• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.134-136
• /
• 2019

The International Maritime Organization (IMO) issued 2017 Guidelines on maritime cyber risk management. In accordance with IMO's maritime cyber risk management guidelines, each flag State is required to comply with the Safety Management System (SMS) of the International Safety Management Code (ISM) that the cyber risks should be integrated and managed before the first annual audit following January 1, 2021. In this paper, to identify cyber security management targets and risk factors in the maritime sector and to conduct vulnerability analysis, we catagorized the cyber security sector in management, technical and physical sector in maritime sector based on the industry guidelines and international standards proposed by IMO. In addition, the Risk Matrix was used to conduct a qualitative risk assessment according to risk factors by cyber security sector.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.5
• /
• pp.163-170
• /
• 2023

As the development of the 4th industrial revolution in the maritime industry has accelerated, the technical development and progress of maritime autonomous surface ship(MASS), and the development of international regulations have been accelerated. In particular, the IMO Maritime Safety Committee(MSC) has established a road-map for the development of the non-mandatory goal-based MASS instrument(MASS Code) and started developing a non-mandatory MASS Code at MSC 105th meeting. Many countries are actively participating in the Correspondence Group on the development of MASS Code, and the development of detailed requirements for MASS functions in the MASS Code is underway. Especially, the concept of "Mode of Operation" for MASS functions was mentioned in the Correspondence Group for the first time, and it is expected that discussions on these modes will be conducted from the IMO MASS JWG meeting to held in April 2023. The concept of "Mode of Operation" will be useful in explaining MASS and MASS functions and will be discussed continually for the development of MASS Code. This paper reviews the contents of the IMCA M 220 document, which provides guidelines on operating modes, to conduct research on the benchmark for setting the operating modes of MASS.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.5
• /
• pp.199-206
• /
• 2023

The current software becomes the huge size of source codes. Therefore it is increasing the importance and necessity of static analysis for high-quality product. With static analysis of the code, it needs to identify the defect and complexity of the code. Through visualizing these problems, we make it guild for developers and stakeholders to understand these problems in the source codes. Our previous visualization research focused only on the process of storing information of the results of static analysis into the Database tables, querying the calculations for quality indicators (CK Metrics, Coupling, Number of function calls, Bad-smell), and then finally visualizing the extracted information. This approach has some limitations in that it takes a lot of time and space to analyze a code using information extracted from it through static analysis. That is since the tables are not normalized, it may occur to spend space and time when the tables(classes, functions, attributes, Etc.) are joined to extract information inside the code. To solve these problems, we propose a regularized design of the database tables, an extraction mechanism for quality metric indicators inside the code, and then a visualization with the extracted quality indicators on the code. Through this mechanism, we expect that the code visualization process will be optimized and that developers will be able to guide the modules that need refactoring. In the future, we will conduct learning of some parts of this process.

• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.124-135
• /
• 2007

Being called 'the period of diversity', the 21st century is taking on a new aspect which is different from the past where a certain phenomenon of a specific area was prescribed as one representative icon of a period. In particular, the globalization culture acted as the catalyst to accept such diversity and it appeared as a new culture code, 'fusion' throughout society and culture. Especially, unlike two-hour movies, the recent drama $\lceil$Gung$\rfloor$ showed various fusion style costume over a period of three months and created a sensation of fusion style costume. Therefore, this study is aimed at investigating fusion style costume by selecting the TV drama $\lceil$Gung$\rfloor$ which was on the air in 2006. Though various studies on fusion style costume, which is becoming a new culture code, have been conducted, this study is meaningful in that it's time to conduct a new study through a popular TV drama. Based on preceding studies on fusion style, the elements of fusion style were analyzed by capturing the most frequently exposed heroine's costume, and new design development introducing fusion elements was attempted for empirical studies. The study results are as follows. First, it was found that the fusion trend is a culture code which already spread to the public and is shown in the fashion in various ways. Second, the drama $\lceil$Gung$\rfloor$, is commented as a new dram which introduced the fusion style costume into Korea through a modern version of constitutional monarchy and is commented as a medium which created an interest in the fusion costume among the public as well. Third, new trend elements of the fusion style could be derived through empirical studies by design development.

• Structural Engineering and Mechanics
• /
• v.32 no.6
• /
• pp.705-724
• /
• 2009

The two major widely used building design code documents of reinforced concrete structures are the ACI 318-05 and Eurocode for the Design of Concrete Structures EC2. Therefore, a thorough comparative analysis of the provisions of these codes is required to confirm their validity and identify discrepancies in either code. In this context, provisions of flexural computations would be particularly attractive for detailed comparison. The provisions of safety concepts, design assumptions, cross-sectional moment capacity, ductility, minimum and maximum reinforcement ratios, and load safety factors of both the ACI 318-05 and EC2 is conducted with parametric analysis. In order to conduct the comparison successfully, the parameters and procedures of EC2 were reformatted and defined in terms of those of ACI 318-05. This paper concluded that although the adopted rationale and methodology of computing the design strength is significantly different between the two codes, the overall EC2 flexural provisions are slightly more conservative with a little of practical difference than those of ACI 318-05. In addition, for the limit of maximum reinforcement ratio, EC2 assures higher sectional ductility than ACI 318-05. Overall, EC2 provisions provide a higher safety factor than those of ACI 318-05 for low values of Live/Dead load ratios. As the ratio increases the difference between the two codes decreases and becomes almost negligible for ratios higher than 4.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.153-158
• /
• 2019

It is estimated that about 2,515 persons have been injured by conveyor for the past five years(2013 ~ 2017). Conveyors used in various industrial sites for transporting iron ore, coal, courier goods, etc., have various incidents such as a worker putting on or pulling a part of the body or work clothes on the driving part during maintenance. It is necessary for preventing similar accidents to conduct various researches. In order to propose the basis for revising laws and standards for the safety standards of the full cord switch to prevent conveyor accidents, this study compares Korea's Industrial Safety and Health Law (KISHL) with those of IEC, EN, Canada, and Australia. In addition, surveys of conveyor use plant and full cord switch domestic and foreign manufacturers was conducted. In this study, domestic and overseas related laws and technical standards compare and analyze to prevent conveyor accidents. In addition, we propose extension of safety certification for full code switch, establishment of safety inspection standard, and improvement of working method regulation through actual working condition investigation. It can be used as a basis for revising the occupational safety and health regulation and related notices, and thus contributing to enhancing the safe atmosphere of the conveyor business and improving the safety consciousness of the concerned persons.

• Journal of Information Technology Services
• /
• v.14 no.2
• /
• pp.129-142
• /
• 2015

The purpose of this study is to suggest an effective regression testing method in order to minimize the scope of test resulting from the modification of software and to prevent mismatch of test case and test objects. As a way to improve the efficiency of regression testing which uses a change-centric testing technique, the method flow is analyzed and grasped through a static analysis based on source code in order to identify modified parts. After the order of priority is set according to the results of user action log-based dynamic analysis on identified regression testing objects, test effect can be raised by adjusting the order of priority using code complexity. Quality assurance coverage can be checked using the user action log suggested in this study, and the progress of test and whether or not each function has been verified can be checked, too. In addition, by minimizing test parts and adjusting the order of test, costs and time can be saved, making it possible to conduct regression testing effectively.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1874-1889
• /
• 2022

In this study, we evaluate the thermal-hydraulic performance and economics of Printed Circuit Heat Exchanger (PCHE) according to the channel types and associated shape variables for the design of recuperators with Sodium-cooled Fast Reactors (SFRs). To perform the evaluations with variables such as the Reynolds number, channel types, tube diameter, and shape variables, a code for the heat exchanger is developed and verified through a comparison with experimental results. Based on the code, the volume and pressure drop are calculated, and an economic assessment is conducted. The zigzag type, which has bending angle of 80° and a tube diameter of 1.9 mm, is the most economical channel type in a SFR using CO₂ as the working fluid. For a SFR using N₂, we recommend the airfoil type with vertical and horizontal numbers of 1.6 and 1.1, respectively. The airfoil type is superior when the mass flow rate is large because the operating cost changes significantly. When the mass flow rate is small, volume is a more important design parameter, therefore, the zigzag type is suitable. In addition, we conduct a sensitivity analysis based on the production cost of the PCHE to identify changes in optimal channel types.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.27-32
• /
• 2019

Disaster Safety Management Information standardization and harmonization simplifies the process of disaster management (prevention, preparedness, response and recovery) to increase the efficiency of disaster management, it is necessary to minimize the people's life and property damage. Disaster safety standardization is to standardize disaster safety information in the past to respond to an uncertain future and systematically manage disaster safety accordingly. This study developed a standard code system to utilize disaster safety information such as earthquake, fire, and fine dust, which are of social interest among various and complex environmental disasters. It aims to support practitioners to conduct efficient disaster tasks in the event of a disaster.

• Information Systems Review
• /
• v.13 no.3
• /
• pp.15-26
• /
• 2011

RFID has substituted for a Bar Code to conduct real time data collection and data process in various fields including logistics, electronic, medical treatment, car, textile, steel industry at the business level. Although implementation and use of RFID has been facilitated constantly, the majority of businesses hesitate to implement RFID system. Hence in this study, we conducted a performance evaluation through quantitative/qualitative analysis on case studies in various industries. This study results could be utilized as basic data for RFID system diffusion, and it will primarily contribute to spread of RFID system implementation.