• 천문학회보
• /
• 제42권2호
• /
• pp.63.3-64
• /
• 2017

KIC6118779 is an over-contact binary system having a short orbital period of about 0.36 days. The photometric data for this system are acquired by the observations of Kepler mission in the long cadence mode having a time resolution of about 30 minutes. It means that the Kepler light curves of the system may be strongly affected by phase smearing effect and the analysis of them without consideration of the phase smearing effect may result in wrong stellar properties. Additionally, this system also shows dynamical variation of light curve resulting from spot activity. For all those reasons, it is difficult to investigate KIC6118779, and the investigation should be carried out carefully. In this presentation, we introduce the phase smearing effect and carry out the light curve modeling with the 2015 version of the Wilson-Devinney binary code considering the phase smearing effect. Our results show that the system is a deep over contact binary system and has extremely low mass ratio of about 0.12. Moreover our spot modeling implies the cyclic migration of a big cool spot on the massive component.

• ETRI Journal
• /
• 제20권4호
• /
• pp.346-360
• /
• 1998

It is challenging to parallelize problems with irregular computation and communication. In this paper, we propose an asynchronous algorithm for balancing unpredictable workload on distributed-memory machines. By using an initial workload estimate, we first partition the computations such that the workload is distributed evenly across the processors. In addition, we perform task migrations dynamically for adapting to the evolving workload. To demonstrate the usefulness of our load balancing strategy, we conducted experiments on an IBM SP2 and a Cray T3D. Experimental results show that our task migration strategy can balance unpredictable workload with little overhead. Our code using C and MPI is portable onto other distributed-memory machines.

• 정보처리학회논문지D
• /
• 제10D권7호
• /
• pp.1155-1160
• /
• 2003

본 논문은 분산 서버 환경에서 다양한 업무를 운영하려고 할 때에 발생되는 보안상의 문제를 해결하기 위하여 RBAC(Role Based Access Control) 기법을 이용하여 분산 환경에서 운영 가능한 역할 위임을 위한 확장된 RBAC(Extended RBAC: ERBAC) 모형을 설계하였다. ERBAC는 기본적으로 Sandhu 등이 제안한 RBAC96 모형에 역할 위임부분을 추가하였다. 따라서, 역할을 위임하기 위해 ERBAC를 이용하면 사용자 수준의 역할 위임이 가능하여 업무의 중단 없이 영속성을 보장할 수 있다. 또한 분산 서버의 소스코드 수정 없이 구현 가능하고, 이식성이 높으며, 보안 관리가 단순하고 용이하다는 장점을 갖는다.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.551-555
• /
• 2017

Tissue optics is a well-established and extensively studied area. In the last decades, Monte Carlo simulation (MCS) has been one of the standard tools for simulation of light propagation in turbid media. The utilization of parallel processing exhibits dramatic increase in the speed of MCS's of photon migration. Some calculations based on MCS can be completed within a few seconds. Since the MCS's have the potential to become a real time calculation method, a dynamic accuracy estimation, which is also known as history by history statistical estimators, is required in the simulation code to automatically terminate the MCS as the results' accuracy achieves a high enough level. In this work, spatial and time-domain GPU-based MCS, adopting the dynamic accuracy estimation, are performed to calculate the light dose/reflectance in homogeneous and heterogeneous tissue media. This dynamic accuracy estimation can effectively derive the statistical error of optical dose/reflectance during the parallel Monte Carlo process.

• 한국통신학회논문지
• /
• 제17권7호
• /
• pp.656-665
• /
• 1992

In this paper, the performance of the various multiple access techniques for the mobile computer network has been studiedi in the consideration of the charactersitics of the mobile cimmunication channel. In the case of the hidden node occurring. It could be seen that the performance of the code division multiple access (CDMA) technique with simultaneous access function is better than that of the other packet access methods such as carrier sendsed multiple access (CDMA), busy tone multiple access (BTMA) and idle signal multiple access (ISMA) in the view of the throughput and mean delay time. Also, it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access (CSMA), etc. when the fading effect or impulsive noise exists in the mobile channel, Especially, in the case of the distributed mobile network it has been shown that the receivertransmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.45-55
• /
• 2010

FDD를 사용하는 영역에서는 LTE-FDD가 "4G" 무선 광대역 엑세스의 강력한 후보기술의 하나로 여겨지는 한편, 최근 LTE-TDD가 TD-SCDMA의 진화 경로 및 일부 경우에는 WiMAX-TDD에 대한 진화 경로로서 떠오르고 있다. 본 논문에서는 LTE-TDD에 관하여 다음의 두 가지 조합의 듀얼모드 구현에 대한 실현가능성을 분석한다: 듀얼모드 LTE-FDD/TDD 및 듀얼모드 WiMAX-TDD/LTE-TDD. LTE-FDD 및 LTE-TDD 사이의 시스템 파라미터, 용어사용 및 프레임 구조에서의 공통성에 따라 듀얼모드 LTE-FDD/TDD가 비용면에서 효율적으로 구현이 가능함을 보인다. 또한, 스케줄링 알고리즘, 제어 메카니즘 및 지원하는 스펙트럼 대역에서의 공통성에 따라 듀얼모드 WiMAX-TDD/LTE-TDD 역시 비용면에서 효율적으로 구현이 가능함을 보인다. 시스템 파라미터 및 프레임 구조에서의 공통성은 칩을 구현하는데 매우 중요한 부분이며, 알고리즘 및 제어 메카니즘에서의 공통성은 구현된 칩이 얼마나 잘 동작하느냐에 매우 중요한 부분임을 주목한다.

• Journal of Welding and Joining
• /
• 제1권2호
• /
• pp.45-52
• /
• 1983

Many pressure vessels for the hot H$\sub$2//H$\sub$2/S service are made of 2+1/4Cr-1Mo steel with austenitic stainless steel overlay to combat agressive corrosion due to hydrogen sulfide. Hydrogen dissolves in to materials during operation, and sometimes gives rise to unfore-seeable damages. Appropriate precautions must, therefore, be taken to avoid the hydrogen induced damages in the design, fabrication and operation stage of such reactor vessels. Recently, hydrogeninduced cracking (or Disbonding) was found at the interface between base metal and stainless weld overlay of a desulfurizing reactor. Since the stainless steel overlay weld metal is subjected to thermal and internal-pressure loads in reactor operation, it is desirable for the overlay weld metal to have high strength and ductility from the stand point of structural safety. In section III of ASME Boiler and Pressure Vessel Code, Post-Weld Heat Treatment(PWHT) of more than one hour per inch at over 1100.deg. F(593.deg. C) is required for the weld joints of low alloy pressure vessel steels. This heat treatment to relieve stresses in the welded joint during construction of the pressure vessel is considered to cause sensitization of the overlay weld metal. The present study was carried out to make clear the diffusion of carbon migration by PWHT in dissimilar metal welded joint. The main conclusion reached from this study are as follows: 1) The theoretical analysis for diffusion of carbon in stainless steel overlay weld metal does not agree with Fick's 2nd law but the general law of molecular diffusion phenomenon by thermodynamic chemical potential. 2) In the stainless steel overlay welded joint, the PWHT at 720.deg. C for 10 hours causes a diffusion of carbon atoms from ferritic steel into austenitic steel according to the theoretical analysis for carbon migration and its experiment. 3) In case of PWHT at 720.deg. C for 10 hours, the micro-hardness of stainless steel weld metal in bonded zone increase very highly in the carburized layer with remarkable hardening than that of weld metal.

• 방사성폐기물학회지
• /
• 제18권2_spc호
• /
• pp.305-315
• /
• 2020

방사성폐기물의 심층처분에서 생물권에서의 방사성 핵종 이동을 핵종의 이동 경과 시간을 계산하여 평가하는 방법이 제안되었다. 방사성 핵종은 자연 방벽에서 유출되어 지하 천부의 지하수 흐름을 따라 대규모 지표수체에 도달한다고 가정하였다. 생물권은 기반암 위에 있는 대수층을 포함하는 천부 지하 환경으로 정의하였다. 제안된 방법을 이용하여, 계산 알고리즘을 수립하였고, 알고리즘을 수행하는 컴퓨터 코드를 작성하였다. 작성된 코드는 간단한 사례에서 계산된 모의 결과를 해석해 계산 결과 및 지표 부근에서의 방사성 핵종 이동에 의한 방사선량 평가에 널리 이용되는 공공 프로그램의 계산 결과와 비교하여 검증하였다. 사례 연구 조건을 가상의 심층처분장에서의 방사성 핵종 이동에 대한 이전 연구를 통해 작성하였다. 작성된 코드는 사례 연구에서 생물권의 하천으로 유출되는 핵종의 이동량을 계산하였다. 이전 연구에서는 가상의 처분장에서 모암까지의 방사성핵종의 이동만을 보여주었기 때문에, 이 코드는 모든 경로를 지나가는 방사성 핵종의 전체적인 이동을 파악하는데 도움이 될 수 있었다.

• Geomechanics and Engineering
• /
• 제2권2호
• /
• pp.141-156
• /
• 2010

In the framework of meshfree methods, a new methodology is developed based on radial point interpolation method (RPIM). This methodology is applied to a one-dimensional contaminant transport modelling in the saturated porous media. The one-dimensional form of advection-dispersion equation involving reactive contaminant is considered in the analysis. The Galerkin weak form of the governing equation is formulated using 1D meshfree shape functions constructed using thin plate spline radial basis functions. MATLAB code is developed to obtain the numerical solution. Numerical examples representing various phenomena, which occur during migration of contaminants, are presented to illustrate the applicability of the proposed method and the results are compared with those obtained from the analytical and finite element solutions. The proposed RPIM has generated results with no oscillations and they are insensitive to Peclet constraints. In order to test the practical applicability and performance of the RPIM, three case studies of contaminant transport through the landfill liners are presented. A good agreement is obtained between the results of the RPIM and the field investigation data.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.15-19
• /
• 2015

A fishway is a structure on or around artificial and natural barriers, such as dams, locks and waterfalls, to help fishes' natural migration. In this paper, a computational fluid dynamics (CFD) code, termed SNUFOAM is used to analyze vertical hydraulic characteristic of rollway of fishway. Volume-of-fluid (VOF) method was used to handle free-surface. It is important to determine the factors influencing flow characteristics in fishway because fish use directional information from the flow characteristics to navigate through fishway. Fishway was modeled in 2-D and the influence of the stream velocity, slope, and weir height of fishway was tested. In results, the transition Reynolds number was $2{\times}10^5{\sim}3{\times}10^5$.