• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.140-146
• /
• 1999

This research was conducted to investigate the changes of $NH_4-N$ in soil, nitrogen uptake by rice plant, nitrogen-use efficiency and rice yield by the application of latex coated urea(LCU) on 10-day old seedling transplanted with machine on paddy field, Jeonbuk series at the Honam area, from 1997 to 1998. Almost all nitrogen in LCU application as basal dressing in whole layer was dissolved until maximum tiller stage, the maximum dissolution time was productive tiller stage and $NH_4-N$ content of conventional plot with surface application of fertilizer were lowered at full periods. Nitrogen deficiency symptom were appeared at heading stage of 31.6% SPAD value and nitrogen concentration was 1.29% shoot. From heading stage to ripening stage, the necessity of nitrogen-fertilizer was $2.9kg\;ha^{-1}$ for the conventional split application plot and $11.9kg\;ha^{-1}$ for the whole layer application plot of LCU basal dressing. Nitrogen-use efficiency was higher at the LCU application plot than the conventional application plot and was increased for 12.7% by fertilization at panicle forming stage. The additional fertilization at panicle forming stage to basal dressing of LCU causes 13% yield increase.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.2
• /
• pp.112-117
• /
• 2002

This study was conducted to investigate effects on the co-situs application of coated urea complex fertilizer in dry seeded rice in Dukpyong series soil. Number of spikelet established in 15 days after seeding, conventional plot was $120ea\;per\;m^2$. and whole layer placement(WLP), co-situs application 70%(CSA70%) plot and co-situs application 50%(CSA50%) plot were 146, 126 and $120ea\;per\;m^2$, respectively. There was not concentration obstacle in co-situs application plot in spite of closing application between seed and coated urea complex fertilizer. The amount of $NH_4-N$ into soil solution in different growth stage was highest in WLP 70% plot compare to other treatment. N uptaken amount was highest in CSA 70% plot as $94kg\;ha^{-1}$ compare to $90kg\;ha^{-1}$ of WLP 79% plot and $82kg\;ha^{-1}$ of CSA 50% plot. However, N use efficiency of CSA 50% plot was highest among treatments as 48%. Rice yield was highest in CSA 70% plot as 102% compared to conventional plot.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.189-199
• /
• 2009

The Powder characteristics and sintering behavior of $SiO_2$ coated $BaTiO_3$ were studied. $BaTiO_3$ powders were synthesized by the liquid mix method developed by Pechini, and silica coating was prepared by alkoxide hydrolysis method with TEOS and ethanol. The particle size of the $BaTiO_3$ powders was 35 nm and the thickness of the $SiO_2$ coating layer was 5 nm. As the $SiO_2$ content increased, the $SiO_2$ layers improved the powder dispersion by increasing electrostatic repulsion between the $BaTiO_3$ particles. Effects of MgO coating on microstructure and dielectric properties of $BaTiO_3$ have been studied compared with mechanically MgO mixed $BaTiO_3$. MgO coated $BaTiO_3$ particles were prepared by a homogeneous precipitation method using $MgCl_2\cdot 6H_2O$ and urea. MgO coated $BaTiO_3$ exhibited homogeneous microstructure compared with mixed samples. XRD analysis revealed that Mg substitution for the Ti site in the MgO mixed sample was much greater than in the coated one. Electrical properties of MgO mixed and coated $BaTiO_3$ were affected by the diffusion behavior of Mg in $BaTiO_3$ lattice.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.150-150
• /
• 2009

We prepared the Au-coated $TiO_2$ (Au/$TiO_2$) nanoparticles by deposition-precipitation (DP) method with and without bases (urea or NaOH) and investigated the effects of pH on the preparation of Au/$TiO_2$ nanoparticles for various kinds of bases. For the DP method without bases, the Au nanoparticles in the diameter of about 50 nm were generated in the solution by the reduction reaction with trisodium citrate and they did not deposit on the surface of $TiO_2$. For the DP method with bases, Au precursors deposited on the surface of $TiO_2$ and then reduced to the Au nanoparticles in the diameter of 4-5 nm on the surface of $TiO_2$ by the reaction with trisodium citrate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.3
• /
• pp.259-265
• /
• 1998

A field experiment was conducted to investigate changes of $NH_4-N$, N uptake, N use efficiency and rice yield by the Latex coated urea(LCU) application on wet-seeding rice from 1994 to 1997. Nitrogen deficiency symptom appeared when LCU was applied as basal dressing continuously until the ripening stage during normal temperature year, but was completed at heading stage during year at high temperature. Percentage recovery of fertilizer N was higher in LCU than in urea but decreased in high temperature. Turn over of N applied as LCU to grain increased more during years high temperature than the normal year. Rice yield with LCU treatment compared to conventional treatment was similar during the normal year but decreased by 6% during year of high temperature. Top dressing of urea at panicle initiation stage in addition to basal dressing of LCU increased rice yield to 12%.

• Journal of Powder Materials
• /
• v.12 no.6 s.53
• /
• pp.413-421
• /
• 2005

Copper is able to work as a current collector under wide range of hydrocarbon fuels without coking in Solid oxide fuel cells (SOFCs). The application of copper in SOFC is limited due to its low melting point, which result in coarsening the copper particle. This work focuses on the sintering of copper powder with ceria coating layer. Ceria-coated powder was prepared by thermal decomposition of urea in $Ce(NO_3)_3\cdot6H_2O$ solution, which containing CuO core particles. The ceria-coated powder was characterized by XRD, ICP, and SEM. The thermal stability of the ceria-coated copper in fuel atmosphere $(H_2)$ was observed by SEM. It was found that the ceria coating layer could effectively hinder the grain growth of the copper particles.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.1-8
• /
• 2017

An experimental study is needed a reinforcing method for seismic load to apply for RC structures because a lot of earthquakes have frequently happened in the world and those also collapsed infrastructures or damaged human lives. The reinforcing effect of PolyUrea (PU) appeared to be excellent under blast and impact about RC structures. In this study, Stiff Type PolyUrea (STPU) had developed by manipulating the ratio of the components of prepolymer and hardener of PU. And the durability performance evaluation of STPU for deterioration and chemical resistance has been performed. Acid environmental exposure test and ultraviolet (UV) exposure test have been performed as the durability performance evaluation for STPU. Concrete carbonation exposure test and freezing and thawing test for concrete coated with STPU have been performed. The experimental result showed that STPU has high resisting capacity and durability in all tests. Therefore, STPU would be used as seismic reinforcement materials.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.2
• /
• pp.136-143
• /
• 2002

Emission of methane and nitrous oxide affected by nitrogen fertilizer materials were measured simultaneously in rice paddy fields under flooding and intermittent irrigation in 2000. Studies focused on mitigating $CH_4$ emission from rice paddy fields are summarized and the possibilities and limits applied to world's rice cultivation are discussed. The mitigation options are water management, soil amendments, organic matter management, different tillage, rotation, and cultivar selection. Altering water management, in particular promoting midseason aeration by short-term drainage, is one of the most promising strategies, although these practices may be limited to the rice paddy fields where the irrigation system is well prepared. The test site was divided into two water managements: a continuously flooded plot which was maintained flooded by constant irrigation from May to September, and an intermittently drained plot in which short-term (20days) draining practices were performed one times during the flooding period. By total emission of GHGs converted by global warming potential (GWP), flooding plots were higher 170$\sim$208% than interimittent irrigation plots. For emission of GHGs in fertilizer materials, it was high in the order of Swine slurry>Urea+Rice straw>Urea>LCU. Basing on GHGs emission of urea fertilization under flooding as baseline GWP of urea fertilization and Latex-coated urea under intermittent irrigation showed lower GHGs emission by 41.4% and 55.8 respectively. In this case fertilizer use efficiency (kg unhulled rice/ of applied N) were 18.2$\sim$20.2 and 18.7$\sim$19.0 and 9.3 and 5.8$\sim$6.6 for Swine slurry and LCU and Urea+Rice straw and Urea in the continuously flooded and intermittently drained plot.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.173-180
• /
• 2004

Nano sized ZnO particle as 20-30nm applies for material, pigments, rubber additives, gas sensors, varistors, fluorescent substance as well as new material such as photo-catalyst, sensitizer, fluorescent material. ZnO with a particle size in the range 20-30nm has provided to be an excellent UV blocking material in the cosmetics industry, which can be used in sunscreen product to enhance the sun protection factor and natural makeup effect. But pure ZnO particles application limits for getting worse wearing feeling. We make high-functional inorganic-composite that coated with nano-ZnO on the plate-type particle such as sericite, boron nitride and bismuthoxychloride. In this experiment, we synthesized composite powder using hydrothermal precipitation method. The starting material was ZnCl$_2$ Precipitation materials were used hexamethylenetetramine(HMT) and urea. We make an experiment with changing as synthesis factors that are concentrations of starting material, precipitation materials, nuclear formation material, reaction time, and reaction temperature. We analyzed composite powder's shape, crystallization and UV-blocking ability with FE-SEM, XRD, FT-IR, TGA-DTA, In vitro SPF test. The user test was conducted by product's formulator. In the results of this study, nanometer sized ZnD was coated regardless of the type of plate-powder at fixed condition range. When the coated plate-powders were applied in pressed powder product, the glaze of powder itself decreased, but natural make-up effect, spreadability, and adhesionability were increased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.4
• /
• pp.213-219
• /
• 1973

Effects of three slow-release nitrogen fertilizers (Sulfur-coated urea, (SCU) Jin Hae Chemical Co. Korea(JHC); Tennessee Valley Authority. U.S.A(TVA); METAP, Japan) on the yield and nitrogen uptake of IR667 (Suwon 213) were investigated comparing with urea split application under the field condition with early and usual saeson cultivation. 1. SCU(JHC) was not superior than urea split application in yield and nitrogen nutrition due to early release of nitrogen. 2. SCU(TVA) outyielded urea split by 10% showed always highest nitrogen content in straw and most balanced relative cumulative curve of nitrogen uptake or dry matter yield. 3. At ear formation stage SCU(TVA) showed specially high nitrogen content which was highly correlated with number of grain per $m^2$ of field. 4. Only SCU(TVA) showed one peak curve of nitrogen uptake rate at ear formation stage while others showed two peak pattern. 5. nitrogen fertilizer recovery of slow-release fertilizers was higher than urea split in early season cultivation and SCU (TVA) (46.0) was higher but SCU(JHC) (38.9) was similar in compare with urea split(37.1) in usual season cultivation. 6. Most promising slow-release nitrogen to match plant requirement seems to be one mixed of various slow-release fertilizers having different release pattern.