• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.658-664
• /
• 2013

Bending actuators composed of cellulose with an electrically conducting polymer (CP) are fabricated and their performance is characterized in the air. Two different counter ions, perchlorate and tetrafluoroborate are used as dopant ions in the polyaniline CP processing. CP-cellulose-CP trilayer and CP-cellulose bilayer samples are fabricated with different dopant ions, and their actuation performance is evaluated in terms of tip displacement, blocked force and electrical power consumption along with the humidity level and actuation frequency. The trilayer samples substantially enhanced the tip displacement compared to the bilayer ones. The actuation performance of the trilayer actuator is three times better than that of original cellulose electro-active paper (EAPap) actuator. The displacement and blocked force of CP-EAPap actuators are dependent on the humidity and frequency.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.28-36
• /
• 2014

The kind and the mixing ratio of recovered papers would affect the quality of final recycled paper. In this study, effects of the mixing ratio of various domestic recycled papers (old news print (ONP), old corrugated container (OCC) and coated paper (CP)) on variations in physical properties of paper and its productivity were investigated. When the mixing ratio of CP grade increased, the freeness (CSF) of recycled pulp was increased while paper strength and white water turbidity was decreased. Paper strength was decreased as the percentage of OCC was higher than ONP. When ONP was mixed with OCC, no adverse effect was observed except the increased drainage resistance. It is expected that these results could be utilized as fundamental data to establish regulations for the recovered paper grades according to mixing ratios of different kinds of them.

• 한국자기학회지
• /
• 제9권2호
• /
• pp.121-126
• /
• 1999

친수성 철계 자성유체의 제조와 이 자성유체를 Nd-영구자석과 병용하여 기름 밀봉 장치의 개발을 목적으로 실험검토한 결과 다음과 같은 결론을 얻었다. 1)평균 입경 100$\AA$, 자화값 125.5emu/g, 대기중 15$0^{\circ}C$까지 산화 변질성이 없는 실리카 피착 철 초미립자의 표면에 오레인산 이온, D.B.S. 이온 및 T.M.A. 이온을 흡착한 후 ethylene glycol 용액중에 분산시켜 친수성 철 분말 자성유체를 제조할 수 있었다. 2)이상의 친수성 철 분말 자성유체[70%(g/ )Fe]를 영구자석(3200 Gauss)과 병용하여 기름 밀봉 장치에 응용한 결과 영구자석의 설치 개수를 영구자석 6단 그리고 구동축과 밀봉 장치 사이 간격 0.2mm의 조건에서 압력 7400g/$\textrm{cm}^2$까지 견딜 수 있는 우수한 내압 특성을 얻었다.