥ 98.5. Ground water at all growth stages‥‥‥‥‥‥62.2 Ground water at the tillering stage‥‥‥‥‥ 82.6. Ground water at the reproductive stage ‥‥‥‥‥ 74.1. \circled5 Ripening percentage is about 70 percent on the test plot in which ground water irrigation is practised during all the growth stages and at the tillering stage only. However, when ground water irrigation is practised, at the reproductive stage, the ripening percentage is reduced to 50 percent. This means that 20 percent reduction in the ripening percentage by using ground water irrigation at the reproductive stage. \circled6 The weight of 1,000 kernels is found to show a similar tendency as in the case of ripening percentage i. e. the ground water irrigation during all the growth stages and at the reproductive stage results in a decreased weight of the 1,000 kernels. \circled7 The yield of brown rice from the various treatments are as follows; Gravity flow; Surface water at all growth stages‥‥‥‥‥‥514kg/10a. Ground water at all growth stages‥‥‥‥‥‥428kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥430kg/10a. Standing water; Surface water at all growh stages‥‥‥‥‥‥556kg/10a. Ground water at all growth stages‥‥‥‥‥‥441kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥450kg/10a. The above figures show that ground water irrigation by the gravity flow and by the standing water method during all the growth stages resulted in an 18 percent and a 21 percent decrease in the yield of brown rice, respectively, when compared with surface water irrigation. Also ground water irrigation by gravity flow and by standing water resulted in respective decreases in yield of 16 percent and 19 percent, compared with the surface irrigation method. 4. Results obtained from the experiments on the improvement of ground water irrigation efficiency to paddy rice are as follows; (1) When the standing water irrigation with surface water is practised, the daily average water temperature in a paddy field is 25.2$^{\circ}C$, but, when the gravity flow method is practised with the same irrigation water, the daily average water temperature is 24.5$^{\circ}C$. This means that the former is 0.7$^{\circ}C$ higher than the latter. On the other hand, when ground water is used, the daily water temperatures in a paddy field are respectively 21.$0^{\circ}C$ and 19.3$^{\circ}C$ by practising standing water and the gravity flow method. It can be seen that the former is approximately 1.$0^{\circ}C$ higher than the latter. (2) When the non-water-logged cultivation is practised, the yield of brown rice is 516.3kg/10a, while the yield of brown rice from ground water irrigation plot throughout the whole irrigation period and surface water irrigation plot are 446.3kg/10a and 556.4kg/10a, respectivelely. This means that there is no significant difference in yields between surface water irrigation practice and non-water-logged cultivation, and also means that non-water-logged cultivation results in a 12.6 percent increase in yield compared with the yield from the ground water irrigation plot. (3) The black and white coloring on the inside surface of the water warming ponds has no substantial effect on the temperature of the water. The average daily water temperatures of the various water warming ponds, having different depths, are expressed as Y=aX+b, while the daily average water temperatures at various depths in a water warming pond are expressed as Y=a(b)x (where Y: the daily average water temperature, a,b: constants depending on the type of water warming pond, X; water depth). As the depth of water warning pond is increased, the diurnal difference of the highest and the lowest water temperature is decreased, and also, the time at which the highest water temperature occurs, is delayed. (4) The degree of warming by using a polyethylene tube, 100m in length and 10cm in diameter, is 4~9$^{\circ}C$. Heat exchange rate of a polyethylene tube is 1.5 times higher than that or a water warming channel. The following equation expresses the water warming mechanism of a polyethylene tube where distance from the tube inlet, time in day and several climatic factors are given: {{{{ theta omega (dwt)= { a}_{0 } (1-e- { x} over { PHI v })+ { 2} atop { SUM from { { n}=1} { { a}_{n } } over { SQRT { 1+ {( n omega PHI) }^{2 } } } } LEFT { sin(n omega t+ { b}_{n }+ { tan}^{-1 }n omega PHI )-e- { x} over { PHI v }sin(n omega LEFT ( t- { x} over {v } RIGHT ) + { b}_{n }+ { tan}^{-1 }n omega PHI ) RIGHT } +e- { x} over { PHI v } theta i}}}}{{{{ { theta }_{$\infty$ }(t)= { { alpha theta }_{a }+ { theta }_{ w'} +(S- { B}_{s } ) { U}_{w } } over { beta } , PHI = { { cpDU}_{ omega } } over {4 beta } }}}} where $\theta$$\omega$; discharged water temperature($^{\circ}C$) $\theta$a; air temperature ($^{\circ}C$) $\theta$$\omega$';ponded water temperature($^{\circ}C$) s ; net solar radiation(ly/min) t ; time(tadian) x; tube length(cm) D; diameter(cm) ao,an,bn;constants determined from $\theta$$\omega$(t) varitation. cp; heat capacity of water(cal/$^{\circ}C$ ㎥) U,Ua; overall heat transfer coefficient(cal/$^{\circ}C$ $\textrm{cm}^2$ min-1) $\omega$;1 velocity of water in a polyethylene tube(cm/min) Bs ; heat exchange rate between water and soil(ly/min)

• 한국작물학회지
• /
• 제15권
• /
• pp.1-31
• /
• 1974

소맥의 조숙품종육성을 위하여는 춘파성품종의 조숙인자를 추파성품종에 도입하는 것이 중요한 과제이므로 춘추파성 소맥품종의 일장과 온도조건에 따른 출수반응 및 출수기를 지배하는 생리적 요인의 구명과 출수기의 유전에 관한 지견을 얻고저 본실험을 실시하였다. 수원 작물시험장 전작포장 및 온실에서 1970년부터 조숙품종 Yecora F70, 중숙품종 수계 169호, 육성 003 만숙품종 장광, Bezostaia, Sturdy, Blueboy 등 8개품종을 상호교배하여 1972년부터 1973년에 온실 및 초자실을 이용하여 양친과 Diallel cross F$_1$을 고온장일, 고온단일, 저온장일, 저온단일의 4처리조건 및 포장조건에서 3조합의 F$_1$, F$_2$, BC$_1$, BC$_2$ 및 양친들은 고온단일조건에서 F$_1$, F$_2$ 9조합 및 그 양친은 포장에서 각각 재배 실험하였다. 그 결과를 요약하면 다음과 같다. 1. 춘화 처리후의 주요엽수는 일장 및 온도조건에 관계없이 일정하였으나 주간의 출엽속도에만 영향을 주었으며 춘파성품종은 추파성품종보다 주간엽수가 적었다. 2. 지엽전개일수의 일장 및 온도반응은 출수속도에 의하여 결정되며 일장과 온도에 따른 출엽속도의 차이는 하위엽보다 상위엽에서 컸다. 3. 춘화처리후의 출수기에 대한 생리적 요인은 일장반응과 순수조만생이며, 출수일수의 품종간 변이는 고온단일에서 가장 크고 포장조건에서 가장 적었으며 고온장일, 저온장일, 저온단일을 비슷하였다. 4. 일장차이에 의한 출수일수의 품종간 반응은 장광, Parker가 크고, Yecora F70, 수계 169 호 등 기타 품종들은 비교적 적었으며, 장광, Parker는 단일이 의하여 출수일수가 크게 지연되는 감광성 품종이었다. 5. 일장반응은 온도의 영향을 크게 받고 출수일수의 품종간차이는 저온일 빼보다 고온일 때 현저히 나타났다. 6. 온도차이에 의한 출수일수의 품종간 반응은 비슷하였으며, 어떠한 품종이라도 고온에 의하여 출수가 촉진되고 저온에 의해서 지연되었다.7. 출수일수에 대한 유전은 일장 및 온도조건이 변하여도 조숙은 만숙에 대하여 부분우성이었으며, 우성의 정도는 단일에서 크고 장일에서 적었다. 8. 고온장일조건에서 출수일수의 품종간 차이는 수수조만성의 차이라고 할 수 있으며, 춘파성품종인 Yecora F70은 추파성품종에 대하여 우성정도가 컸고 추파성품종간에는 우성정도가 없거나 적었다. 이때의 유효 우성 유전자수는 1쌍의 대립유전자에 의해서 지배되나 다소의 미동유전자가 관여되었다. 9. 출수일수에 관여하는 비감광성은 감광성에 대하여 우성단인자차에 의하여 지배되었고 저온조건에서는 단일감응성의 발현정도가 둔화 또는 억제되었다. 10. 순수 조만성과 단일감응성은 모두 조숙이 만숙에 대하여 부분우성으로 표현되었다. 11. 출수기에 관여하는 감온성의 품종간반응은 대립유전자 및 비대립유전자의 지배를 받으며 같은 대립유전자를 가진 품종군에서는 비감온성이 감온성에 대하여 우성으로 표현되나 일장 및 순수 조만성보다는 그 정도가 미미하다. 12. 장광과 수계 169호 사이에는 감광성에 관여하는 1쌍의 대립인자 ee와 EE에 의하여 조만이 결정되었고, 장광과 Yecora F70사이에는 ee, enen과 EE, EnEn의 2쌍의 대립인자에 의하여 지배된다고 추정되었다. 이때 EE와 EnEn는 조숙방향에 상가적으로 작용하여 단일조건하에서는 EE의 효과가 EnEn의 효과보다 크다. 장일 조건하에서는 EE의 효과는 나타나지 않고 EnEn효과만 발현된다. En과 en 사이에 우열관계는 E와 e 사이보다 적고 상가적 작용을 하고 있다고 본다. 13. 본 실험의 포장조건에서는 2개정도의 우성주동유전자를 가정할 수 있으나 생육초기의 저온단일과 생육후기의 고온장일의 영향으로 2개의 우성유전자 표현이 불확실하며 F$_2$분리에 있어서는 일장 및 온도의 영향과 미동유전자의 영향으로 연속변이를 하였다. 14. 출수일수의 유전력은 0.51-0.72로서 어느 조건에서나 높은 경향으로 초기세대의 선발효과가 큰 것으로 인정되었으며, 환경에 의하여 다소의 차이가 있어 장일보다는 단일에서 유전력이 컸고, 저온보다는 고온에서 큰 경향이었다. 또한 감광성의 유전력은 0.86-0.76으로 컸으나 온도효과의 유전력은 적었다. 15. 출수기가 빨라지므로서 1수입수, 천입중, 수량이 낮아지는 상관관계를 보여 조숙다수성 품종선발이 어렵다는 결과를 보였으나 수수와는 부의 상관(유의성은 없음)을 보여 조숙품종으로서 수수형 품종을 선발하면 수량을 올릴수 있는 약간의 가능성도 보였다.

• 대한간호학회지
• /
• 제22권1호
• /
• pp.81-115
• /
• 1992

The problem addressed by this study was to determine the effect of nurse - patient agreement on the means to achieve nursing goals in the early postpartum period of primiparous mothers. It was hypothesized that the experimental treatment would result in hegher self-confidence and satisfaction in maternal role performance. This purpose was to contribute to the planning of nursing care to enhance self- confidence and satisfaction in maternal role performance and to the development of relevant nursing theory. Especially, the early postpartum period is crucial toward in recovery from childbirth and attainment of the maternal role. Maternal role attaintment is a complex social and cognitive process of stimulus -response accomplished by learning. Most women attain the maternal role sucessfully. But, some primiparous mothers experience difficultites in attainment of the maternal role due to lack of experience and knowledge. Self-confidence and satisfaction in maternal role performance are important factors in attainment and adjustment to the maternal role (Mercer, 1981a, 1981b ; Lederman, Weigarten, and Lederman, 1981 :Bobak and Jensen, 1985). Nursing is defined as behaviors of nurses add patients that attain nursing goals through action, reaction, interaction, and transaction. For attainment of nursing goals, active participating transactions must occur by agreement on the means to achieve those goals through nurse -patient mutual goal setting and establishment of their active relationships(King, 1981, Ha, 1977). Based on King's theory of goal attainment (1981), this stuy was planned as a non-equivalent control group, non -synchronized quasi -experimental design using agreement on the means to achieve nursing goals in early postpartum as the experimental treatment. The data were collected from July 20 to Sep. 1, 1991 by questionnaires with 60 primiparous mothers planing to breast feed after normal deliveries at W hospital in Pusan, Korea. The subjects were divided into a control group(conventional group) -those admitted from July 20 to Aug. 12, and an experimental group(agreement group) - those admitted from Aug. 13 to Sep. 1. The instument for agreement on the means to nursing goals in the early postpartum period included five steps - identification of disturbances of problems through action, reaction, and interaction with primiparous mothers : mutual early postpartal nursing goal setting : exploration of the means to achieve goals ; agreement on the means (self- care, ealry maternal -infant contact, performance of mothering behavior, and communicating about the infant's behavior and health condition) : implementation of the means. This instrument was developed on the basis of King's elements that lead to transactions in nurse-patient interactions. Lederman et al's (1981) scale for Confidence in ability to cope with tasks of motherhood and Lederman et al's(1981) scale for Mother's satisfaction with motherhood and infant care were used to measure self-confidence and satisfaction in maternal role performance ·with the subjects immediately after admission and on the day of discharge. Self-care performance in the experimental group was measured by self -evaluation tool developed by the investigator from the literature concerned. The tools to measure Pelf-confidence and satisfaction in maternal role performance, and the tool to measure self-evaluation of self-care performance were tested for internal reliability. Cronbach's Alphas were 0.94, 0.94, and 0.63. The data were analysed by using in S.P.S.S. computerized program and included percentage, x²-test, t-test, ANOVA, and Pearson Correlation Coefficient. The conclusions obtained from this study are summerized as follows : 1. The degree of self-confidence in maternal role performance of the total subjects group measured before the experimental treatment was above average with a mean score of 2.77(range 2.14-3.64). Out of 14 items, those with relatively high mean scores were ‘I would like to be a better mother than I am’(3.95), and ‘I have my doubts about whether I am a good mother’(2.87). Those with low mean scores were ‘I know that my baby wants most of the times’(2.28), ‘When the baby cries, I can tell what she /he wants’(2.37), and ‘I have confidence in my ability to care for the baby’(2;50). That is, the self - confidence of Primiparous mothers was considerably high in mothering, but rather low in activities concerning the infant care and understanding of the infant behavior. The degree of satisfaction in maternal role performance of the total subjects group measured before the experimental treatment was high with a mean score of 3.18(range 1.92-3.92). Out of 13 items, those with relatively high mean scores were ‘I am glad 1 had this baby now’(3.75), ‘I play with the baby between feedings when s/he is awake and quiet’(3.67), and ‘I enjoy being a mother’(3.27). Those with low mean scores were ‘I am upset about having too many responsibilities as a mother’(2.78), ‘It bothers me to get up for the baby at night’(2.82), and ‘I get annoyed if the baby frequently interrupts my activities’.(2.82), That is, the satisfaction of primiparous mothers was considerably high in mothering and infant care, but rather low in restraints in time or on the mother's self accomplishment and development. 2. Agreement on the means to achieve nursing goals in the early postpartum period included process of mutual goal setting, exploration of the means to achieve goals, and ahreement in concert means to achieve goals based on the mothers' condition, concerns, self-perception of the nurse - patient interactions. In the process of agreement, there was agreement that the means to achieve goals should be through trust and establishment of active relationships with the nurse through identification of problems according to planned nursing goals and active interaction, such as explanations, teaching, changing of opinions, acceptance or rejection of explanations, and proposing of questions. Therefore agreement on the means to achieve nursing goals in the early postpartum period appears to be an effective nursing intervention for primiparous mothers. 3. The degree of self- confidence in maternal role performance of the exprimental group was higher than that of the control group(t＝3.95, p＜0.01). Out of 14 items, those with higher score in the experimental group were ‘I would like to be a better mother than I am’(t＝1.93, p＜0.05), ‘I know that my baby wants most of the times’(t＝2.75, p＜0.01), ‘When the baby cries, 1 can tell what she/he wants’(t＝2.10, p＜0.05), ‘I have confidence in my ability to care for the baby’(t＝3.72, p＜0.01), ‘I trust my own judement in deciding how to care for the baby’(t＝1.96, p＜0.05), ‘I feel that I know my baby and what to do for him /her’(t＝2.44, p＜0.01), ‘I am concerned about being able to meet the baby's needs’(t＝2.87, p＜0.01), ‘I know what my baby likes and dislikes’(t＝3.26, p＜0.01), ‘I don't know to care for the baby as well as I should’(t＝2.07, p＜0.05), and ‘I am unsure about whether I give enough attention to the baby’(t＝3.04, p＜0.01), That is, the degree of self-confidence in mothering, activities concerning infant care, and understanding of infant behavior of the experimental group was higher than that of the control group. Therefore, the first hypothesis, that the degree of self-confidence in maternal role performance of the experimental group would be higher than that of the control group, was supported(t＝3.95, p＜0.01). 4. The degree of satisfaction in the maternal role performance of the exprimental group was higer than that or the control group(t＝2.31, p＜0.05). Out of 13 items, those with higher score in the experimental group were ‘I am glad I had this baby now’(t＝2.29, p＜0.05), ‘I enjoy taking care of the baby’(t＝2.4g, p＜0.01), ‘It is boring for me to care for the baby and do the same thing over and over’(t＝2.87, P＜0.01), ‘I am unhappy with the amount of time I have for activities other than childcare’(t＝2.51, p＜0.01), and ‘When bathing and diapering the baby, I would like to be doing something else’(t＝2.43, p＜0.01). That is, the degree of satisfaction in mothering, infant care, and restraints in time of on the mother's self accomplishment and development in the experimental group was higher than that of the control group. Therefore, the second hypothesis, that the degree of satisfaction in maternal role performance of the experimental group would be higher than that of the control group, was supported(t＝2.31, p＜0.05). 5. The third hypothesis, that the higher the degree of satisfaction in materenal role performance, the higher the degree of self-confidence in materenal role performance in the experimental group, was supported (r＝0.57, p＜0.01)

• Applied Biological Chemistry
• /
• 제17권3호
• /
• pp.193-218
• /
• 1974

본(本) 연구(硏究)는 산도(酸度)가 극(甚)히 높고 수도(水稻)의 생육(生育)이 저조(低調)하며 수량(收量)이 낮은 특이산성답(特異酸性畓) 토양(土壞)에 대(對)한 특성조사(特性調査)와 그 개량(改良)의 목적(目的)으로 석회(石灰)를 시용(施用)하였을 때 토양(土壞)의 화학적(化學的) 성질(性質)과 수도묘(水稻苗)의 생육(生育)에 미치는 영향(影響)을 검사(檢討) 연구(硏究)하고져 하였다. 즉(則) 특이산성답토양(特異酸性畓土壞)에서 석회(石灰)의 시용(施用)이 그 토양(土壤)의 산도(酸度), 산화환원전위차(酸化還元電位差), 2가철(價鐵), 알루미늄 및 황산함량(黃酸含量)의 변화(變化)와 토양인(土壞燐)의 화학적(化學的) 형태(形態)에 미치는 영향(影響)을 담수(湛水) 및 건조(乾燥)와 같은 환경(環境)의 변화하(變化下)에서 추구(追究)하였으며 한편 수도(水稻)의 묘생육(苗生育)에 대(對)하여 인산(燐酸), 철(鐵) 및 알루미늄의 개량적(改良的) 또는 저해적(沮害的) 효과(效果)를 석회(石灰)의 영향하(影響下)에서 검사(檢討)한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 특이산성답(特異酸性畓) 심토(心土)는 석회(石灰)가 시용(施用)되어도 건조(乾燥)되면 다시 pH가 저하(低下)된다. 2. Eh는 담수(湛水) 5일경(日頃)에 최저(最低)로 되고 석회시용(石灰施用)으로 크게 하강(下降)되나 건조(乾燥)되면 다시 상승(上昇)된다. 3. 수용성(水用性) 및 Morgan 용액가용(溶液可溶) 2 가철(價鐵)의 함량(含量)은 담수(湛水) 15일경(15日頃)에 최고(最高)로 되며 수용성(水用性) 2 가철(價鐵)만이 석회시용(石灰施用)에 의(依)하여 크게 감소(減少)된다. 4. 수용성(水用性) 및 Morgan 용액가용(溶液可溶) 알루미늄 함량(含量)은 담수(湛水)와 석회시용(石灰施用)으로 감소(減少)되며 건조(乾燥)에 의(依)하여 약간 증가(增加)되는 경향(傾向)이다. 5. 석회(石灰)를 시용(施用)한 특이산성답(特異酸性畓) 토양(土壞)에서 수용성(水用性) 석회(石灰)와 황산함량(黃酸含量) 간(間)에는 고도(高度)의 유의성(有意性) 있는 부상관(負相關) 관계(關係)가 있으며 석회시용(石灰施用)은 토양(土壞)의 황산함량(黃酸含量)을 감소(減少)시킨다. 6. 전린(全燐)은 특이산성답(特異酸性畓) 표토(表土)에서 496.3ppm, 심토(心土)에서 387.5ppm이었으며 무기인(無機燐)의 함량(含量)은 Fe-P>Occ.Fe-P>Ca-P>Occ.Al-P>Al-P 의 순(順)으로 Fe-P가 가장 많았다. 7. 석회시용(石灰施用)은 토양(土壞)의 Ca-P나 Al-P 등(等)을 크게 증가(增加)시키고 Occ. Fe-P와 Occ. Al-P도 증가(增加) 시키나 Fe-P는 감소(減少)시키는데 그 정도(程度)는 토양(土壞)에 따라 다르다. 8. 수도묘(水稻苗)의 건물중(乾物重)에 대(對)한 인산효과(燐酸?果)는 현저(顯著)하며 석회(石灰)를 시용(施用)하지 않을때는 인산(燐酸) 흡수계수(吸收係數)의 6.8%, 석회(石灰)를 시용(施用)할 때는 인산(燐酸) 흡수계수(吸收係數)의 10.0% 해당량(該當量)에서 가장 많은 건물중(乾物重)을 생산(生産)하였다. 9. 석회(石灰) 시용(施用)은 수도묘중(水稻苗中)의 석회(石灰) 및 규산(珪酸)의 함량(含量)과 그 흡수량(吸收量)을 증가(增加)시키나 철(鐵) 및 알루미늄함량(含量)과 그 흡수량(吸收量)을 감소(減少)시킨다. 묘중(苗中)의 인산함량(燐酸含量)이나 흡수량(吸收量)은 인산시용(燐酸施用)으로 증가(增加)되나 철함량(鐵含量)은 감소(減少)되며, 철(鐵)이나 알루미늄의 시용(施用)은 이들의 함량(含量)과 흡수량(吸收量)을 증가(增加)시키나 인산함량(燐酸含量)과 흡수량(吸收量)은 감소(減少)시킨다. 10. 석회(石灰)의 시용(施用)은 과잉(過剩)의 철(鐵)과 알루미늄에 의(依)한 피해(被害)를 크게 경감(輕滅)시킨다. 11. 인산(燐酸) 시용시(施用時) 묘(苗)의 건물중(乾物重)은 묘중(苗中)의 인산(燐酸), 석회(石灰) 및 규산(珪酸)의 흡수량(吸收量)과 고도(高度)의 유의성(有意性)있는 정상관관계(正相關關係)가 있었고 철(鐵) 및 알루미늄 시용시(施用時) 건물중(乾物重)은 석회(石灰), 규산(珪酸)의 함량(含量) 및 그 흡수량(吸收量)과는 유의성(有意性) 있는 정상관(正相關), 철(鐵) 및 알루미늄의 함량(含量)과 이들의 흡수량(吸收量)과는 유의성(有意性)있는 부상관(負相關) 관계(關係)가 있었다. 12. 석회(石灰)와 인산(燐酸)을 시용(施用)하였을 때 묘(苗)의 건물중(乾物重)은 시험(試驗) 후(後) 토양(土壤)의 pH 및 Morgan 용액(溶液) 가용(可溶) 석회(石灰) 함량(含量)과 고도(高度)의 유의성(有意性)있는 정상관(正相關) 관계(關係)가 있었고 석회(石灰)와 철(鐵) 및 알루미늄을 시용(施用)한 시험(試驗) 후(後) 토양(土壤)의 pH와 석회(石灰) 및 규산함량(珪酸含量)과도 유의성(有意性)있는 정상관(正相關), 철(鐵) 및 알루미늄의 함량(含量)과는 부(負)의 상관관계(相關關係)가 있었다.

• 광물과 암석
• /
• 제33권2호
• /
• pp.99-114
• /
• 2020

거창지역의 쥬라기 화강암에서 발달하는 결과 평행한 압열인장강도(σ_t)의 특성을 분석하였다. 여섯 방향의 결에 대한 평가는 미세균열의 길이와 위의 강도에 대한 파라미터의 값을 이용하여 수행하였다. 각 방향에 속하는 다섯 시험편의 강도값은 다섯 그룹으로 분류하였다. 이들 다섯 그룹의 강도값은 그룹 A < B < C < D < E의 순으로 증가한다. 위의 미세균열과 강도 사이의 밀접한 상관성을 도출하였다. 이 연구의 분석 결과는 다음과 같다. 첫째, 3개 결 사이의 강도의 변화 및 특성을 보여 주는 도면을 작성하였다. 위의 도면에서는, 각 그룹에 속하는 여섯 방향의 강도값을 1번 결(리프트 1 및 리프트 2), 2번 결(그레인 1 및 그레인 2) 그리고 3번 결(하드웨이 1 및 하드웨이 2)의 순으로 배열하였다. 다섯 그룹의 강도분포선은 R1의 방향에 집중한다. 그래서 강도차(Δσ_t)를 지시하는 위의 다섯 선 사이의 폭은 R1 방향에서 가장 협소하다. 관련 도면으로부터, 각 결을 형성하는 두 방향 사이의 변화 특성을 도출하였다. 그레인 2(2)-시험편은 그레인 1(1)-시험편에 비하여 보다 높은 강도값 그리고 보다 낮은 강도차값을 보여 준다. 이러한 현상은 시험편 H2(2)와 H1(1) 사이의 사례와 부합한다. 위의 시험편 (2)의 강도 특성은 시험편 (1)에 비하여 보다 낮은 미세균열의 밀도 그리고 하중 방향에 평행 배열하는 미세균열의 분포에 있어서의 보다 높은 균일도를 시사한다. 위의 도면에서는 각 그룹에 속하는 여섯 강도값이 증가하는 순으로 배열하였다. 그룹 D 및 E 양쪽에 속하는 시험편의 강도값은 R1 < R2 < G1 < H1 < G2 < H2의 순으로 나타난다. 따라서, 그룹 D 및 E의 강도값은 여섯 방향의 결의 평가를 위한 지시자값이 될 수 있다. 둘째, 경사각(θ)과 강도차 사이의 상관도를 작성하였다. 위의 두 파라미터의 값은 두 방향 사이를 연결하는 다섯 강도분포선을 통하여 획득하였다. 일번 면(그레인 1-하드웨이 1, R'), 2번 면(리프트 1-하드웨이 2, G') 및 3번 면(리프트 2-그레인 2, H')과 관련된 도면으로부터, 일차함수의 기울기값은 R'(0.391) < G'(0.470) < H'(0.485)의 순으로 증가한다. 3개 면 중에서, 3번 면과 관련된 도면은 다섯 그룹 사이의 가장 높은 분포밀도를 보여 준다. 1번 결(리프트 1-리프트 2, R), 2번 결(그레인 1-그레인 2, G) 및 3번 결(하드웨이 1-하드웨이 2, H)과 관련된 도면으로부터, 일차함수의 기울기값은 R(0.407) < H(0.453) < G(0.460)의 순으로 증가한다. 3개 결 중에서, 일번 결과 관련된 도면은 하부 구간에 속하는 그룹의 가장 높은 빈도수를 보여 준다. 종합하면, 3개 면 · 3개 결 사이의 경사각의 분포 폭은 H' < G < R' < R < G' < H의 순으로 증가한다. 섯째, 미세균열의 길이와 관련된 파라미터 그리고 인장강도 사이의 상관성 분석을 수행하였다. 이들 파라미터는 빈도수(N), 총 길이(Lt), 평균 길이(Lm), 중앙 길이(Lmed) 및 밀도(ρ)를 포함할 수 있다. 위의 미세균열에 대한 개개 파라미터(X) 그리고 다섯 그룹에 해당하는 다섯 수준의 인장강도(Y) 사이의 상관도를 작성하였다. 다섯 종류의 상관도로부터, 상관계수의 값(R²)은 다섯 수준의 강도와 함께 증가한다. 각 도면으로부터 도출한 다섯 상관계수의 평균값은 0.22(N) < 0.34(Lt) < 0.38(ρ) < 0.57(Lmed) < 0.58(Lm)의 순으로 증가한다. 넷째, 그룹 E에 해당하는 최대강도(X) 그리고 위의 다섯 파라미터(Y) 사이의 상관도를 작성하였다. 관련 도면으로부터, 상관계수의 값은 0.61(N) < 0.81(Lt) < 0.87(ρ) < 0.93(Lm) < 0.96(Lmed)의 순으로 증가한다. 가장 높은 상관성을 갖는 두 파라미터는 최대 강도와 함께 중앙 길이이다. 미세균열과 강도 사이의 상기 상관성 분석을 통하여, 이 연구에서 도출한 결과물에 대한 신뢰성을 제고할 수 있다.

• Applied Biological Chemistry
• /
• 제9권
• /
• pp.125-147
• /
• 1968

I. 수도(水稻)에 대(對)한 질소(窒素)의 합리적시용법(合理的施用法)을 확립(確立)하기 위(爲)한 일환(一環)의 연구(硏究)로서 못자리의 질소시용량(窒素施用量)과 못자리 말기(末期)에 있어서의 요소엽면살포(尿素葉面撒布)가 묘(苗)의 소질(素質) 특(特)히 질소(窒素)의 흡수(吸收) 및 발근력(發根力)에 미치는 영향을 알고자 시험(試驗)한바 그 결과(結果)는 다음과 같다. 1. 못자리에 $3.3\;m^2$ 당(當) 요소(尿素) 45g 토양시비(土壤施肥)한 것은 질소함량(窒素含量)이 1.835%인데 65g 시비구(施肥區)는 2.191%로서 유의차(有意差)를 인정(認定)하였다. 2. 못자리 말기(末期)의 요소엽면살포구(尿素葉面撒布區))$(T_{1},\;T_2)$는 무처리구(無處理區)$(T_0)$에 비(比해)서 모두 질소함량(窒素含量)이 증대(增大)되고 있으며 처리간(處理間)에 유의차(有意差)를 인정(認定)하였다. 즉 무처리구(無處理區)$(T_0)$는 질소함량(窒素含量)이 1.958%인데 0.5% 요소액살포구(尿素液撒布區)$(T_1)$는 2.020%이며 1.0% 요소액살포구(尿素液撒布區)$(T_2)$는 2.063%였다. 3. 요소농도(尿素濃度)가 낮은 $T_1$ 구(區)에 대해서 10% 요소액(尿素液)과 동량(同量) 요소(尿素)를 토양(土壤)에 시비(施肥)한 구(區)$(T_2)$는 질소(窒素)의 함량(含量)이 2.011%로서 오히려 낮으며 엽면살포(葉面撒布)가 모의 질소함량(窒素含量)을 증대(增大)시켰으며 이앙후(移秧後)의 착근(着根)과 초기(初期) 생육(生育)을 촉진(促進)시켰다. 4. 못자리에 $3.3\;m^2$ 당(當) 요소(尿素) 45g 토양시비구(土壤施肥區)$(N_1)$는 탄소함량(炭素含量)이 22.57%인데 65g 시비구(施肥區)$(N_2)$는 23.10%로서 유의차(有意差)가 인정(認定)되며 질소사용량(窒素使用量)이 더 많을 경우에 탄소함량(炭素含量)도 높았다. 5. 요소엽면살포(尿素葉面撒布) 및 토양시비구(土壤施肥區)의 탄소함량(炭素含量)은 $T_1$ 구(區)22.86% $T_2$ 구(區) 23.10% $T'_2$ 구(區) 22.95%로서 $T_0$구(區) 22.43%에 비(比)하여 높았으며 질소흡수(窒素吸收)가 커지는데 비례(比例)해서 증대(增大)되고 있다. 6. C/N율(率)에 있어서는 토양시비구간(土壤施肥區間)과 못자리 말기(末期)의 요소엽면살포구간(尿素葉面撒布區間) 모두 유의차(有意差)가 인정(認定)되며 질소시용량(窒素施用量)이 많은 경우에 C/N율(率)이 낮았다. 7. 발근수(發根數)는 $N_1$ 구(區)보다 $N_2$ 구(區)가 조사기간중(調査期間中)$1{\sim}2$개(個)가 많았으며 못자리말기(末期)에 질소시용(窒素施用)도 역시 발근수(發根數)를 증대(增大)시켰다. 8. 근장(根長)에 있어서도 처리간변이(處理間變異)가 발근수(發根數) 경우와 동일(同一)한 경향(傾向)이였다. 9. 모의 질소(窒素) 및 소소함량(素素含量)이 높고 C/N율(率)이 낮은 것이 발근수(發根數) 및 근장(根長)을 증대(增大)시켰다. II. 수전기에 있어서의 전엽(剪葉)의 정도(程度)와 요소엽면살포(尿素葉面撒布)가 수도(水稻)의 등숙(登熟) 및 수량(數量)에 미치는 영향을 알고자 하였으며 식물체(植物體)의 질소(窒素) 및 탄소함량(炭素含量)을 분석(分析)하여 이들과 수량(數量)의 관계(關係)를 살펴 보았던바 결과(結果)는 다음과 같다. 1. 1수평균중(穗平均重)은 전엽(剪葉)의 정도(程度)가 클수록 저하(低下)하였으며 요소(尿素)의 엽면살포(葉面撒布)는1수평균중(穗平均重)을 증가(增加)하는데 도움이 되었고 1회살포구(回撒布區)(B)보다 2회살포구(回撒布區) (A)가 더 유효(有效)하였다. 2. 벼의 등숙율(登熟率)은 전엽처리간(剪葉處理間)에 고도(高度)의 유의차(有意差)를 인정(認定)하였으며 전엽(剪葉)의 정도(程度)가 클 수록 등숙율(登熟率)이 낮았다. 한편 질소(窒素)의 엽면살포(葉面撒布)가 등숙율(登熟率)에 미치는 영향(影響)은 보통(普通)의 유의성(有意性)을 보일 정도로 유효(有效)하였다. 전엽(剪葉)의 정도(程度)와 등숙율(登熟率)과의 상관관계(相關關係)를 계산(計算)하여 본즉 상관계수(相關係數)(r)는 0.961로서 고도의 상관(相關)을 보이고 존치엽수(存置葉數)가 많을수록 등숙율(登熟率)은 높았다. 3. 정조천립중(正租千粒重)에 미치는 전엽(剪葉)의 영향(影響)은 무전엽구(無剪葉區) (f)의 정조천립중(正租千粒重) 28.05g을 100으로 하였을 때 1매존치구(枚存置區) (a) 84.88, 2 매존치구(枚存置區) (b) 31.51, 3 매존치구(枚存置區) (c) 95.08, 4 매존치구(枚存置區) (d) 97.29, 5 매존치구(枚存置區) (e) 100.40dml 수치(數値)를 보였으며 이들간의 상관계수(相關係數)(r)는 0.925로서 고도(高度)의 상관(相關)을 보여 존치엽수(存置葉數)가 많을수록 높았다. 한편 요소엽면살포(尿素葉面撒布)가 정조천립중(正租千粒重)에 미치는 효과는 무살포구(無撒布區) (c) 정조천립중(正租千粒重) 25.89g을 100으로 하면 B 구(區) 103.20이고, A 구(區)는 105.56의 지수(指數)를 보였으며 처리간(處理間)에 고도(高度)의 유의성(有意性)을 보이고 있다. 4. 정조중(正租重)에 미치는 전엽(剪葉)의 영향(影響)은 전엽(剪葉)의 정도(程度)가 클 수록 정조중(正租重)은 저하(低下)하였으며, f 구(區)의 정조중(正租重) 172.7g을 100으로 하였을 때 a 구(區) 64.10, b 구(區) 71.63, c 구(區) 78.23, d 구(區) 82.22, e 구(區) 99.89의 지수(指數)를 보였고 전엽(剪葉)의 정도(程度)와 정조중(正租重)과의 상관계수(相關係數)(r)는 0.971로서 고도(高度)의 상관(相關)을 보이고 있다. 한편 요소(尿素)의 엽면살포(葉面撒布)의 효과(效果)는 통계적(統計的)으로 보아 유의차(有意差)가 인정(認定)되며 c 구(區) 133.0g을 100으로 하였을때 B 구(區) 104.88이고 A 구(區)는 117.22의 지수를 보였다. 5. 현미수량은 f 구(區) 145.94g을 100으로 하였을때 a 구(區) 33.41 b 구(區) 42.29, c 구(區) 64.85 d 구(區) 70.20 그리고 e 구(區)는 92.25의 지수(指數)를 보여 처리간(處理間)에 고도(高度)의 유의차(有意差)를 보였으며 제현율(製玄率)은 f 구(區) 84.50% a 구(區) 44.04%, b 구(區) 49.89%, c 구(區) 70.05% d 구(區) 72.15% e 구(區)는 77.87%였다. 한편 요소(尿素)의 엽면살포구(葉面撒布區)의 현미수량(玄米數量)은 C 구(區)의 수량 88.47g을 100으로 하였을 때 B 구(區) 109.85, A 구(區)는 124.98의 지수(指數)를 보였다. 6. 제현율(製玄率)은 C 구(區) 66.51%이고, B 구(區) 69.77% A 구(區) 70.93%을 보였다. 7. 질소함량(窒素含量)은 요소엽면살포(尿素葉面撒布)에 의하여 이삭이나 잎에 있어서 모두 증대(增大)하여 무살포구(無撒布區) (C) 1.341% 및 1.479%인데 요소엽면살포구(尿素葉面撒布區) (B)는 1.369% 및 1.491%의 분석치(分析値)를 보였다. 8. 탄소함량(炭素含量)은 질소(窒素)의 경우와 같이 요소엽면살포(尿素葉面撒布)에 의하여 모두 증대(增大) 되었으며, 무살포구(無撒布區) (C)의 이삭 37.000% 및 43.915%의 분석치(分析値)를 보였다. 9. C/N율(率)은 이삭에 있어서는 처리간(處理間)에 차이(差異)가 없었고 잎에서만 요소엽면살포구(尿素葉面撒布區)가 약간 높았다. 10. 현미수량(玄米數量)과 질소(窒素), 탄소함량(炭素含量) 및 C/N율간(率間)에는 고도(高度)의 상관(相關)을 보였으며 질소(窒素) 및 탄소함량(炭素含量) 그리고 C/N율(率)이 높을 수록 수량(數量)을 증대(增大)하였다. III. 수비(穗肥)로써 요소엽면살포(尿素葉面撒布)의 효과(效果) 및 그 시기(時期)를 알고자 시험(試驗)한바 그 결과(結果)는 다음과 같다. 1. 간장(稈長), 수장(穗長 ) 및 수수(穗數에)는 차이(差異)를 인정(認定)하지 못하였다. 2. 1수평균(穗平均) 영화수(潁花數)는 수비시용시기간(穗肥施用時期間)에 보통(普通)의 유의성(有意性)을 보였고 수비시용시기(穗肥施用時期)가 빠를 수록 증대(增大)하는 경향(傾向)을 보였으며 수비시용방법간(穗肥施用方法間)에서는 유의성(有意性) 차이(差異)가 인정(認定)되지 않았으나 수치적(數値的)으로는 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區)가 가장 많아서 65.9 입(粒), 요소(尿素) 10%액(液) 토양시용구(土壤施用區) 65.6 입(粒), 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 64.4 입(粒), 대조구(對照區) 63.9 입(粒)의 순위로 적었다. 3. 등숙율(登熟率)은 수비시용기간(穗肥施用期間)에는 보통(普通)의 유의차(有意差)를 보였고 수비시용기(穗肥施用期)가 출수기(出穗期) 7일(日)까지에서는 늦을수록 약간 높아지는 경향(傾向)을 보였으며 수비시용방법(穗肥施用方法)에 있어서는 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區)와 10%액(液) 토양시용구(土壤施用區)가 현저(顯著)히 높아서 89.8% 및 89.4%를 보였고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區)는 87.8% 및 87.5%를 보여 이들 처리간(處理間)에 고도(高度)의 유의성(有意性)을 보였다. 4. 정조천립중(正租千粒重)은 수비시용시기간(穗肥施用時期間)에 고도(高度)의 유의차(有意差)가 인정(認定)되며 등숙율(登熟率)의 경우와 같이 출수전(出穗前) 7일(日)까지에서는 수비(穗肥)가 늦을 수록 천립중(千粒重)은 증대(增大)하는 경향(傾向)을 보였으며 수비시용방법간(穗肥施用方法間)에 있어서도 고도(高度)의 유의차(有意差)가 인정(認定)되었고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區)는 23.18g로서 가장 높았다. 5. $3.3\;m^2$당 정조수량(正租收量)은 수비시용시기간(穗肥施用時期間)에는 유의차(有意差)가 인정(認定)되지 않았으며 수비시용방법(穗肥施用方法)에 따르는 차이(差異)는 고도(高度)의 유의차(有意差)를 보여 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區) 및 요소(尿素) 10%액(液) 토양시용구(土壤施用區)가 현저(顯著)히 높아 1.486kg 및 1.491kg을 냈고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 및 대조구(對照區)는 1.381kg 및 1.486kg이었다. 6. 제현율(製玄率)은 수비시용시기간(穗肥施用時期間)에는 유의차(有意差)를 인정(認定)하였으며 수비시기(穗肥時期)가 출수전(出穗前) 14일(日)이 되던 때가 가장 높았으며 수비방법(穗肥方法)에 따르는 제현율(製玄率)은 처리간(處理間)에 고도(高度)의 유의차(有意差)를 인정(認定)할 수 있었고 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區) 및 10%액 토양시용구(土壤施用區)는 84.72% 및 84.06%로서 현저(顯著)히 높고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 및 대조구(對照區)는 83.29% 및 82.56을 보였다. 7. $3.3\;m^2$당 현미수량(玄米收量)은 수비시간(穗肥時間)에 유의차(有意差)를 인정(認定)하였고 수기비(穗期肥)가 빠른 출수기전(出穗期前) 21일(日)에 시용(施用)한 것이 1.192kg로서 가장 많았으며 수비시용방법간(穗肥施用方法間)에 있어서는 통계적(統計的)으로 고도(高度)의 유의차(有意差)를 보이고 있으며 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區) 및 10%액(液) 토양시용구(土壤施用區)는 1.259kg 및 1.254kg으로써 현저(顯著)히 높고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 및 대조구(對照區)는 각각(各各) 1.149kg 및 1.095kg로써 낮았다. 8. 수비(穗肥)로서 요소(尿素)를 시용(施用)한 경우 식물체내(植物體內) (窒素含量)은 증대(增大)되었는데 요소엽면살포(尿素葉面撒布)가 토양시용(土壤施用)보다 효과적(效果的)이였으며 식물체내(植物體內) 요소함량(尿素含量)의 증대(增大)와 더불어 대체로 탄소함량(炭素含量)도 증대(增大)되는 경향(傾向)을 보였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국유통학회지:유통연구
• /
• 제15권2호
• /
• pp.1-34
• /
• 2010

소비자의 구매 행위가 합리적이고 실용적인 방향으로 변화하는데 힘입어 할인점업계는 급속한 외형적인 성장과 함께 경쟁도 치열하다. 따라서 업계는 그 해결책으로 차별화와 수익성을 동시에 실현 시킬 수 있는 유통업체 브랜드(PB: Private Brand) 개발에 사활을 걸고 있다. 또한 치열한 경쟁 환경 하에서 생존하기 위해서는 고객만족을 넘어서 고객충성도를 높이는 것이 효과적인 방법임이 밝혀짐에 따라 PB가 고객충성도를 제고시키기 위한 전략적인 도구로 사용되고 있다. PB 이용 고객의 충성도를 높이려면 우선 고객집단의 특성을 파악해서 소비자가 지각하는 품질수준을 우선적으로 맞춰줘야 고객만족과 고객신뢰를 얻을 수 있고 결과적으로 고객충성도로 유도할 수 있다. 이에 본 연구는 지각된 품질에 영향을 미치는 선행요인과 고객충성도에 영향을 미치는 변수들 간의 관계에 대한 체계적인 분석결과를 제시하기 위해 선행연구에서 검증된 인과관계를 기반으로 연구모형과 연구가설을 설정했고, 주요 연구결과는 다음과 같다. 기업명성, 브랜드명성, 제품경험, 브랜드친숙도가 높을수록 지각된 품질이 높아지고, 지각된 품질이 높을수록 고객만족, 고객신뢰, 고객충성도가 높아지며, 고객만족과 고객신뢰가 높을수록 고객충성도가 높아지는 것으로 조사되었다. 또한 기업명성이 지각된 품질에 미치는 영향력은 PB가 NB보다 높게 나타난 반면 브랜드명성과 브랜드친숙도가 지각된 품질에 미치는 영향력은 NB가 PB보다 높게 나타났다. 이러한 실증분석 결과는 지각된 품질에 영향을 미치는 선행요인과 결과요인에 대한 보다 명확한 이해를 바탕으로 실무자가 마케팅 활동을 하는데 유용하게 활용할 수 있을 것이다.

• 한국산림과학회지
• /
• 제70권1호
• /
• pp.7-16
• /
• 1985

임목(林木)의 주체성인(主體成因)인 수간(樹幹)에 대한 각종(各種) 성장인자간(成長因子間)의 정준상관(正準相關)과 그의 관계적(關係的) 배경(背景) 및 수간(樹幹)의 총합적(總合的)인 변동분석(變動分析)에 의(依)한 수간적(樹幹的) 특징(特徵)을 파악(把握)함에 있어, 그의 최적기법(最適技法)을 탐색(探索)하기 위한 시도(試圖)로서 일본(日本)잎갈나무(Larix leptolepis)에 주성분(主成分) 및 정준상관분석법(正準相關分析法)을 도입적용(導入適用)하고, 얻어진 결과(結果)를 다음과 같이 요약(要約)한다. 1) 정형수(正形數)($x_8$)를 제외(除外)한 모든 성장인자(成長因子) 즉(卽), 수고(樹高)($x_1$), 지하고(枝下高)($x_2$), 망고(望高)($x_3$), 흉고직경(胸高直徑)($x_4$), 중앙직경(中央直徑)($x_5$), 수관폭(樹冠幅)($x_6$) 및 간재적(幹材積)($x_7$) 등(等)의 각(各) 인자간(因子間)에 강약간(強弱間)의 상관(相關)이 있으며, 특(特)히 흉고직경(胸高直徑), 수고(樹高) 및 중앙직경(中央直徑) 등(等)은 간재적(幹材積)과 고도(高度)의 상관(相關)이 있다(표(表) l 참조(參照)). 2) (1) 상장성장인자(上長成長因子)인 수고(樹高), 지하고(枝下高) 및 망고(望高) 등(等)의 합성변량(合成變量)과 간재적간(幹材積間), (2) 비대성장인자(肥大成長因子)인 흉고직경(胸高直徑), 중앙직경(中央直徑) 및 수관폭(樹冠幅) 등(等)의 합성변량(合成變量)과 간재적간(幹材積間), (3) 상장(上長) 및 비대성장인자(肥大成長因子)를 총망라(總網羅)한 6개인자(個因子)의 합성변량(合成變量)과 간재적간(幹材積間)의 정준상관계수(正準相關係數)와 정준변량(正準變量)이 각각(各各) $${(1)\;{\gamma}_{u1,v1}=0.82980^{**},\;\{u_1=1.00000x_7\\v_1=1.08323x_1-0.04299x_2-0.07080x_3}\\{(2)\;{\gamma}_{u1,v1}=0.98198^{**},\;\{u_1=1.00000x_7\\v_1=0.86433x_4+0.11996x_5+0.02917x_6}\\{(3)\;{\gamma}_{u1,v1}=0.98700^{**},\;\{u_1=1.00000x_7\\v1=0.12948x_1+0.00291x_2+0.03076x_3+0.76707x_4+0.09107x_5+0.02576x_6}$$ 등(等)과 같이 되어, 어느 경우(境遇)에서도 고도(高度)의 정준상관(正準相關)을 가지며, (1)의 경우(境遇)에는 수고(樹高)가, (2)의 경우(境遇)에는 흉고직경(胸高直徑)이, (3)의 경우(境遇)에는 흉고직경(胸高直徑)과 수고(樹高)가 각각(各各)의 정준상관(正準相關)에 절대적인 기여(寄與)를 하는 것으로서, 각종(各種) 질적성장(質的成長)의 총합특성(總合特性)은 이들 인자(因子)의 막강한 영향력(影響力)에 의해서 형성(形成)되며, 특(特)히 (3)의 경우에서 간재적(幹材積)과의 정준상관(正準相關)에 미치는 흉고직경(胸高直徑)의 영향력(影響力)은 기타(其他)의 인자(因子)에 비(比)하여 판이(判異)하게 큰 것으로 밝혀지고 있다(표(表) 2 참조(參照)). 3) 상장성장인자(上長成長因子)인 수고(樹高), 지하고(枝下高) 및 망고(望高) 등(等)의 합성변량(合成變量)과 비대성장인자(肥大成長因子)인 흉고직경(胸高直徑), 중앙직경(中央直徑) 및 수관폭(樹冠幅) 등(等)의 합성변량간(合成變量間)의 정준상관계수(正準相關係數)와 정준변량(正準變量)이 $${\gamma}_{u1,v1}=0.78556^{**},\;\{u_1=1.20569x_1-0.04444x_2-0.21696x_3\\v_1=1.09571x_4-0.14076z_5+0.05285z_6$$와 같이 됨에 따라, 각종 상장성장인자(上長成長因子)와 비대성장인자간(肥大成長因子間)의 고도(高度)의 정준상관(正準相關)에 있어 수고(樹高)와 흉고직경(胸高直徑)만의 기여도(寄與度)가 극(極)히 현저한 것으로서, 상장성장(上長成長)의 총합특성(總合特性)은 수고(樹高)에 의해서, 비대성장(肥大成長)의 총합특성(總合特性)은 흉고직경(胸高直徑)에 의해서 각각(各各) 형성(形成)된다는 사실(事實)이 확인(確認)된 것이다. 따라서 양인자(兩因子)에 대한 간재적계측(幹材積計測)에 있어서의 필수유력인(必須有力因子)로서의 과학성(科學性)이 입증(立證)된 것이라 생각한다(표(表) 2 참조(參照)). 4) 수간(樹幹)의 8개성장인자(個成長因子) 즉(卽), 8차원(次元)의 정보(情報)(특성치(特性値))를 설정(設定)된 유효목표(有效目標) 85%에 따라 3차원(次元)으로 간략화(簡約化)된 총합특성치(總合特性値) 즉(卽), 제(第) 1 ~ 제(第) 3 주성분(主成分)은 다음과 같다. 제(第) 1 주성분(主成分)($Z_1$); $Z_1=0.40192x_1+0.23693x_2+0.37047x_3+0.41745x_4+0.41629x_5+0.33454x_60.42798x_7+0.04923x_8$ 제(第) 2 주성분(主成分)($Z_2$) ; $z_2=-0.09306x_1-0.34707x_2+0.08372x_3-0.03239x_4+0.11152x_5+0.00012x_6+0.02407x_7+0.92185x_8$ 제(第) 3 주성분(主成分)($Z_3$) ; $Z_3=0.19832x_1+0.68210x_2+0.35824x_3-0.22522x_4-0.20876x_5-0.42373x_6-0.15055x_7+0.26562x_8$ 제(第) 1 주성분(主成分)($Z_1$)은 기여율(寄與率)이 63.26%나 되는 매우 높은 정보흡수력(情報吸收力)을 가진 "크기의 인자(因子)(size factor)"로서, 그의 주성분득점(主成分得點)(principal component score)은 인자부하량(因子負荷量)이 매우 높은 간재적(幹材積), 흉고직경(胸高直徑), 중앙직경(中央直徑) 및 수고(樹高) 등(等)에 의해써 결정(決定)되며, 제(第) 2 주성분(主成分)($Z_2$)은 입체적(立體的) 형상(形狀)의 지표(指標) 즉(卽), 수간(樹幹)의 입체적(立體的) 상사성(相似性)과 완구도(完溝度)를 나타내주는 "형상(形狀)의 인자(因子)(shape factor)"로서, 그의 score는 정형수(正形數)의 절대적(絶對的)인 영향력(影響力)에 의(依)해서 형성(形成)되며, 제(第) 3 주성분(主成分)($Z_3$)은 상장성장(上長成長)과 비대성장(肥大成長)과의 역관계(逆關係)의 현상(現象) 즉(卽), 수간(樹幹)의 세장(細長)(또는 굵고 짧음)의 정도를 표시(表示)하는 성장형상(成長形狀)의 지표(指標)로서, 이는 제(第) 2의 "형상(形狀)의 인자(因子)"가 된다. 이상(以上) 3개주성분(個主成分)은 그의 누적기여율(累積寄與率)이 88.36%로서 만족스러운 정보흡수역량(情報吸收力量)을 지니고 있다(표(表) 3 참조(參照)). 5) 본(本) 연구(硏究)에 적용(適用)된 주성분(主成分) 및 정준(正準) 상관분석법(相關分析法)은 적극적(積極的)인 이용개발(利用開發)에 따라서는 삼림계측(森林計測)(임목성장(林木成長)), 지위판정분류(地位判定分類), 삼림(森林) 및 임산업(林産業)의 경영진단(經營診斷), 임산가공(林産加工)(품(品))의 생산관리(生産管理) 및 기지(其地) 총합특성치(總合特性値)의 산정(算定)을 필요(必要)로 하는 분야(分野)에 많은 기여(寄與)가 있을 것으로 사료(思料)된다.