• Tunnel and Underground Space
• /
• v.30 no.5
• /
• pp.446-461
• /
• 2020

Numerical simulations of CIEMAT column test in Spain are performed to investigate the coupled thermo-hydro-mechanical (THM) behavior of MX80 bentonite pellets using TOUGH2-FLAC3D. The heater power and injection pressure of water in the numerical simulations are identical to those in the laboratory test. To investigate the applicability of the thermo-hydraulic (TH) model used in TOUGH2 code to prediction of the coupled TH behavior, the simulation results are compared with the observations of temperature and relative humidity with time. The tendencies of the coupled behavior observed in the test are well represented by the numerical models and the simulator in terms of temperature and relative humidity evolutions. Moreover, the performance of the models for the reproduction and prediction of the coupled TH behavior is globally satisfactory compared with the observations. However, the calculated stress change is relatively small and slow due to the limitations of the simple elastic and swelling pressure model used in numerical simulations. It seems that the two models are insufficient to realistically reproduce the complex coupled THM behavior in the bentonite pellets.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.280-287
• /
• 2003

To evaluate the practical application of oyster shells(OS) as construction materials, an experimental study was performed. More specifically, the long-term mechanical properties and durability of concrete blended with oyster shells were investigated. Test results indicate that long-term strength of concrete blended with 10% oyster shells is almost identical to that of normal concrete. However, the long-term strength of concrete blended with 20% oyster shells is appreciably lower than that of normal concrete. Thereby, concrete with higher oyster shell blend has the possibility of negatively influencing the concrete long-term strength. Elastic modulus of concrete blended with crushed oyster shells decreases as the blending mixture rate increases. Namely, the modulus is reduced to approximately 10∼15% when oyster shells are blended up to 20% as the fine aggregate. The drying shrinkage strain increases with an increasing crushed oyster shells substitution rate. In addition, the existing model code of drying shrinkage and creep do not coincide with the test results of this study. An adequate prediction equation needs to be developed. The utilization of oyster shells as the fine aggregate in concrete has an insignificant effect on fleering and thawing resistance, carbonation and chemical attack of concrete. However, water permeability is considerably improved.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.19-31
• /
• 2013

Since the high readable source codes help us to understand and modify the program, it is much easy to maintain them. The readability of source code is not only affected by the complexity of algorithms such as control structures but also affected by the coding styles such as naming and indentation. Although various coding standards have been presented for promoting the readability of source codes, it has been usually lost or ignored in a programming course. One of the reasons is that the coding standard is not a hard-and-false rule since it does not contribute to the performance of software. In this paper, we propose a simple automatic system, namely StyleJigsaw, which checks the style of the source codes written by C/C++ or Java. In this system, the coding style score is calculated and visualized as a jigsaw puzzle. To measure the educational effectiveness of StyleJigsaw, several experiments have been conducted on a class students in C++ programming course. According to the experimental results, the coding style score increased about 8.0 points(10.9%) on average using StyleJigsaw. Further, according to a questionnaire survey targeting the students who attended the programming course, about 88.5% of the students responded that StyleJigsaw was of help to learn the coding standards. We expect that the StyleJigsaw can be effectively used to encourage the students to obey the coding standards, resulting in high readable programs.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.400-408
• /
• 2018

Wide area augmentation system is a system that generates and transmits correction and Integrity information for use in wide area. Typical system is SBAS. In the United States, it operates under the name WAAS, EGNOS in Europe, MSAS in Japan, SDCM in Russia, GAGAN in India. it is developing Korean SBAS which named KASS by 2022 in Korea. SBAS is a standard System that is operated as civil aviation service base and set as international standards by ICAO. So the correction data can only is used for civil SPS receiver. In this paper, we discuss C1P1 DCB estimation which need to use SPS correction service for PPS receiver. Then we analyze C1P1 DCB correction effect under standalone Satellite Navigation and method to use PPS receiver under SPS DGPS. Finally we organize wide area augmentation system for PPS receiver and analysis performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.197-209
• /
• 2018

In this study, numerical analyses on Quad Tilt Rotor(QTR) are carried out to investigate the interference effect of components and effect of operating condition during forward flight. Actuator Surface Method(ASM) which is implemented in an open source CFD code, OpenFOAM, is used to calculate the flow field around QTR with high computational efficiency. The lift of the front and rear wing is found to increase or decrease depending on the rotation direction of the rotor. At the rear wing, the interference effects of the front and rear rotor appear as a combined manner. Performance change due to the phase difference is found to be insignificant. For both rotors, the locally higher thrust is generated by the blockage effect of the wing. The interference effect of wake from the front nacelle contributes to higher local thrust for the rear rotor compared to the front rotor. And it is observed that the amplitude of thrust oscillation can decrease depending on the phase difference between the rotors. Aerodynamic performances of both rotors and the entire aircraft were compared and analyzed for various operating conditions.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2005

Embedded systems have a set of tasks to execute. These tasks can be implemented either on application specific hardware or as software running on a specific processor. The design of an embedded system involves the selection of hardware software resources, Partition of tasks into hardware and software, and performance evaluation. An accurate estimation of execution time for extreme cases (best and worst case) is important for hardware/software codesign. A tighter estimation of the execution time bound nay allow the use of a slower processor to execute the code and may help lower the system cost. In this paper, we consider an ARM-based embedded system and developed a tool to estimate the tight boundary of execution time of a task with loop bounds and any additional program path information. The tool we developed is based on an exiting timing analysis tool named 'Cinderella' which currently supports i960 and m68k architectures. We add a module to handle ARM ELF object file, which extracts control flow and debugging information, and a module to handle ARM instruction set so that the new tool can support ARM processor. We validate the tool by comparing the estimated bound of execution time with the run-time execution time measured by ARMulator for a selected bechmark programs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.731-734
• /
• 2001

우편물을 집배원이 배달하는 순서로 자동구분 처리하기 위한 요소기술 줌에서 4-state 바코드 시스템이 개발되고 있으며 우편번호, 배달순서코드, 고객정보 등이 적용될 예정이다. 기존의 고객 바코드 판독 시스템은 우편물상의 바코드 심볼로지가 존재하는 판독대상 영역의 기울기가 ${\pm}4.47^{\circ}$ 이하이고, 심볼의 훼손과 잡영이 없을 경우에 $79{\sim}100msec(35,000{\sim}45,000$통/시간)의 속도로 자동 구분 정보가 판독된다. 본 논문에서는 판독범위 및 판독성능을 개선을 위하여 CCD(Charge Coupled Device) 센서로부터 획득된 이미지상에서 존재하는 심볼로지 정보의 고속판독 방법을 제시한 것이다. 이 판독방법은 그레이(gray) 이미지 바탕면의 경계값(threshold) 기울기 분포를 기준으로 2개의 경계값을 설정하여 판독대상 정보를 획득하였다. 또한, 4-state 바코드 심볼로지의 존재 가능성 영역만을 탐색하고, 판독대상 영역에서 트래커(tracker)를 탐색하여 심볼로지의 기울기값, 심볼로지 경계값, 심볼위치 좌표값을 생성한 후 심볼값이 판독한 것이다. 판독시험 결과는 판독대상 영역의 심볼로지가 ${\pm}45^{\circ}$ 기울어지고, 잡영이 존재할 경우에도 $30{\sim}60msec(58,000{\sim}l16,000$통/시간) 이내에 판독되었다. 우편물 자동구분용 바코드 판독기로써 적용될 경우에 판독속도가 평균 57.25% 이상 개선되고, 판독범위의 확장으로 0.2%의 기계적인 오류(이송과정예서의 Jam 발생 비율)를 제외할 경우에 거의 99.8% 우편물을 판독하여 자동구분 처리할 수 있게 될 것으로 기대된다.onebook 엑세스 모들(Server Phonebook Access Module)로 구성되어 있다.외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.69-76
• /
• 2018

The present study analyzed the effect of film hole position of 45 degree ribbed cooling channel on film cooling performance of gas turbine blades. We also investigated the influence of the ribs under the fixed blowing ratio. Three-dimensional numerical model was constructed and extensive simulation was conducted using the commercial code (Fluent ver. 17.0) under steady-state condition. Base on the simulation results, We investigated the cooling effectiveness, flow velocity, streamline, and pressure coefficient. Moreover, We analyzed the effect of cooling hole position on ejection of the secondary flow caused by the rib structure. From the results, It was found that internal flow of the cooling channel forms a vortex pair in the counterclockwise from the top side, and clockwise from the bottom side. For the channels with ribs, the vortex flow generated by the ribs caused a higher pressure difference near the hole outlet, resulting in at least 12% higher cooling effectiveness than the channel without ribs. Additionally, when the hole is located on the left side of the ribbed channel (Rib-Left), it can be found that the secondary flow generated by the ribs hits against wall surface near the hole to form a flow in the direction of the hole inclination angle. Therefore, It is considered that the region where the cooling gas discharged to the blade surface stays in the main flow boundary layer is wider than the other cases. In this case, The largest pressure coefficient difference was observed near the outlet of the hole, and as a result, the discharge of the cooling gas was accelerated and the cooling efficiency was slightly increased.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.18
• /
• pp.27-62
• /
• 2002

The international sale contract is the central contracts in export-import transactions. A good sale contract or set of general conditions of sale will cover all the principal elements of the transaction, so that uncertainties are avoided. The parties' respective duties as concern the payment mechanism, transport contract and insurance responsibilities, inter alia, will all be clearly detailed in the contract. The following key clauses should be included in international contracts of sale and general conditions of sale: ${\bullet}$ preamble ${\bullet}$ identification of parties ${\bullet}$ description of goods ${\bullet}$ price and payment conditions ${\bullet}$ delivery periods and conditions ${\bullet}$ inspection of the goods - obligations and limitations ${\bullet}$ quantity or quality variations in the products delivered ${\bullet}$ reservation of title and passing of property rights ${\bullet}$ transfer of risk - how accomplished ${\bullet}$ seller's warranties and buyer's complaints ${\bullet}$ assignment of rights ${\bullet}$ force majeure clause and hardship clause ${\bullet}$ requirement that amendments and modifications be in writing ${\bullet}$ choice of law ${\bullet}$ choice of dispute resolution mechanism Under most systems of law, a party can be excused from a failure to perform a contract obligation which is caused by the intervention of a totally unforeseeable event, such as the outbreak of war, or an act of God such as an earthquake or hurricane. Under the American commercial code (UCC) the standard for this relief is one of commercial impracticability. In contrast, many civil law jurisdictions apply the term force majeure to this problem. Under CISG, the standard is based on the concept of impediments to performance. Because of the differences between these standards, parties might be well advised to draft their own force majeure, hardship, or excusable delays clause. The ICC publication, "Force Majeure and Hardship" provides a sample force majeure clause which can be incorporated by reference, as well as a hardship clause which must be expressly integrated in the contract. In addition, the ICC Model provides a similar, somewhat more concise formulation of a force majeure clause. When the seller wishes to devise his own excusable delays clause, he will seek to anticipate in its provision such potential difficulties as those related to obtaining government authorisations, changes in customs duties or regulations, drastic fluctuations in labour, materials, energy, or transportation prices, etc.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.179-184
• /
• 2018

In this study, we compared the measured values of the effective beam size of standard gamma irradiator with the simulation results to provide a useful means to the effective beam area determination. Results of the simulation and measured using ion chamber was distributed in a relative error of 4.5 ~ 7.3% of the case of air kerma rate. The size of the effective beam area is when the simulation was implemented in the horizontal direction 27cm, 21.6cm vertical direction, the measured result using a film was obtained similar results with the horizontal direction 26.5cm, 21.9cm vertical direction. The relative error in the horizontal direction is 1.85% and 1.38% vertical effective beam area was also similarly distributed around the field gamma rays. As a result of the study, it was confirmed that the effectiveness of the simulation was sufficient for the gamma irradiation system. In particular, it is small relative errors in the effective beam size than the air kerma rate is considered to be due to the size of the beam is determined by geometric factors rather than the capacity of the standard source. A further study is needed to improve the reliability of the photon energy distribution diagram using simulation.