• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.93-99
• /
• 2017

Dose enhancement effects at megavoltage (MV) X and ${\gamma}-ray$ energies, and the effects of different energy levels on incident energy, dose enhancement agents, and concentrations were analyzed using Monte Carlo simulations. Gold, gadolinium, Iodine, and iron oxide ($Fe_2O_3$) were compared as dose enhancement agents. For incident energy, 4, 6, 10 and 15 MV X-ray spectra produced by a linear accelerator and a Co-60 ${\gamma}-ray$ were used. The dose enhancement factor (DEF) was calculated using an ICRU Slab phantom for concentrations of 7, 18, and 30 mg/g. The DEF was higher at higher concentrations of dose enhancement agents and at lower incident energies. The calculated DEF ranged from 1.035 to 1.079, and dose enhancement effects were highest for iron oxide, followed by iodine, gadolinium, and gold. Thus, this study contributes to improving the therapeutic ratio by delivering larger doses of radiation to tumor volume, and provides data to support further in vivo and in vitro studies.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.33-44
• /
• 2023

Wind power is one of the most efficient and reliable energy sources in the transition to a low-carbon society. In particular, offshore wind power provides a high-quality and stable wind resource compared to onshore wind power while both present a higher installed capacity than other renewables. In this paper, we present our new program, the X-WIND program well suitable for the assessment of the substructure of offshore wind turbines. We have developed this program to increase the usability of analysis programs for offshore wind energy substructures by addressing the shortcomings of existing programs. Unlike the existing programs which cannot solely perform the substructure analyses or lack pre-post processors, our X-WIND program can complete the assessment analysis for the offshore wind turbines alone. The X-WIND program is embedded in AutoCAD so that both design and analysis are performed on a single platform. This also performs static and dynamic analysis for wind, wave, and current loads, essential for offshore wind power structures, and includes pre/post processors for designs, mesh developments, graph plotting, and code checking. With this expertise, our program enhances the usability of analysis programs for offshore wind energy substructures, promoting convenience and efficiency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.2
• /
• pp.111-116
• /
• 2003

In this paper, a CMOS baseband analog receiver for wireless home network is discussed. It is composed of a Gilbert type mixer, an Elliptic 6th order 1ow pass filter, and a 6-bit A/D converter. The main role of the mixer is generating a mixed analog signal between the 200MHz output signal of CMOS RF stage and the 199MHz local oscillator. After the undesired high frequency component of the mixed signal comes out. Finally, the analog signal is converted into digital code at the 6-bit A/D converter, The proposed receiver is fabricated with 0.25${\mu}{\textrm}{m}$ 1-poly 5-metal CMOS technology, and the chip area is 200${\mu}{\textrm}{m}$ X1400${\mu}{\textrm}{m}$. the receiver consumes 130㎽ at 2.5V power supply.

• Journal of KIISE
• /
• v.44 no.9
• /
• pp.986-991
• /
• 2017

In this paper, we present a method for synthesizing imperative programs from input-output examples. Given (1) a set of input-output examples, (2) an incomplete program, and (3) variables and integer constants to be used, the synthesizer outputs a complete program that satisfies all of the given examples. The basic synthesis algorithm enumerates all possible candidate programs until the solution program is found (enumerative search). However, it is too slow for practical use due to the huge search space. To accelerate the search speed, our approach uses code optimization and avoids unnecessary search for the programs that are syntactically different but semantically equivalent. We have evaluated our synthesis algorithm on 20 introductory programming problems, and the results show that our method improves the speed of the basic algorithm by 10x on average.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.355-360
• /
• 2008

The complicated embedded system for multi-tasking requires RTOS(real-time operating system). It uses the optimal OS and processor to each embedded system on the heterogeneous development environment. This paper is proposed to use UML profile of OS API and Processor Configuration, instead of cross-compiling for developing the heterogeneous embedded system. This reduces the development time and cost through generating the automatic source code with the profile information of each embedded system. We generate and port the code after modeling the two heterogeneous real time operating systems (brickOS and uC/OS-II) and the processors (Hitachi H8 and Intel PXA255) with our proposed profile of the heterogeneous embedded system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.524-531
• /
• 1992

S/W의 구성은 기능을 실제로 수행하는 계산처리부와 사용자와 정보를 주고받는 User Interface부로 크게 나누어 볼 수 있다. 대부분의 S/W는 그 기능의 충실도와 아울러 편리한 사용법이 잘 어울려야 제역할을 할 수 있다. 따라서 편리한 User Interface를 만드는 일은 훌륭한 기능을 제공하는 것과 마찬가지로 S/W 개발자들이 지향해야 할 목표중 하나라 하겠다. 그러나 편리한 User Interface를 만드는 일은 전체 시스템개발 기간중 상당한 부분을 차지한다. 특히 CAD/CAM관련 S/W와 같이 사용자와 정보를 Graphic으로 주고받는 경우에는 User Interface의 구성이 더욱 더 어려워지며, 개발기간중 User Interace가 차지하는 비중은 더욱 커지게 된다. GUI는 최근들어 상당히 각광을 받고 있는 분야이며, 상당수의 GUI가 개발되어 있고, 이중 Unix용의 X-Window MS-DOS용의 MS-WINDOWS 3.0이 널리 사용되고 있다. 그러나 이러한 Window System들은 매우 다양한 기능을 제공하고 있음에도 불구하고, GUI자체의 덩치가 매우크고, S/W개발자가 익혀야하는 내용이 너무 복잡하여, 중/소형의 S/W개발에 사용하기에는 적합하지 않다. 본 연구에서는 GUI(Graphic User Interface)부분을 계산처리부와 완전분리하여, 범용성있는 개발용 Tool Kit을 구성함으로써 S/W개발자는 계산처리부만을 만들면되는 방안을 제시하고 있다. GS-GUI는 Menu처리부, Mouse/Keyboard입력처리부, Text/Graphic출력처리부로 나뉘어진다. Menu처리부는 Menu File로 주어지는 Menu Tree를 Pop-Up형태로 보여주며 User가 Menu를 선택할 수 있도록하며 선택된 Menu Item에 대한 Action Code를 계산처리부로 넘겨준다. 입력처리부에서는 Mouse와 Keyboard 어느것으로나 입력이 가능하도록 해준다. 출력처리부에서는 Action Code에 따라 계산처리부에서 계산된 결과를 화면에 보여주기 위한 각종 2D/3D Graphic Routine들이 포함되어있어 계산처리부에서 불러쓰도록 되어있다.

• Wind and Structures
• /
• v.25 no.1
• /
• pp.1-24
• /
• 2017

This paper presents a 1:25 multi-freedom aero-elastic model for a high lighting pole at the Zhoushan stadium. To validate the similarity characteristics of the model, a free vibration test was performed before the formal test. Beat phenomenon was found and eliminated by synthesis of vibration in the X and Y directions, and the damping ratio of the model was identified by the free decay method. The dynamic characteristics of the model were examined and compared with the real structure; the similarity results were favorable. From the test results, the major along-wind dynamic response was the first vibration component. The along-wind wind vibration coefficient was calculated by the China code and Eurocode. When the peak factor equaled 3.5, the coefficient calculated by the China code was close to the experimental result while Eurocode had a slight overestimation of the coefficient. The wind vibration coefficient during typhoon flow was analyzed, and a magnification factor was suggested in typhoon-prone areas. By analyzing the power spectrum of the dynamic cross-wind base shear force, it was found that a second-order vortex-excited resonance existed. The cross-wind response in the test was smaller than Eurocode estimation. The aerodynamic damping ratio was calculated by random decrement technique and the results showed that aerodynamic damping ratios were mostly positive at the design wind speed, which means that the wind-induced galloping phenomenon is predicted not to occur at design wind speeds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.390-399
• /
• 1988

A conventional BTC has the merit of real time processing and simple computation, but has the problem that its compression rate is low. In this paper, a modified BTC using the Quad Tree which is frequently used in binary image is proposed. The method results in the low compression rate by decreasing the total number of subblocks by mean of making the size of a subblock large in the small variation area of graty level and the size af a subblock small in the large variation area of gary level. For the effective transmission of bit plane, the Huffman run-lengh code for the large size of a subblock and the lookup table for tha small size of a subblock are used. The proposed BTC method show the result of coding 256 level image at the average data rate of about 0.8 bit/pixel.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.72.1-72.1
• /
• 2014

In this study, we extrapolate a nonlinear force-free field (NLFFF) from an observed photospheric magnetic field to understand the three-dimensional (3D) coronal magnetic field producing a huge solar flare. The purpose of this study is to develop a NLFFF extrapolation code based on the so-called MHD relaxation method and check how accurately our model reconstructs a coronal field. Furthermore, we apply it to the photospheric magnetic field obtained by Helioseismic and Magnetic Imager (HMI) on board Solar Dynamics Observatory (SDO) to reconstruct a 3D magnetic structure. We first investigate factors in controlling the accuracy of our NLFFF code by using a semi-analytical solution obtained by Low & Lou (1990). To extend a work done by Inoue et al. (2014), we apply various boundary conditions at the side and top boundaries in order to make our solution close to a realistic solution. As a consequence, our solution has a good accuracy when three components of a reference field are all fixed at the boundaries. Furthermore, it is also found that our solution is well matched to the Low & Lou solution in the central area of a simulation domain when the three components of a potential field are fixed at side and top boundaries (this approach is close to a realistic solution). Finally, we present the 3D coronal magnetic field producing an X 1.5-class flare in the active region 11166 through the extrapolation from SDO/HMI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.188-195
• /
• 2002

The M-algorithm for decoding convolutional codes can significantly reduce the complexity of the Viterbi algorithm by tracking a fixed number of survivor paths in each level of the decoding trellis. It is an easily-implementable algorithm suited for real-time processing of high-speed data. The algorithm, however, generates a sequence of catastrophic errors when the correct path is not included in the set of survivor paths. In this paper, the performance of the M-algorithm obtained from using various decoding complexity levels, frame lengths, and code constraint lengths is presented. The performance gain is quantified when the algorithm is used in conjunction with codes of increased constraint length. In particular, it is demonstrated the gain from the increased code free distance overcompensates the loss from the correct path being excluded from the survivors, when the frame length is short to moderate. Using 64 survivor paths, the signal-to-noise ratio gain obtained by increasing the constraint length from K=7 to K=9, 11, 15 is respectively 0.6, 0.75, and 08dB, when the frame of length L=100 has the frame error rate of 0.01%.